[PATCH v8 01/27] Documentation/x86: Add CET description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Explain how CET works and the no_cet_shstk/no_cet_ibt kernel
parameters.

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>
---
 .../admin-guide/kernel-parameters.txt         |   6 +
 Documentation/x86/index.rst                   |   1 +
 Documentation/x86/intel_cet.rst               | 269 ++++++++++++++++++
 3 files changed, 276 insertions(+)
 create mode 100644 Documentation/x86/intel_cet.rst

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 47d981a86e2f..31ba7b408407 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2935,6 +2935,12 @@
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
 
+	no_cet_ibt	[X86-64] Disable indirect branch tracking for user-mode
+			applications
+
+	no_cet_shstk	[X86-64] Disable shadow stack support for user-mode
+			applications
+
 	nosmap		[X86,PPC]
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst
index af64c4bb4447..4be2d34ee631 100644
--- a/Documentation/x86/index.rst
+++ b/Documentation/x86/index.rst
@@ -19,6 +19,7 @@ x86-specific Documentation
    tlb
    mtrr
    pat
+   intel_cet
    intel_mpx
    intel-iommu
    intel_txt
diff --git a/Documentation/x86/intel_cet.rst b/Documentation/x86/intel_cet.rst
new file mode 100644
index 000000000000..a6a34a92987e
--- /dev/null
+++ b/Documentation/x86/intel_cet.rst
@@ -0,0 +1,269 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Control-flow Enforcement Technology (CET)
+=========================================
+
+[1] Overview
+============
+
+Control-flow Enforcement Technology (CET) provides protection against
+return/jump-oriented programming (ROP) attacks.  It can be setup to
+protect both the kernel and applications.  In the first phase,
+only the user-mode protection is implemented in 64-bit mode; 32-bit
+applications are supported in compatibility mode.
+
+CET introduces shadow stack (SHSTK) and indirect branch tracking
+(IBT).  SHSTK is a secondary stack allocated from memory and cannot
+be directly modified by applications.  When executing a CALL, the
+processor pushes a copy of the return address to SHSTK.  Upon
+function return, the processor pops the SHSTK copy and compares it
+to the one from the program stack.  If the two copies differ, the
+processor raises a control-protection exception.  IBT verifies all
+indirect CALL/JMP targets are intended as marked by the compiler
+with 'ENDBR' opcodes (see CET instructions below).
+
+There are two kernel configuration options:
+
+    INTEL_X86_SHADOW_STACK_USER, and
+    INTEL_X86_BRANCH_TRACKING_USER.
+
+To build a CET-enabled kernel, Binutils v2.31 and GCC v8.1 or later
+are required.  To build a CET-enabled application, GLIBC v2.28 or
+later is also required.
+
+There are two command-line options for disabling CET features:
+
+    no_cet_shstk - disables SHSTK, and
+    no_cet_ibt - disables IBT.
+
+At run time, /proc/cpuinfo shows the availability of SHSTK and IBT.
+
+[2] CET assembly instructions
+=============================
+
+RDSSP %r
+    Read the SHSTK pointer into %r.
+
+INCSSP %r
+    Unwind (increment) the SHSTK pointer (0 ~ 255) steps as indicated
+    in the operand register.  The GLIBC longjmp uses INCSSP to unwind
+    the SHSTK until that matches the program stack.  When it is
+    necessary to unwind beyond 255 steps, longjmp divides and repeats
+    the process.
+
+RSTORSSP (%r)
+    Switch to the SHSTK indicated in the 'restore token' pointed by
+    the operand register and replace the 'restore token' with a new
+    token to be saved (with SAVEPREVSSP) for the outgoing SHSTK.
+
+::
+
+                               Before RSTORSSP
+
+             Incoming SHSTK                   Current/Outgoing SHSTK
+
+        |----------------------|             |----------------------|
+ addr=x |                      |       ssp-> |                      |
+        |----------------------|             |----------------------|
+ (%r)-> | rstor_token=(x|Lg)   |    addr=y-8 |                      |
+        |----------------------|             |----------------------|
+
+                               After RSTORSSP
+
+        |----------------------|             |----------------------|
+        |                      |             |                      |
+        |----------------------|             |----------------------|
+  ssp-> | rstor_token=(y|Bz|Lg)|    addr=y-8 |                      |
+        |----------------------|             |----------------------|
+
+    note:
+        1. Only valid addresses and restore tokens can be on the
+           user-mode SHSTK.
+        2. A token is always of type u64 and must align to u64.
+        3. The incoming SHSTK pointer in a rstor_token must point to
+           immediately above the token.
+        4. 'Lg' is bit[0] of a rstor_token indicating a 64-bit SHSTK.
+        5. 'Bz' is bit[1] of a rstor_token indicating the token is to
+           be used only for the next SAVEPREVSSP and invalid for the
+           RSTORSSP.
+
+SAVEPREVSSP
+    Store the SHSTK 'restore token' pointed by
+        (current_SHSTK_pointer + 8).
+
+::
+
+                             After SAVEPREVSSP
+
+        |----------------------|             |----------------------|
+  ssp-> |                      |             |                      |
+        |----------------------|             |----------------------|
+        | rstor_token=(y|Bz|Lg)|    addr=y-8 | rstor_token(y|Lg)    |
+        |----------------------|             |----------------------|
+
+WRUSS %r0, (%r1)
+    Write the value in %r0 to the SHSTK address pointed by (%r1).
+    This is a kernel-mode only instruction.
+
+ENDBR
+    The compiler inserts an ENDBR at all valid branch targets.  Any
+    CALL/JMP to a target without an ENDBR triggers a control
+    protection fault.
+
+[3] Application Enabling
+========================
+
+An application's CET capability is marked in its ELF header and can
+be verified from the following command output, in the
+NT_GNU_PROPERTY_TYPE_0 field:
+
+    readelf -n <application>
+
+If an application supports CET and is statically linked, it will run
+with CET protection.  If the application needs any shared libraries,
+the loader checks all dependencies and enables CET only when all
+requirements are met.
+
+[4] Legacy Libraries
+====================
+
+GLIBC provides a few tunables for backward compatibility.
+
+GLIBC_TUNABLES=glibc.tune.hwcaps=-SHSTK,-IBT
+    Turn off SHSTK/IBT for the current shell.
+
+GLIBC_TUNABLES=glibc.tune.x86_shstk=<on, permissive>
+    This controls how dlopen() handles SHSTK legacy libraries:
+        on: continue with SHSTK enabled;
+        permissive: continue with SHSTK off.
+
+[5] CET system calls
+====================
+
+The following arch_prctl() system calls are added for CET:
+
+arch_prctl(ARCH_X86_CET_STATUS, unsigned long *addr)
+    Return CET feature status.
+
+    The parameter 'addr' is a pointer to a user buffer.
+    On returning to the caller, the kernel fills the following
+    information:
+
+    *addr = SHSTK/IBT status
+    *(addr + 1) = SHSTK base address
+    *(addr + 2) = SHSTK size
+
+arch_prctl(ARCH_X86_CET_DISABLE, unsigned long features)
+    Disable SHSTK and/or IBT specified in 'features'.  Return -EPERM
+    if CET is locked.
+
+arch_prctl(ARCH_X86_CET_LOCK)
+    Lock in CET feature.
+
+arch_prctl(ARCH_X86_CET_ALLOC_SHSTK, unsigned long *addr)
+    Allocate a new SHSTK and put a restore token at top.
+
+    The parameter 'addr' is a pointer to a user buffer and indicates
+    the desired SHSTK size to allocate.  On returning to the caller,
+    the kernel fills *addr with the base address of the new SHSTK.
+
+arch_prctl(ARCH_X86_CET_MARK_LEGACY_CODE, unsigned long *addr)
+    Mark an address range as IBT legacy code.
+
+    The parameter 'addr' is a pointer to a user buffer that has the
+    following information:
+
+    *addr = starting linear address of the legacy code
+    *(addr + 1) = size of the legacy code
+    *(addr + 2): set (1); clear (0)
+
+Note:
+  There is no CET enabling arch_prctl function.  By design, CET is
+  enabled automatically if the binary and the system can support it.
+
+  The parameters passed are always unsigned 64-bit.  When an ia32
+  application passing pointers, it should only use the lower 32 bits.
+
+[6] The implementation of the SHSTK
+===================================
+
+SHSTK size
+----------
+
+A task's SHSTK is allocated from memory to a fixed size of
+RLIMIT_STACK.  A compat-mode thread's SHSTK size is 1/4 of
+RLIMIT_STACK.  The smaller 32-bit thread SHSTK allows more threads to
+share a 32-bit address space.
+
+Signal
+------
+
+The main program and its signal handlers use the same SHSTK.  Because
+the SHSTK stores only return addresses, a large SHSTK will cover the
+condition that both the program stack and the sigaltstack run out.
+
+The kernel creates a restore token at the SHSTK restoring address and
+verifies that token when restoring from the signal handler.
+
+Fork
+----
+
+The SHSTK's vma has VM_SHSTK flag set; its PTEs are required to be
+read-only and dirty.  When a SHSTK PTE is not present, RO, and dirty,
+a SHSTK access triggers a page fault with an additional SHSTK bit set
+in the page fault error code.
+
+When a task forks a child, its SHSTK PTEs are copied and both the
+parent's and the child's SHSTK PTEs are cleared of the dirty bit.
+Upon the next SHSTK access, the resulting SHSTK page fault is handled
+by page copy/re-use.
+
+When a pthread child is created, the kernel allocates a new SHSTK for
+the new thread.
+
+Setjmp/Longjmp
+--------------
+
+Longjmp unwinds SHSTK until it matches the program stack.
+
+Ucontext
+--------
+
+In GLIBC, getcontext/setcontext is implemented in similar way as
+setjmp/longjmp.
+
+When makecontext creates a new ucontext, a new SHSTK is allocated for
+that context with ARCH_X86_CET_ALLOC_SHSTK the syscall.  The kernel
+creates a restore token at the top of the new SHSTK and the user-mode
+code switches to the new SHSTK with the RSTORSSP instruction.
+
+[7] The management of read-only & dirty PTEs for SHSTK
+======================================================
+
+A RO and dirty PTE exists in the following cases:
+
+(a) A page is modified and then shared with a fork()'ed child;
+(b) A R/O page that has been COW'ed;
+(c) A SHSTK page.
+
+The processor only checks the dirty bit for (c).  To prevent the use
+of non-SHSTK memory as SHSTK, we use a spare bit of the 64-bit PTE as
+DIRTY_SW for (a) and (b) above.  This results to the following PTE
+settings:
+
+Modified PTE:             (R/W + DIRTY_HW)
+Modified and shared PTE:  (R/O + DIRTY_SW)
+R/O PTE, COW'ed:          (R/O + DIRTY_SW)
+SHSTK PTE:                (R/O + DIRTY_HW)
+SHSTK PTE, COW'ed:        (R/O + DIRTY_HW)
+SHSTK PTE, shared:        (R/O + DIRTY_SW)
+
+Note that DIRTY_SW is only used in R/O PTEs but not R/W PTEs.
+
+[8] The implementation of IBT
+=============================
+
+The kernel provides IBT support in mmap() of the legacy code bit map.
+However, the management of the bitmap is done in the GLIBC or the
+application.
-- 
2.17.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux