[PATCH] mm: fix inactive list balancing between NUMA nodes and cgroups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



During !CONFIG_CGROUP reclaim, we expand the inactive list size if
it's thrashing on the node that is about to be reclaimed. But when
cgroups are enabled, we suddenly ignore the node scope and use the
cgroup scope only. The result is that pressure bleeds between NUMA
nodes depending on whether cgroups are merely compiled into Linux.
This behavioral difference is unexpected and undesirable.

When the refault adaptivity of the inactive list was first introduced,
there were no statistics at the lruvec level - the intersection of
node and memcg - so it was better than nothing.

But now that we have that infrastructure, use lruvec_page_state() to
make the list balancing decision always NUMA aware.

Fixes: 2a2e48854d70 ("mm: vmscan: fix IO/refault regression in cache workingset transition")
Signed-off-by: Johannes Weiner <hannes@xxxxxxxxxxx>
---
 mm/vmscan.c | 29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 347c9b3b29ac..c9f8afe61ae3 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2138,7 +2138,6 @@ static void shrink_active_list(unsigned long nr_to_scan,
  *   10TB     320        32GB
  */
 static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
-				 struct mem_cgroup *memcg,
 				 struct scan_control *sc, bool actual_reclaim)
 {
 	enum lru_list active_lru = file * LRU_FILE + LRU_ACTIVE;
@@ -2159,16 +2158,12 @@ static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
 	inactive = lruvec_lru_size(lruvec, inactive_lru, sc->reclaim_idx);
 	active = lruvec_lru_size(lruvec, active_lru, sc->reclaim_idx);
 
-	if (memcg)
-		refaults = memcg_page_state(memcg, WORKINGSET_ACTIVATE);
-	else
-		refaults = node_page_state(pgdat, WORKINGSET_ACTIVATE);
-
 	/*
 	 * When refaults are being observed, it means a new workingset
 	 * is being established. Disable active list protection to get
 	 * rid of the stale workingset quickly.
 	 */
+	refaults = lruvec_page_state(lruvec, WORKINGSET_ACTIVATE);
 	if (file && actual_reclaim && lruvec->refaults != refaults) {
 		inactive_ratio = 0;
 	} else {
@@ -2189,12 +2184,10 @@ static bool inactive_list_is_low(struct lruvec *lruvec, bool file,
 }
 
 static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
-				 struct lruvec *lruvec, struct mem_cgroup *memcg,
-				 struct scan_control *sc)
+				 struct lruvec *lruvec, struct scan_control *sc)
 {
 	if (is_active_lru(lru)) {
-		if (inactive_list_is_low(lruvec, is_file_lru(lru),
-					 memcg, sc, true))
+		if (inactive_list_is_low(lruvec, is_file_lru(lru), sc, true))
 			shrink_active_list(nr_to_scan, lruvec, sc, lru);
 		return 0;
 	}
@@ -2293,7 +2286,7 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
 			 * anonymous pages on the LRU in eligible zones.
 			 * Otherwise, the small LRU gets thrashed.
 			 */
-			if (!inactive_list_is_low(lruvec, false, memcg, sc, false) &&
+			if (!inactive_list_is_low(lruvec, false, sc, false) &&
 			    lruvec_lru_size(lruvec, LRU_INACTIVE_ANON, sc->reclaim_idx)
 					>> sc->priority) {
 				scan_balance = SCAN_ANON;
@@ -2311,7 +2304,7 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
 	 * lruvec even if it has plenty of old anonymous pages unless the
 	 * system is under heavy pressure.
 	 */
-	if (!inactive_list_is_low(lruvec, true, memcg, sc, false) &&
+	if (!inactive_list_is_low(lruvec, true, sc, false) &&
 	    lruvec_lru_size(lruvec, LRU_INACTIVE_FILE, sc->reclaim_idx) >> sc->priority) {
 		scan_balance = SCAN_FILE;
 		goto out;
@@ -2515,7 +2508,7 @@ static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memc
 				nr[lru] -= nr_to_scan;
 
 				nr_reclaimed += shrink_list(lru, nr_to_scan,
-							    lruvec, memcg, sc);
+							    lruvec, sc);
 			}
 		}
 
@@ -2582,7 +2575,7 @@ static void shrink_node_memcg(struct pglist_data *pgdat, struct mem_cgroup *memc
 	 * Even if we did not try to evict anon pages at all, we want to
 	 * rebalance the anon lru active/inactive ratio.
 	 */
-	if (inactive_list_is_low(lruvec, false, memcg, sc, true))
+	if (inactive_list_is_low(lruvec, false, sc, true))
 		shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
 				   sc, LRU_ACTIVE_ANON);
 }
@@ -2985,12 +2978,8 @@ static void snapshot_refaults(struct mem_cgroup *root_memcg, pg_data_t *pgdat)
 		unsigned long refaults;
 		struct lruvec *lruvec;
 
-		if (memcg)
-			refaults = memcg_page_state(memcg, WORKINGSET_ACTIVATE);
-		else
-			refaults = node_page_state(pgdat, WORKINGSET_ACTIVATE);
-
 		lruvec = mem_cgroup_lruvec(pgdat, memcg);
+		refaults = lruvec_page_state_local(lruvec, WORKINGSET_ACTIVATE);
 		lruvec->refaults = refaults;
 	} while ((memcg = mem_cgroup_iter(root_memcg, memcg, NULL)));
 }
@@ -3346,7 +3335,7 @@ static void age_active_anon(struct pglist_data *pgdat,
 	do {
 		struct lruvec *lruvec = mem_cgroup_lruvec(pgdat, memcg);
 
-		if (inactive_list_is_low(lruvec, false, memcg, sc, true))
+		if (inactive_list_is_low(lruvec, false, sc, true))
 			shrink_active_list(SWAP_CLUSTER_MAX, lruvec,
 					   sc, LRU_ACTIVE_ANON);
 
-- 
2.21.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux