mm people: This series contains a "pretty small" common code memory management change that will allow paging, guest backing with files etc almost just like normal VMs. It should be a no-op for all architectures not opting in. And it should be usable for others that also try to get notified on "the pages are in the process of being used for things like I/O". This time I included error handling and an ACK from Will Deacon. mm-related patches CCed on linux-mm, the complete list can be found on the KVM and linux-s390 list. Andrew, any chance to either take " mm:gup/writeback: add callbacks for inaccessible pages" or ACK so that I can take it? Overview -------- Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's state like guest memory and guest registers anymore. Instead the PVMs are mostly managed by a new entity called Ultravisor (UV), which provides an API, so KVM and the PV can request management actions. PVMs are encrypted at rest and protected from hypervisor access while running. They switch from a normal operation into protected mode, so we can still use the standard boot process to load a encrypted blob and then move it into protected mode. Rebooting is only possible by passing through the unprotected/normal mode and switching to protected again. All patches are in the protvirtv4 branch of the korg s390 kvm git https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git/log/?h=protvirtv5 Claudio presented the technology at his presentation at KVM Forum 2019. https://static.sched.com/hosted_files/kvmforum2019/3b/ibm_protected_vms_s390x.pdf v2 -> v3 - rebase against v5.6-rc2 - move some checks into the callers - typo fixes - extend UV query size - do a tlb flush when entering/exiting protected mode - more comments - change interface to PV_ENABLE/DISABLE instead of vcpu/vm create/destroy - lockdep checks for *is_protected calls - locking improments - move facility 161 to qemu - checkpatch fixes - merged error handling in mm patch - removed vcpu pv commands - use mp_state for setting the IPL PSW v1 -> v2 - rebase on top of kvm/master - pipe through rc and rrc. This might have created some churn here and there - turn off sclp masking when rebooting into "unsecure" - memory management simplification - prefix page handling now via intercept 112 - io interrupt intervention request fix (do not use GISA) - api.txt conversion to rst - sample patches on top of mm/gup/writeback - tons of review feedback - kvm_uv debug feature fixes and unifications - ultravisor information for /sys/firmware - RFCv2 -> v1 (you can diff the protvirtv2 and the protvirtv3 branch) - tons of review feedback integrated (see mail thread) - memory management now complete and working - Documentation patches merged - interrupt patches merged - CONFIG_KVM_S390_PROTECTED_VIRTUALIZATION_HOST removed - SIDA interface integrated into memop - for merged patches I removed reviews that were not in all patches Christian Borntraeger (5): KVM: s390/mm: Make pages accessible before destroying the guest KVM: s390: protvirt: Add SCLP interrupt handling KVM: s390: protvirt: do not inject interrupts after start KVM: s390: rstify new ioctls in api.rst KVM: s390: protvirt: introduce and enable KVM_CAP_S390_PROTECTED Claudio Imbrenda (3): mm:gup/writeback: add callbacks for inaccessible pages s390/mm: provide memory management functions for protected KVM guests KVM: s390/mm: handle guest unpin events Janosch Frank (24): KVM: s390: protvirt: Add UV debug trace KVM: s390: add new variants of UV CALL KVM: s390: protvirt: Add initial vm and cpu lifecycle handling KVM: s390: protvirt: Add KVM api documentation KVM: s390: protvirt: Secure memory is not mergeable KVM: s390: protvirt: Handle SE notification interceptions KVM: s390: protvirt: Instruction emulation KVM: s390: protvirt: Handle spec exception loops KVM: s390: protvirt: Add new gprs location handling KVM: S390: protvirt: Introduce instruction data area bounce buffer KVM: s390: protvirt: handle secure guest prefix pages KVM: s390: protvirt: Write sthyi data to instruction data area KVM: s390: protvirt: STSI handling KVM: s390: protvirt: disallow one_reg KVM: s390: protvirt: Do only reset registers that are accessible KVM: s390: protvirt: Only sync fmt4 registers KVM: s390: protvirt: Add program exception injection KVM: s390: protvirt: UV calls in support of diag308 0, 1 KVM: s390: protvirt: Report CPU state to Ultravisor KVM: s390: protvirt: Support cmd 5 operation state KVM: s390: protvirt: Mask PSW interrupt bits for interception 104 and 112 KVM: s390: protvirt: Add UV cpu reset calls DOCUMENTATION: Protected virtual machine introduction and IPL s390: protvirt: Add sysfs firmware interface for Ultravisor information Michael Mueller (1): KVM: s390: protvirt: Implement interrupt injection Ulrich Weigand (1): KVM: s390/interrupt: do not pin adapter interrupt pages Vasily Gorbik (3): s390/protvirt: introduce host side setup s390/protvirt: add ultravisor initialization s390/mm: add (non)secure page access exceptions handlers .../admin-guide/kernel-parameters.txt | 5 + Documentation/virt/kvm/api.rst | 91 +++- Documentation/virt/kvm/devices/s390_flic.rst | 11 +- Documentation/virt/kvm/index.rst | 2 + Documentation/virt/kvm/s390-pv-boot.rst | 83 +++ Documentation/virt/kvm/s390-pv.rst | 116 ++++ MAINTAINERS | 1 + arch/s390/boot/Makefile | 2 +- arch/s390/boot/uv.c | 21 +- arch/s390/include/asm/gmap.h | 6 + arch/s390/include/asm/kvm_host.h | 113 +++- arch/s390/include/asm/mmu.h | 2 + arch/s390/include/asm/mmu_context.h | 1 + arch/s390/include/asm/page.h | 5 + arch/s390/include/asm/pgtable.h | 35 +- arch/s390/include/asm/uv.h | 252 ++++++++- arch/s390/kernel/Makefile | 1 + arch/s390/kernel/pgm_check.S | 4 +- arch/s390/kernel/setup.c | 9 +- arch/s390/kernel/uv.c | 413 ++++++++++++++ arch/s390/kvm/Makefile | 2 +- arch/s390/kvm/diag.c | 4 + arch/s390/kvm/intercept.c | 115 +++- arch/s390/kvm/interrupt.c | 399 ++++++++------ arch/s390/kvm/kvm-s390.c | 509 +++++++++++++++--- arch/s390/kvm/kvm-s390.h | 51 +- arch/s390/kvm/priv.c | 11 +- arch/s390/kvm/pv.c | 286 ++++++++++ arch/s390/mm/fault.c | 78 +++ arch/s390/mm/gmap.c | 65 ++- include/linux/gfp.h | 6 + include/uapi/linux/kvm.h | 43 +- mm/gup.c | 15 +- mm/page-writeback.c | 5 + 34 files changed, 2442 insertions(+), 320 deletions(-) create mode 100644 Documentation/virt/kvm/s390-pv-boot.rst create mode 100644 Documentation/virt/kvm/s390-pv.rst create mode 100644 arch/s390/kernel/uv.c create mode 100644 arch/s390/kvm/pv.c -- 2.25.0
