Re: [PATCH v3 0/6] mm: Further memory block device cleanups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2019-06-20 at 20:31 +0200, David Hildenbrand wrote:
> @Andrew: Only patch 1, 4 and 6 changed compared to v1.
> 
> Some further cleanups around memory block devices. Especially, clean up
> and simplify walk_memory_range(). Including some other minor cleanups.
> 
> Compiled + tested on x86 with DIMMs under QEMU. Compile-tested on ppc64.
> 
> v2 -> v3:
> - "mm/memory_hotplug: Rename walk_memory_range() and pass start+size .."
> -- Avoid warning on ppc.
> - "drivers/base/memory.c: Get rid of find_memory_block_hinted()"
> -- Fixup a comment regarding hinted devices.
> 
> v1 -> v2:
> - "mm: Section numbers use the type "unsigned long""
> -- "unsigned long i" -> "unsigned long nr", in one case -> "int i"
> - "drivers/base/memory.c: Get rid of find_memory_block_hinted("
> -- Fix compilation error
> -- Get rid of the "hint" parameter completely
> 
> David Hildenbrand (6):
>   mm: Section numbers use the type "unsigned long"
>   drivers/base/memory: Use "unsigned long" for block ids
>   mm: Make register_mem_sect_under_node() static
>   mm/memory_hotplug: Rename walk_memory_range() and pass start+size
>     instead of pfns
>   mm/memory_hotplug: Move and simplify walk_memory_blocks()
>   drivers/base/memory.c: Get rid of find_memory_block_hinted()
> 
>  arch/powerpc/platforms/powernv/memtrace.c |  23 ++---
>  drivers/acpi/acpi_memhotplug.c            |  19 +---
>  drivers/base/memory.c                     | 120 +++++++++++++---------
>  drivers/base/node.c                       |   8 +-
>  include/linux/memory.h                    |   5 +-
>  include/linux/memory_hotplug.h            |   2 -
>  include/linux/mmzone.h                    |   4 +-
>  include/linux/node.h                      |   7 --
>  mm/memory_hotplug.c                       |  57 +---------
>  mm/sparse.c                               |  12 +--
>  10 files changed, 106 insertions(+), 151 deletions(-)
> 

This series causes a few machines are unable to boot triggering endless soft
lockups. Reverted those commits fixed the issue.

97f4217d1da0 Revert "mm/memory_hotplug: rename walk_memory_range() and pass
start+size instead of pfns"
c608eebf33c6 Revert "mm-memory_hotplug-rename-walk_memory_range-and-pass-
startsize-instead-of-pfns-fix"
34b5e4ab7558 Revert "mm/memory_hotplug: move and simplify walk_memory_blocks()"
59a9f3eec5d1 Revert "drivers/base/memory.c: Get rid of
find_memory_block_hinted()"
5cfcd52288b6 Revert "drivers-base-memoryc-get-rid-of-find_memory_block_hinted-
v3"

[    4.582081][    T1] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[    4.590405][    T1] ACPI: bus type PCI registered
[    4.592908][    T1] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0x80000000-0x8fffffff] (base 0x80000000)
[    4.601860][    T1] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in
E820
[    4.601860][    T1] PCI: Using configuration type 1 for base access
[   28.661336][   C16] watchdog: BUG: soft lockup - CPU#16 stuck for 22s!
[swapper/0:1]
[   28.671351][   C16] Modules linked in:
[   28.671354][   C16] CPU: 16 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5-
next-20190621+ #1
[   28.681366][   C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
Gen10, BIOS A40 03/09/2018
[   28.691334][   C16] RIP: 0010:_raw_spin_unlock_irqrestore+0x2f/0x40
[   28.701334][   C16] Code: 55 48 89 e5 41 54 49 89 f4 be 01 00 00 00 53 48 8b
55 08 48 89 fb 48 8d 7f 18 e8 4c 89 7d ff 48 89 df e8 94 f9 7d ff 41 54 9d <65>
ff 0d c2 44 8d 48 5b 41 5c 5d c3 0f 1f 44 00 00 0f 1f 44 00 00
[   28.711354][   C16] RSP: 0018:ffff888205b27bf8 EFLAGS: 00000246 ORIG_RAX:
ffffffffffffff13
[   28.721372][   C16] RAX: 0000000000000000 RBX: ffff8882053d6138 RCX:
ffffffffb6f2a3b8
[   28.731371][   C16] RDX: 1ffff11040a7ac27 RSI: dffffc0000000000 RDI:
ffff8882053d6138
[   28.741371][   C16] RBP: ffff888205b27c08 R08: ffffed1040a7ac28 R09:
ffffed1040a7ac27
[   28.751334][   C16] R10: ffffed1040a7ac27 R11: ffff8882053d613b R12:
0000000000000246
[   28.751370][   C16] R13: ffff888205b27c98 R14: ffff8884504d0a20 R15:
0000000000000000
[   28.761368][   C16] FS:  0000000000000000(0000) GS:ffff888454500000(0000)
knlGS:0000000000000000
[   28.771373][   C16] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   28.781334][   C16] CR2: 0000000000000000 CR3: 00000007c9012000 CR4:
00000000001406a0
[   28.791333][   C16] Call Trace:
[   28.791374][   C16]  klist_next+0xd8/0x1c0
[   28.791374][   C16]  subsys_find_device_by_id+0x13b/0x1f0
[   28.801334][   C16]  ? bus_find_device_by_name+0x20/0x20
[   28.801370][   C16]  ? kobject_put+0x23/0x250
[   28.811333][   C16]  walk_memory_blocks+0x6c/0xb8
[   28.811353][   C16]  ? write_policy_show+0x40/0x40
[   28.821334][   C16]  link_mem_sections+0x7e/0xa0
[   28.821369][   C16]  ? unregister_memory_block_under_nodes+0x210/0x210
[   28.831353][   C16]  ? __register_one_node+0x3bd/0x600
[   28.831353][   C16]  topology_init+0xbf/0x126
[   28.841364][   C16]  ? enable_cpu0_hotplug+0x1a/0x1a
[   28.841368][   C16]  do_one_initcall+0xfe/0x45a
[   28.851334][   C16]  ? initcall_blacklisted+0x150/0x150
[   28.851353][   C16]  ? kasan_check_write+0x14/0x20
[   28.861333][   C16]  ? up_write+0x75/0x140
[   28.861369][   C16]  kernel_init_freeable+0x619/0x6ac
[   28.871333][   C16]  ? rest_init+0x188/0x188
[   28.871353][   C16]  kernel_init+0x11/0x138
[   28.881363][   C16]  ? rest_init+0x188/0x188
[   28.881363][   C16]  ret_from_fork+0x22/0x40
[   56.661336][   C16] watchdog: BUG: soft lockup - CPU#16 stuck for 22s!
[swapper/0:1]
[   56.671352][   C16] Modules linked in:
[   56.671354][   C16] CPU: 16 PID: 1 Comm: swapper/0 Tainted:
G             L    5.2.0-rc5-next-20190621+ #1
[   56.681357][   C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
Gen10, BIOS A40 03/09/2018
[   56.691356][   C16] RIP: 0010:subsys_find_device_by_id+0x168/0x1f0
[   56.701334][   C16] Code: 48 85 c0 74 3e 48 8d 78 58 e8 14 77 ca ff 4d 8b 7e
58 4d 85 ff 74 2c 49 8d bf a0 03 00 00 e8 bf 75 ca ff 45 39 a7 a0 03 00 00 <75>
c9 4c 89 ff e8 0e 89 ff ff 48 85 c0 74 bc 48 89 df e8 21 3b 24
[   56.721333][   C16] RSP: 0018:ffff888205b27c68 EFLAGS: 00000287 ORIG_RAX:
ffffffffffffff13
[   56.721370][   C16] RAX: 0000000000000000 RBX: ffff888205b27c90 RCX:
ffffffffb74c9dc1
[   56.731370][   C16] RDX: 0000000000000003 RSI: dffffc0000000000 RDI:
ffff8888774ec3e0
[   56.741371][   C16] RBP: ffff888205b27cf8 R08: ffffed1040a7ac28 R09:
ffffed1040a7ac27
[   56.751335][   C16] R10: ffffed1040a7ac27 R11: ffff8882053d613b R12:
0000000000085c1b
[   56.761334][   C16] R13: 1ffff11040b64f8e R14: ffff888450de4a20 R15:
ffff8888774ec040
[   56.761372][   C16] FS:  0000000000000000(0000) GS:ffff888454500000(0000)
knlGS:0000000000000000
[   56.771374][   C16] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   56.781370][   C16] CR2: 0000000000000000 CR3: 00000007c9012000 CR4:
00000000001406a0
[   56.791373][   C16] Call Trace:
[   56.791373][   C16]  ? bus_find_device_by_name+0x20/0x20
[   56.801334][   C16]  ? kobject_put+0x23/0x250
[   56.801334][   C16]  walk_memory_blocks+0x6c/0xb8
[   56.811333][   C16]  ? write_policy_show+0x40/0x40
[   56.811353][   C16]  link_mem_sections+0x7e/0xa0
[   56.811353][   C16]  ? unregister_memory_block_under_nodes+0x210/0x210
[   56.821333][   C16]  ? __register_one_node+0x3bd/0x600
[   56.831333][   C16]  topology_init+0xbf/0x126
[   56.831355][   C16]  ? enable_cpu0_hotplug+0x1a/0x1a
[   56.841334][   C16]  do_one_initcall+0xfe/0x45a
[   56.841334][   C16]  ? initcall_blacklisted+0x150/0x150
[   56.851333][   C16]  ? kasan_check_write+0x14/0x20
[   56.851354][   C16]  ? up_write+0x75/0x140
[   56.861333][   C16]  kernel_init_freeable+0x619/0x6ac
[   56.861333][   C16]  ? rest_init+0x188/0x188
[   56.861369][   C16]  kernel_init+0x11/0x138
[   56.871333][   C16]  ? rest_init+0x188/0x188
[   56.871354][   C16]  ret_from_fork+0x22/0x40
[   64.601362][   C16] rcu: INFO: rcu_sched self-detected stall on CPU
[   64.611335][   C16] rcu: 	16-....: (5958 ticks this GP)
idle=37e/1/0x4000000000000002 softirq=27/27 fqs=3000 
[   64.621334][   C16] 	(t=6002 jiffies g=-1079 q=25)
[   64.621334][   C16] NMI backtrace for cpu 16
[   64.621374][   C16] CPU: 16 PID: 1 Comm: swapper/0 Tainted:
G             L    5.2.0-rc5-next-20190621+ #1
[   64.631372][   C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
Gen10, BIOS A40 03/09/2018
[   64.641371][   C16] Call Trace:
[   64.651337][   C16]  <IRQ>
[   64.651376][   C16]  dump_stack+0x62/0x9a
[   64.651376][   C16]  nmi_cpu_backtrace.cold.0+0x2e/0x33
[   64.661337][   C16]  ? nmi_cpu_backtrace_handler+0x20/0x20
[   64.661337][   C16]  nmi_trigger_cpumask_backtrace+0x1a6/0x1b9
[   64.671353][   C16]  arch_trigger_cpumask_backtrace+0x19/0x20
[   64.681366][   C16]  rcu_dump_cpu_stacks+0x18b/0x1d6
[   64.681366][   C16]  rcu_sched_clock_irq.cold.64+0x368/0x791
[   64.691336][   C16]  ? kasan_check_read+0x11/0x20
[   64.691354][   C16]  ? __raise_softirq_irqoff+0x66/0x150
[   64.701336][   C16]  update_process_times+0x2f/0x60
[   64.701362][   C16]  tick_periodic+0x38/0xe0
[   64.711334][   C16]  tick_handle_periodic+0x2e/0x80
[   64.711353][   C16]  smp_apic_timer_interrupt+0xfb/0x370
[   64.721367][   C16]  apic_timer_interrupt+0xf/0x20
[   64.721367][   C16]  </IRQ>
[   64.721367][   C16] RIP: 0010:_raw_spin_unlock_irqrestore+0x2f/0x40
[   64.731370][   C16] Code: 55 48 89 e5 41 54 49 89 f4 be 01 00 00 00 53 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux