On Tue, 26 Apr 2011 13:59:34 -0700
Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> wrote:
> What about simply removing the nr_saved_scan logic and permitting small
> scans? That simplifies the code and I bet it makes no measurable
> performance difference.
>
ok, v2 here. How this looks ?
For memcg, I think I should add select_victim_node() for direct reclaim,
then, we'll be tune big memcg using small memory on a zone case.
==
At memory reclaim, we determine the number of pages to be scanned
per zone as
(anon + file) >> priority.
Assume
scan = (anon + file) >> priority.
If scan < SWAP_CLUSTER_MAX, the scan will be skipped for this time
and priority gets higher. This has some problems.
1. This increases priority as 1 without any scan.
To do scan in this priority, amount of pages should be larger than 512M.
If pages>>priority < SWAP_CLUSTER_MAX, it's recorded and scan will be
batched, later. (But we lose 1 priority.)
But if the amount of pages is smaller than 16M, no scan at priority==0
forever.
2. If zone->all_unreclaimabe==true, it's scanned only when priority==0.
So, x86's ZONE_DMA will never be recoverred until the user of pages
frees memory by itself.
3. With memcg, the limit of memory can be small. When using small memcg,
it gets priority < DEF_PRIORITY-2 very easily and need to call
wait_iff_congested().
For doing scan before priorty=9, 64MB of memory should be used.
Then, this patch tries to scan SWAP_CLUSTER_MAX of pages in force...when
1. the target is enough small.
2. it's kswapd or memcg reclaim.
Then we can avoid rapid priority drop and may be able to recover
all_unreclaimable in a small zones.
Changelog v1->v2:
- removed nr_scan_try_batch
- scan anon and file if the target memory is very small.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@xxxxxxxxxxxxxx>
---
mm/vmscan.c | 60 +++++++++++++++++++++++++++++++++---------------------------
1 file changed, 33 insertions(+), 27 deletions(-)
Index: memcg/mm/vmscan.c
===================================================================
--- memcg.orig/mm/vmscan.c
+++ memcg/mm/vmscan.c
@@ -1700,26 +1700,6 @@ static unsigned long shrink_list(enum lr
}
/*
- * Smallish @nr_to_scan's are deposited in @nr_saved_scan,
- * until we collected @swap_cluster_max pages to scan.
- */
-static unsigned long nr_scan_try_batch(unsigned long nr_to_scan,
- unsigned long *nr_saved_scan)
-{
- unsigned long nr;
-
- *nr_saved_scan += nr_to_scan;
- nr = *nr_saved_scan;
-
- if (nr >= SWAP_CLUSTER_MAX)
- *nr_saved_scan = 0;
- else
- nr = 0;
-
- return nr;
-}
-
-/*
* Determine how aggressively the anon and file LRU lists should be
* scanned. The relative value of each set of LRU lists is determined
* by looking at the fraction of the pages scanned we did rotate back
@@ -1737,6 +1717,22 @@ static void get_scan_count(struct zone *
u64 fraction[2], denominator;
enum lru_list l;
int noswap = 0;
+ int force_scan = 0;
+
+
+ anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
+ zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
+ file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
+ zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
+
+ if (((anon + file) >> priority) < SWAP_CLUSTER_MAX) {
+ /* kswapd does zone balancing and need to scan this zone */
+ if (scanning_global_lru(sc) && current_is_kswapd())
+ force_scan = 1;
+ /* memcg may have small limit and need to avoid priority drop */
+ if (!scanning_global_lru(sc))
+ force_scan = 1;
+ }
/* If we have no swap space, do not bother scanning anon pages. */
if (!sc->may_swap || (nr_swap_pages <= 0)) {
@@ -1747,11 +1743,6 @@ static void get_scan_count(struct zone *
goto out;
}
- anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
- zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
- file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
- zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
-
if (scanning_global_lru(sc)) {
free = zone_page_state(zone, NR_FREE_PAGES);
/* If we have very few page cache pages,
@@ -1818,8 +1809,23 @@ out:
scan >>= priority;
scan = div64_u64(scan * fraction[file], denominator);
}
- nr[l] = nr_scan_try_batch(scan,
- &reclaim_stat->nr_saved_scan[l]);
+
+ /*
+ * If zone is small or memcg is small, nr[l] can be 0.
+ * This results no-scan on this priority and priority drop down.
+ * For global direct reclaim, it can visit next zone and tend
+ * not to have problems. For global kswapd, it's for zone
+ * balancing and it need to scan a small amounts. When using
+ * memcg, priority drop can cause big latency. So, it's better
+ * to scan small amount. See may_noscan above.
+ */
+ if (!scan && force_scan) {
+ if (file)
+ scan = SWAP_CLUSTER_MAX;
+ else if (!noswap)
+ scan = SWAP_CLUSTER_MAX;
+ }
+ nr[l] = scan;
}
}
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxxx For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>