On Wed, Sep 11, 2019 at 12:54:38PM +0200, Nicolas Saenz Julienne wrote:
> On Mon, 2019-09-09 at 11:58 +0200, Nicolas Saenz Julienne wrote:
> > /*
> > - * Return the maximum physical address for ZONE_DMA32 (DMA_BIT_MASK(32)). It
> > - * currently assumes that for memory starting above 4G, 32-bit devices will
> > - * use a DMA offset.
> > + * Return the maximum physical address for a zone with a given address size
> > + * limit. It currently assumes that for memory starting above 4G, 32-bit
> > + * devices will use a DMA offset.
> > */
> > -static phys_addr_t __init max_zone_dma32_phys(void)
> > +static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
> > {
> > phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32);
> > - return min(offset + (1ULL << 32), memblock_end_of_DRAM());
> > + return min(offset + (1ULL << zone_bits), memblock_end_of_DRAM());
> > }
>
> while testing other code on top of this series on odd arm64 machines I found an
> issue: when memblock_start_of_DRAM() != 0, max_zone_phys() isn't taking into
> account the offset to the beginning of memory. This doesn't matter with
> zone_bits == 32 but it does when zone_bits == 30.
I thought about this but I confused myself and the only case I had in
mind was an AMD Seattle system with RAM starting at 4GB.
What we need from this function is that the lowest naturally aligned
2^30 RAM is covered by ZONE_DMA while the rest to 2^32 are ZONE_DMA32.
This assumed that devices only capable of 30-bit (or 32-bit), have the
top address bits hardwired to be able access the bottom of the memory
(and this would be expressed in DT as the DMA offset).
I guess the fix here is to use GENMASK_ULL(63, zone_bits).
--
Catalin
