Hi -
This patch triggered an oops for me (more below).
On 2/12/19 4:53 AM, Michal Hocko wrote:
[snip]
Fix the issue by reworking how x86 initializes the memory less nodes.
The current implementation is hacked into the workflow and it doesn't
allow any flexibility. There is init_memory_less_node called for each
offline node that has a CPU as already mentioned above. This will make
sure that we will have a new online node without any memory. Much later
on we build a zone list for this node and things seem to work, except
they do not (e.g. due to nr_cpus). Not to mention that it doesn't really
make much sense to consider an empty node as online because we just
consider this node whenever we want to iterate nodes to use and empty
node is obviously not the best candidate. This is all just too fragile.
The problem might be in here - I have a case with a 'memoryless' node
that has CPUs that get onlined during SMP boot, but that onlining
triggers a page fault during device registration.
I'm running on a NUMA machine but I marked all of the memory on node 1
as type 12 (PRAM), using the memmap arg. That makes node 1 appear to
have no memory.
During SMP boot, the fault is in bus_add_device():
error = sysfs_create_link(&bus->p->devices_kset->kobj,
bus->p is NULL.
That p is the subsys_private struct, and it should have been set in
postcore_initcall(register_node_type);
But that happens after SMP boot. This fault happens during SMP boot.
The old code had set this node online via alloc_node_data(), so when it
came time to do_cpu_up() -> try_online_node(), the node was already up
and nothing happened.
Now, it attempts to online the node, which registers the node with
sysfs, but that can't happen before the 'node' subsystem is registered.
My modified e820 map looks like this:
[ 0.000000] user: [mem 0x0000000000000100-0x000000000009c7ff] usable
[ 0.000000] user: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] user: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000000100000-0x0000000073216fff] usable
[ 0.000000] user: [mem 0x0000000073217000-0x0000000075316fff] reserved
[ 0.000000] user: [mem 0x0000000075317000-0x00000000754f8fff] ACPI data
[ 0.000000] user: [mem 0x00000000754f9000-0x0000000076057fff] ACPI NVS
[ 0.000000] user: [mem 0x0000000076058000-0x0000000077ae9fff] reserved
[ 0.000000] user: [mem 0x0000000077aea000-0x0000000077ffffff] usable
[ 0.000000] user: [mem 0x0000000078000000-0x000000008fffffff] reserved
[ 0.000000] user: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] user: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] user: [mem 0x0000000100000000-0x00000004ffffffff] usable
[ 0.000000] user: [mem 0x0000000500000000-0x000000603fffffff] persistent (type 12)
Which leads to an empty zone 1:
[ 0.016060] Initmem setup node 0 [mem 0x0000000000001000-0x00000004ffffffff]
[ 0.073310] Initmem setup node 1 [mem 0x0000000000000000-0x0000000000000000]
The backtrace:
[ 2.175327] Call Trace:
[ 2.175327] device_add+0x43e/0x690
[ 2.175327] device_register+0x107/0x110
[ 2.175327] __register_one_node+0x72/0x150
[ 2.175327] __try_online_node+0x8f/0xd0
[ 2.175327] try_online_node+0x2b/0x50
[ 2.175327] do_cpu_up+0x46/0xf0
[ 2.175327] cpu_up+0x13/0x20
[ 2.175327] smp_init+0x6e/0xd0
[ 2.175327] kernel_init_freeable+0xe5/0x21f
[ 2.175327] ? rest_init+0xb0/0xb0
[ 2.175327] kernel_init+0xf/0x180
[ 2.175327] ? rest_init+0xb0/0xb0
[ 2.175327] ret_from_fork+0x1f/0x30
To get it booting again, I unconditionally node_set_online:
arch/x86/mm/numa.c
@@ -583,7 +583,7 @@ static int __init numa_register_memblks(struct
numa_meminfo *mi)
continue;
alloc_node_data(nid);
- if (end)
+ //if (end)
node_set_online(nid);
}
A more elegant solution may be to avoid registering with sysfs during
early boot, or something else entirely. But I figured I'd ask for help
at this point. =)
Thanks,
Barret
