From: Alastair D'Silva <alastair@xxxxxxxxxxx>
This patch reads timeouts & firmware version from the controller, and
uses those timeouts to wait for the controller to report that it is ready
before handing the memory over to libnvdimm.
Signed-off-by: Alastair D'Silva <alastair@xxxxxxxxxxx>
---
drivers/nvdimm/ocxl/Makefile | 2 +-
drivers/nvdimm/ocxl/scm.c | 84 ++++++++++++++++++++++++++++++
drivers/nvdimm/ocxl/scm_internal.c | 19 +++++++
drivers/nvdimm/ocxl/scm_internal.h | 24 +++++++++
4 files changed, 128 insertions(+), 1 deletion(-)
create mode 100644 drivers/nvdimm/ocxl/scm_internal.c
diff --git a/drivers/nvdimm/ocxl/Makefile b/drivers/nvdimm/ocxl/Makefile
index 74a1bd98848e..9b6e31f0eb3e 100644
--- a/drivers/nvdimm/ocxl/Makefile
+++ b/drivers/nvdimm/ocxl/Makefile
@@ -4,4 +4,4 @@ ccflags-$(CONFIG_PPC_WERROR) += -Werror
obj-$(CONFIG_OCXL_SCM) += ocxlscm.o
-ocxlscm-y := scm.o
+ocxlscm-y := scm.o scm_internal.o
diff --git a/drivers/nvdimm/ocxl/scm.c b/drivers/nvdimm/ocxl/scm.c
index 571058a9e7b8..8088f65c289e 100644
--- a/drivers/nvdimm/ocxl/scm.c
+++ b/drivers/nvdimm/ocxl/scm.c
@@ -7,6 +7,7 @@
#include <linux/module.h>
#include <misc/ocxl.h>
+#include <linux/delay.h>
#include <linux/ndctl.h>
#include <linux/mm_types.h>
#include <linux/memory_hotplug.h>
@@ -266,6 +267,30 @@ static int scm_register_lpc_mem(struct scm_data *scm_data)
return 0;
}
+/**
+ * scm_is_usable() - Is a controller usable?
+ * @scm_data: a pointer to the SCM device data
+ * Return: true if the controller is usable
+ */
+static bool scm_is_usable(const struct scm_data *scm_data)
+{
+ u64 chi = 0;
+ int rc = scm_chi(scm_data, &chi);
+
+ if (!(chi & GLOBAL_MMIO_CHI_CRDY)) {
+ dev_err(&scm_data->dev, "SCM controller is not ready.\n");
+ return false;
+ }
+
+ if (!(chi & GLOBAL_MMIO_CHI_MA)) {
+ dev_err(&scm_data->dev,
+ "SCM controller does not have memory available.\n");
+ return false;
+ }
+
+ return true;
+}
+
/**
* allocate_scm_minor() - Allocate a minor number to use for an SCM device
* @scm_data: The SCM device to associate the minor with
@@ -380,6 +405,48 @@ static void scm_remove(struct pci_dev *pdev)
}
}
+/**
+ * read_device_metadata() - Retrieve config information from the AFU and save it for future use
+ * @scm_data: the SCM metadata
+ * Return: 0 on success, negative on failure
+ */
+static int read_device_metadata(struct scm_data *scm_data)
+{
+ u64 val;
+ int rc;
+
+ rc = ocxl_global_mmio_read64(scm_data->ocxl_afu, GLOBAL_MMIO_CCAP0,
+ OCXL_LITTLE_ENDIAN, &val);
+ if (rc)
+ return rc;
+
+ scm_data->scm_revision = val & 0xFFFF;
+ scm_data->read_latency = (val >> 32) & 0xFF;
+ scm_data->readiness_timeout = (val >> 48) & 0xff;
+ scm_data->memory_available_timeout = val >> 52;
+
+ rc = ocxl_global_mmio_read64(scm_data->ocxl_afu, GLOBAL_MMIO_CCAP1,
+ OCXL_LITTLE_ENDIAN, &val);
+ if (rc)
+ return rc;
+
+ scm_data->max_controller_dump_size = val & 0xFFFFFFFF;
+
+ // Extract firmware version text
+ rc = ocxl_global_mmio_read64(scm_data->ocxl_afu, GLOBAL_MMIO_FWVER,
+ OCXL_HOST_ENDIAN, (u64 *)scm_data->fw_version);
+ if (rc)
+ return rc;
+
+ scm_data->fw_version[8] = '\0';
+
+ dev_info(&scm_data->dev,
+ "Firmware version '%s' SCM revision %d:%d\n", scm_data->fw_version,
+ scm_data->scm_revision >> 4, scm_data->scm_revision & 0x0F);
+
+ return 0;
+}
+
/**
* scm_probe_function_0 - Set up function 0 for an OpenCAPI Storage Class Memory device
* This is important as it enables templates higher than 0 across all other functions,
@@ -420,6 +487,8 @@ static int scm_probe_function_0(struct pci_dev *pdev)
static int scm_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct scm_data *scm_data = NULL;
+ int elapsed;
+ u16 timeout;
if (PCI_FUNC(pdev->devfn) == 0)
return scm_probe_function_0(pdev);
@@ -469,6 +538,21 @@ static int scm_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err;
}
+ if (read_device_metadata(scm_data)) {
+ dev_err(&pdev->dev, "Could not read SCM device metadata\n");
+ goto err;
+ }
+
+ elapsed = 0;
+ timeout = scm_data->readiness_timeout + scm_data->memory_available_timeout;
+ while (!scm_is_usable(scm_data)) {
+ if (elapsed++ > timeout) {
+ dev_warn(&scm_data->dev, "SCM ready timeout.\n");
+ goto err;
+ }
+
+ msleep(1000);
+ }
if (scm_register_lpc_mem(scm_data)) {
dev_err(&pdev->dev, "Could not register OCXL SCM memory with libnvdimm\n");
goto err;
diff --git a/drivers/nvdimm/ocxl/scm_internal.c b/drivers/nvdimm/ocxl/scm_internal.c
new file mode 100644
index 000000000000..72d3c0e7d846
--- /dev/null
+++ b/drivers/nvdimm/ocxl/scm_internal.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 IBM Corp.
+
+#include <misc/ocxl.h>
+#include <linux/delay.h>
+#include "scm_internal.h"
+
+int scm_chi(const struct scm_data *scm_data, u64 *chi)
+{
+ u64 val;
+ int rc = ocxl_global_mmio_read64(scm_data->ocxl_afu, GLOBAL_MMIO_CHI,
+ OCXL_LITTLE_ENDIAN, &val);
+ if (rc)
+ return rc;
+
+ *chi = val;
+
+ return 0;
+}
diff --git a/drivers/nvdimm/ocxl/scm_internal.h b/drivers/nvdimm/ocxl/scm_internal.h
index d6ab361f5de9..584450f55e30 100644
--- a/drivers/nvdimm/ocxl/scm_internal.h
+++ b/drivers/nvdimm/ocxl/scm_internal.h
@@ -97,4 +97,28 @@ struct scm_data {
void *metadata_addr;
struct resource scm_res;
struct nd_region *nd_region;
+ char fw_version[8+1];
+
+ u32 max_controller_dump_size;
+ u16 scm_revision; // major/minor
+ u8 readiness_timeout; /* The worst case time (in seconds) that the host shall
+ * wait for the controller to become operational following a reset (CHI.CRDY).
+ */
+ u8 memory_available_timeout; /* The worst case time (in seconds) that the host shall
+ * wait for memory to become available following a reset (CHI.MA).
+ */
+
+ u16 read_latency; /* The nominal measure of latency (in nanoseconds)
+ * associated with an unassisted read of a memory block.
+ * This represents the capability of the raw media technology without assistance
+ */
};
+
+/**
+ * scm_chi() - Get the value of the CHI register
+ * @scm_data: The SCM metadata
+ * @chi: returns the CHI value
+ *
+ * Returns 0 on success, negative on error
+ */
+int scm_chi(const struct scm_data *scm_data, u64 *chi);
--
2.23.0
