Re: [PATCH v3 17/27] powerpc/powernv/pmem: Implement the Read Error Log command

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/2/20 2:27 pm, Alastair D'Silva wrote:
From: Alastair D'Silva <alastair@xxxxxxxxxxx>

The read error log command extracts information from the controller's
internal error log.

This patch exposes this information in 2 ways:
- During probe, if an error occurs & a log is available, print it to the
   console
- After probe, make the error log available to userspace via an IOCTL.
   Userspace is notified of pending error logs in a later patch
   ("powerpc/powernv/pmem: Forward events to userspace")

Signed-off-by: Alastair D'Silva <alastair@xxxxxxxxxxx>

A few minor style checks at https://openpower.xyz/job/snowpatch/job/snowpatch-linux-checkpatch/11787//artifact/linux/checkpatch.log

We should also add some documentation for the user interfaces we're adding (same applies for all the remaining patches in this series that add more interfaces).

---
  arch/powerpc/platforms/powernv/pmem/ocxl.c    | 269 ++++++++++++++++++
  .../platforms/powernv/pmem/ocxl_internal.h    |   1 +
  include/uapi/nvdimm/ocxl-pmem.h               |  46 +++
  3 files changed, 316 insertions(+)
  create mode 100644 include/uapi/nvdimm/ocxl-pmem.h

diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl.c b/arch/powerpc/platforms/powernv/pmem/ocxl.c
index 63109a870d2c..2b64504f9129 100644
--- a/arch/powerpc/platforms/powernv/pmem/ocxl.c
+++ b/arch/powerpc/platforms/powernv/pmem/ocxl.c
@@ -447,10 +447,219 @@ static int file_release(struct inode *inode, struct file *file)
  	return 0;
  }
+/**
+ * error_log_header_parse() - Parse the first 64 bits of the error log command response
+ * @ocxlpmem: the device metadata
+ * @length: out, returns the number of bytes in the response (excluding the 64 bit header)
+ */
+static int error_log_header_parse(struct ocxlpmem *ocxlpmem, u16 *length)
+{
+	int rc;
+	u64 val;
+
+	u16 data_identifier;
+	u32 data_length;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset,
+				     OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		return rc;
+
+	data_identifier = val >> 48;
+	data_length = val & 0xFFFF;
+
+	if (data_identifier != 0x454C) { // 'EL'
+		dev_err(&ocxlpmem->dev,
+			"Bad data identifier for error log data, expected 'EL', got '%2s' (%#x), data_length=%u\n",
+			(char *)&data_identifier,
+			(unsigned int)data_identifier, data_length);
+		return -EINVAL;

This should be something other than EINVAL I think

+	}
+
+	*length = data_length;
+	return 0;
+}
+
+static int error_log_offset_0x08(struct ocxlpmem *ocxlpmem,
+				 u32 *log_identifier, u32 *program_ref_code)
+{
+	int rc;
+	u64 val;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x08,
+				     OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		return rc;
+
+	*log_identifier = val >> 32;
+	*program_ref_code = val & 0xFFFFFFFF;
+
+	return 0;
+}
+
+static int read_error_log(struct ocxlpmem *ocxlpmem,
+			  struct ioctl_ocxl_pmem_error_log *log, bool buf_is_user)
+{
+	u64 val;
+	u16 user_buf_length;
+	u16 buf_length;
+	u16 i;
+	int rc;
+
+	if (log->buf_size % 8)
+		return -EINVAL;
+
+	rc = ocxlpmem_chi(ocxlpmem, &val);
+	if (rc)
+		goto out;
+
+	if (!(val & GLOBAL_MMIO_CHI_ELA))
+		return -EAGAIN;
+
+	user_buf_length = log->buf_size;
+
+	mutex_lock(&ocxlpmem->admin_command.lock);
+
+	rc = admin_command_request(ocxlpmem, ADMIN_COMMAND_ERRLOG);
+	if (rc)
+		goto out;
+
+	rc = admin_command_execute(ocxlpmem);
+	if (rc)
+		goto out;
+
+	rc = admin_command_complete_timeout(ocxlpmem, ADMIN_COMMAND_ERRLOG);
+	if (rc < 0) {
+		dev_warn(&ocxlpmem->dev, "Read error log timed out\n");
+		goto out;
+	}
+
+	rc = admin_response(ocxlpmem);
+	if (rc < 0)
+		goto out;
+	if (rc != STATUS_SUCCESS) {
+		warn_status(ocxlpmem, "Unexpected status from retrieve error log", rc);
+		goto out;
+	}
+
+
+	rc = error_log_header_parse(ocxlpmem, &log->buf_size);
+	if (rc)
+		goto out;
+	// log->buf_size now contains the returned buffer size, not the user size

In the event that the log is truncated to fit the user buffer, we return the full log size, I assume this is intentional to signal it's truncated as per the nd stuff?

+
+	rc = error_log_offset_0x08(ocxlpmem, &log->log_identifier,
+				       &log->program_reference_code);
+	if (rc)
+		goto out;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x10,
+				     OCXL_LITTLE_ENDIAN, &val);
+	if (rc)
+		goto out;
+
+	log->error_log_type = val >> 56;
+	log->action_flags = (log->error_log_type == OCXL_PMEM_ERROR_LOG_TYPE_GENERAL) ?
+			    (val >> 32) & 0xFFFFFF : 0;
+	log->power_on_seconds = val & 0xFFFFFFFF;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x18,
+				     OCXL_LITTLE_ENDIAN, &log->timestamp);
+	if (rc)
+		goto out;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x20,
+				     OCXL_HOST_ENDIAN, &log->wwid[0]);
+	if (rc)
+		goto out;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x28,
+				     OCXL_HOST_ENDIAN, &log->wwid[1]);
+	if (rc)
+		goto out;
+
+	rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+				     ocxlpmem->admin_command.data_offset + 0x30,
+				     OCXL_HOST_ENDIAN, (u64 *)log->fw_revision);

Why the difference between HOST and LITTLE_ENDIAN between these fields?

+	if (rc)
+		goto out;
+	log->fw_revision[8] = '\0';
+
+	buf_length = (user_buf_length < log->buf_size) ?
+		     user_buf_length : log->buf_size;
+	for (i = 0; i < buf_length + 0x48; i += 8) {

+ 0x48 here doesn't look right...

+		u64 val;
+
+		rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu,
+					     ocxlpmem->admin_command.data_offset + i,

...did you mean to add 0x48 here?

+					     OCXL_HOST_ENDIAN, &val);
+		if (rc)
+			goto out;
+
+		if (buf_is_user) {
+			if (copy_to_user(&log->buf[i], &val, sizeof(u64))) {
+				rc = -EFAULT;
+				goto out;
+			}
+		} else
+			log->buf[i] = val;

Please use braces consistently on both sides of if/else.

+	}
+
+	rc = admin_response_handled(ocxlpmem);
+	if (rc)
+		goto out;
+
+out:
+	mutex_unlock(&ocxlpmem->admin_command.lock);
+	return rc;
+
+}
+
+static int ioctl_error_log(struct ocxlpmem *ocxlpmem,
+		struct ioctl_ocxl_pmem_error_log __user *uarg)
+{
+	struct ioctl_ocxl_pmem_error_log args;
+	int rc;
+
+	if (copy_from_user(&args, uarg, sizeof(args)))
+		return -EFAULT;
+
+	rc = read_error_log(ocxlpmem, &args, true);
+	if (rc)
+		return rc;
+
+	if (copy_to_user(uarg, &args, sizeof(args)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long file_ioctl(struct file *file, unsigned int cmd, unsigned long args)
+{
+	struct ocxlpmem *ocxlpmem = file->private_data;
+	int rc = -EINVAL;
+
+	switch (cmd) {
+	case IOCTL_OCXL_PMEM_ERROR_LOG:
+		rc = ioctl_error_log(ocxlpmem,
+				     (struct ioctl_ocxl_pmem_error_log __user *)args);
+		break;
+	}
+	return rc;
+}
+
  static const struct file_operations fops = {
  	.owner		= THIS_MODULE,
  	.open		= file_open,
  	.release	= file_release,
+	.unlocked_ioctl = file_ioctl,
+	.compat_ioctl   = file_ioctl,
  };
/**
@@ -527,6 +736,60 @@ static int read_device_metadata(struct ocxlpmem *ocxlpmem)
  	return 0;
  }
+static const char *decode_error_log_type(u8 error_log_type)
+{
+	switch (error_log_type) {
+	case 0x00:
+		return "general";
+	case 0x01:
+		return "predictive failure";
+	case 0x02:
+		return "thermal warning";
+	case 0x03:
+		return "data loss";
+	case 0x04:
+		return "health & performance";
+	default:
+		return "unknown";
+	}
+}
+
+static void dump_error_log(struct ocxlpmem *ocxlpmem)
+{
+	struct ioctl_ocxl_pmem_error_log log;
+	u32 buf_size;
+	u8 *buf;
+	int rc;
+
+	if (ocxlpmem->admin_command.data_size == 0)
+		return;
+
+	buf_size = ocxlpmem->admin_command.data_size - 0x48;
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	log.buf = buf;
+	log.buf_size = buf_size;
+
+	rc = read_error_log(ocxlpmem, &log, false);
+	if (rc < 0)
+		goto out;
+
+	dev_warn(&ocxlpmem->dev,
+		 "OCXL PMEM Error log: WWID=0x%016llx%016llx LID=0x%x PRC=%x type=0x%x %s, Uptime=%u seconds timestamp=0x%llx\n",
+		 log.wwid[0], log.wwid[1],
+		 log.log_identifier, log.program_reference_code,
+		 log.error_log_type,
+		 decode_error_log_type(log.error_log_type),
+		 log.power_on_seconds, log.timestamp);
+	print_hex_dump(KERN_WARNING, "buf", DUMP_PREFIX_OFFSET, 16, 1, buf,
+		       log.buf_size, false); > +
+out:
+	kfree(buf);
+}
+
  /**
   * probe_function0() - Set up function 0 for an OpenCAPI persistent memory device
   * This is important as it enables templates higher than 0 across all other functions,
@@ -568,6 +831,7 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
  	struct ocxlpmem *ocxlpmem;
  	int rc;
  	u16 elapsed, timeout;
+	u64 chi;
if (PCI_FUNC(pdev->devfn) == 0)
  		return probe_function0(pdev);
@@ -667,6 +931,11 @@ static int probe(struct pci_dev *pdev, const struct pci_device_id *ent)
  	return 0;
err:
+	if (ocxlpmem &&
+		    (ocxlpmem_chi(ocxlpmem, &chi) == 0) &&
+		    (chi & GLOBAL_MMIO_CHI_ELA))
+		dump_error_log(ocxlpmem);
+
  	/*
  	 * Further cleanup is done in the release handler via free_ocxlpmem()
  	 * This allows us to keep the character device live to handle IOCTLs to
diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
index d2d81fec7bb1..b953ee522ed4 100644
--- a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
+++ b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h
@@ -5,6 +5,7 @@
  #include <linux/cdev.h>
  #include <misc/ocxl.h>
  #include <linux/libnvdimm.h>
+#include <uapi/nvdimm/ocxl-pmem.h>
  #include <linux/mm.h>
#define LABEL_AREA_SIZE (1UL << PA_SECTION_SHIFT)
diff --git a/include/uapi/nvdimm/ocxl-pmem.h b/include/uapi/nvdimm/ocxl-pmem.h
new file mode 100644
index 000000000000..b10f8ac0c20f
--- /dev/null
+++ b/include/uapi/nvdimm/ocxl-pmem.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/* Copyright 2017 IBM Corp. */
+#ifndef _UAPI_OCXL_SCM_H
+#define _UAPI_OCXL_SCM_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define OCXL_PMEM_ERROR_LOG_ACTION_RESET	(1 << (32-32))
+#define OCXL_PMEM_ERROR_LOG_ACTION_CHKFW	(1 << (53-32))
+#define OCXL_PMEM_ERROR_LOG_ACTION_REPLACE	(1 << (54-32))
+#define OCXL_PMEM_ERROR_LOG_ACTION_DUMP		(1 << (55-32))
+
+#define OCXL_PMEM_ERROR_LOG_TYPE_GENERAL		(0x00)
+#define OCXL_PMEM_ERROR_LOG_TYPE_PREDICTIVE_FAILURE	(0x01)
+#define OCXL_PMEM_ERROR_LOG_TYPE_THERMAL_WARNING	(0x02)
+#define OCXL_PMEM_ERROR_LOG_TYPE_DATA_LOSS		(0x03)
+#define OCXL_PMEM_ERROR_LOG_TYPE_HEALTH_PERFORMANCE	(0x04)
+
+struct ioctl_ocxl_pmem_error_log {
+	__u32 log_identifier; /* out */
+	__u32 program_reference_code; /* out */
+	__u32 action_flags; /* out, recommended course of action */
+	__u32 power_on_seconds; /* out, Number of seconds the controller has been on when the error occurred */
+	__u64 timestamp; /* out, relative time since the current IPL */
+	__u64 wwid[2]; /* out, the NAA formatted WWID associated with the controller */
+	char  fw_revision[8+1]; /* out, firmware revision as null terminated text */
+	__u16 buf_size; /* in/out, buffer size provided/required.
+			 * If required is greater than provided, the buffer
+			 * will be truncated to the amount provided. If its
+			 * less, then only the required bytes will be populated.
+			 * If it is 0, then there are no more error log entries.
+			 */
+	__u8  error_log_type;
+	__u8  reserved1;
+	__u32 reserved2;
+	__u64 reserved3[2];
+	__u8 *buf; /* pointer to output buffer */
+};
+
+/* ioctl numbers */
+#define OCXL_PMEM_MAGIC 0x5C
+/* SCM devices */
+#define IOCTL_OCXL_PMEM_ERROR_LOG			_IOWR(OCXL_PMEM_MAGIC, 0x01, struct ioctl_ocxl_pmem_error_log)
+
+#endif /* _UAPI_OCXL_SCM_H */


--
Andrew Donnellan              OzLabs, ADL Canberra
ajd@xxxxxxxxxxxxx             IBM Australia Limited





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux