Re: RFC: call_rcu_outstanding (was Re: WARNING in __mmdrop)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jul 21, 2019 at 08:28:05AM -0400, Michael S. Tsirkin wrote:
> Hi Paul, others,
> 
> So it seems that vhost needs to call kfree_rcu from an ioctl. My worry
> is what happens if userspace starts cycling through lots of these
> ioctls.  Given we actually use rcu as an optimization, we could just
> disable the optimization temporarily - but the question would be how to
> detect an excessive rate without working too hard :) .
> 
> I guess we could define as excessive any rate where callback is
> outstanding at the time when new structure is allocated.  I have very
> little understanding of rcu internals - so I wanted to check that the
> following more or less implements this heuristic before I spend time
> actually testing it.
> 
> Could others pls take a look and let me know?

These look good as a way of seeing if there are any outstanding callbacks,
but in the case of Tree RCU, call_rcu_outstanding() would almost never
return false on a busy system.

Here are some alternatives:

o	RCU uses some pieces of Rao Shoaib kfree_rcu() patches.
	The idea is to make kfree_rcu() locally buffer requests into
	batches of (say) 1,000, but processing smaller batches when RCU
	is idle, or when some smallish amout of time has passed with
	no more kfree_rcu() request from that CPU.  RCU than takes in
	the batch using not call_rcu(), but rather queue_rcu_work().
	The resulting batch of kfree() calls would therefore execute in
	workqueue context rather than in softirq context, which should
	be much easier on the system.

	In theory, this would allow people to use kfree_rcu() without
	worrying quite so much about overload.  It would also not be
	that hard to implement.

o	Subsystems vulnerable to user-induced kfree_rcu() flooding use
	call_rcu() instead of kfree_rcu().  Keep a count of the number
	of things waiting for a grace period, and when this gets too
	large, disable the optimization.  It will then drain down, at
	which point the optimization can be re-enabled.

	But please note that callbacks are -not- guaranteed to run on
	the CPU that queued them.  So yes, you would need a per-CPU
	counter, but you would need to periodically sum it up to check
	against the global state.  Or keep track of the CPU that
	did the call_rcu() so that you can atomically decrement in
	the callback the same counter that was atomically incremented
	just before the call_rcu().  Or any number of other approaches.

Also, the overhead is important.  For example, as far as I know,
current RCU gracefully handles close(open(...)) in a tight userspace
loop.  But there might be trouble due to tight userspace loops around
lighter-weight operations.

So an important question is "Just how fast is your ioctl?"  If it takes
(say) 100 microseconds to execute, there should be absolutely no problem.
On the other hand, if it can execute in 50 nanoseconds, this very likely
does need serious attention.

Other thoughts?

							Thanx, Paul

> Thanks!
> 
> Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
> 
> 
> diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c
> index 477b4eb44af5..067909521d72 100644
> --- a/kernel/rcu/tiny.c
> +++ b/kernel/rcu/tiny.c
> @@ -125,6 +125,25 @@ void synchronize_rcu(void)
>  }
>  EXPORT_SYMBOL_GPL(synchronize_rcu);
> 
> +/*
> + * Helpful for rate-limiting kfree_rcu/call_rcu callbacks.
> + */
> +bool call_rcu_outstanding(void)
> +{
> +	unsigned long flags;
> +	struct rcu_data *rdp;
> +	bool outstanding;
> +
> +	local_irq_save(flags);
> +	rdp = this_cpu_ptr(&rcu_data);
> +	outstanding = rcu_segcblist_empty(&rdp->cblist);
> +	outstanding = rcu_ctrlblk.donetail != rcu_ctrlblk.curtail;
> +	local_irq_restore(flags);
> +
> +	return outstanding;
> +}
> +EXPORT_SYMBOL_GPL(call_rcu_outstanding);
> +
>  /*
>   * Post an RCU callback to be invoked after the end of an RCU grace
>   * period.  But since we have but one CPU, that would be after any
> diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> index a14e5fbbea46..d4b9d61e637d 100644
> --- a/kernel/rcu/tree.c
> +++ b/kernel/rcu/tree.c
> @@ -2482,6 +2482,24 @@ static void rcu_leak_callback(struct rcu_head *rhp)
>  {
>  }
> 
> +/*
> + * Helpful for rate-limiting kfree_rcu/call_rcu callbacks.
> + */
> +bool call_rcu_outstanding(void)
> +{
> +	unsigned long flags;
> +	struct rcu_data *rdp;
> +	bool outstanding;
> +
> +	local_irq_save(flags);
> +	rdp = this_cpu_ptr(&rcu_data);
> +	outstanding = rcu_segcblist_empty(&rdp->cblist);
> +	local_irq_restore(flags);
> +
> +	return outstanding;
> +}
> +EXPORT_SYMBOL_GPL(call_rcu_outstanding);
> +
>  /*
>   * Helper function for call_rcu() and friends.  The cpu argument will
>   * normally be -1, indicating "currently running CPU".  It may specify




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux