Re: Bug 205201 - overflow of DMA mask and bus mask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/11/2019 16:28, Christoph Hellwig wrote:
On Tue, Nov 05, 2019 at 08:56:27AM +0100, Christian Zigotzky wrote:
Hi All,

We still have DMA problems with some PCI devices. Since the PowerPC updates
4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if we want to
work with our PCI devices. The FSL P5020 and P5040 have these problems
currently.

Error message:

[   25.654852] bttv 1000:04:05.0: overflow 0x00000000fe077000+4096 of DMA
mask ffffffff bus mask df000000

Hmm, that bus mask looks pretty wacky - are you able to figure out where that's coming from?

Robin.

All 5.x Linux kernels can't initialize a SCSI PCI card anymore so booting
of a Linux userland isn't possible.

PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. The kernel
4.20 works with all PCI devices without limitation of RAM.

Can you send me the .config and a dmesg?  And in the meantime try the
patch below?

---
 From 4d659b7311bd4141fdd3eeeb80fa2d7602ea01d4 Mon Sep 17 00:00:00 2001
From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Date: Fri, 18 Oct 2019 13:00:43 +0200
Subject: dma-direct: check for overflows on 32 bit DMA addresses

As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation it is
possible for a device configured with 32 bit DMA addresses and a partial
DMA mapping located at the end of the address space to overflow. It
happens when a higher physical address, not DMAable, is translated to
it's DMA counterpart.

For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
an interconnect capable of addressing the lower 1 GB of physical memory
with a DMA offset of 0xc0000000. It transpires that, any attempt to
translate physical addresses higher than the first GB will result in an
overflow which dma_capable() can't detect as it only checks for
addresses bigger then the maximum allowed DMA address.

Fix this by verifying in dma_capable() if the DMA address range provided
is at any point lower than the minimum possible DMA address on the bus.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
---
  include/linux/dma-direct.h | 8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index adf993a3bd58..6ad9e9ea7564 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -3,6 +3,7 @@
  #define _LINUX_DMA_DIRECT_H 1
#include <linux/dma-mapping.h>
+#include <linux/memblock.h> /* for min_low_pfn */
  #include <linux/mem_encrypt.h>
#ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
@@ -27,6 +28,13 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
  	if (!dev->dma_mask)
  		return false;
+#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
+	/* Check if DMA address overflowed */
+	if (min(addr, addr + size - 1) <
+		__phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
+		return false;
+#endif
+
  	return addr + size - 1 <=
  		min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
  }






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux