Re: [PATCH REBASED] mm, memcg: Make scan aggression always exclude protection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 22, 2019 at 04:03:07PM +0000, Chris Down wrote:
> This patch is an incremental improvement on the existing
> memory.{low,min} relative reclaim work to base its scan pressure
> calculations on how much protection is available compared to the current
> usage, rather than how much the current usage is over some protection
> threshold.
> 
> Previously the way that memory.low protection works is that if you are
> 50% over a certain baseline, you get 50% of your normal scan pressure.
> This is certainly better than the previous cliff-edge behaviour, but it
> can be improved even further by always considering memory under the
> currently enforced protection threshold to be out of bounds. This means
> that we can set relatively low memory.low thresholds for variable or
> bursty workloads while still getting a reasonable level of protection,
> whereas with the previous version we may still trivially hit the 100%
> clamp. The previous 100% clamp is also somewhat arbitrary, whereas this
> one is more concretely based on the currently enforced protection
> threshold, which is likely easier to reason about.
> 
> There is also a subtle issue with the way that proportional reclaim
> worked previously -- it promotes having no memory.low, since it makes
> pressure higher during low reclaim. This happens because we base our
> scan pressure modulation on how far memory.current is between memory.min
> and memory.low, but if memory.low is unset, we only use the overage
> method. In most cromulent configurations, this then means that we end up
> with *more* pressure than with no memory.low at all when we're in low
> reclaim, which is not really very usable or expected.
> 
> With this patch, memory.low and memory.min affect reclaim pressure in a
> more understandable and composable way. For example, from a user
> standpoint, "protected" memory now remains untouchable from a reclaim
> aggression standpoint, and users can also have more confidence that
> bursty workloads will still receive some amount of guaranteed
> protection.
> 
> Signed-off-by: Chris Down <chris@xxxxxxxxxxxxxx>
> Reviewed-by: Roman Gushchin <guro@xxxxxx>
> Cc: Johannes Weiner <hannes@xxxxxxxxxxx>
> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> Cc: Michal Hocko <mhocko@xxxxxxxxxx>
> Cc: Tejun Heo <tj@xxxxxxxxxx>
> Cc: Roman Gushchin <guro@xxxxxx>
> Cc: Dennis Zhou <dennis@xxxxxxxxxx>
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: cgroups@xxxxxxxxxxxxxxx
> Cc: linux-mm@xxxxxxxxx
> Cc: kernel-team@xxxxxx
> ---
>  include/linux/memcontrol.h | 25 ++++++++--------
>  mm/vmscan.c                | 61 +++++++++++++-------------------------
>  2 files changed, 32 insertions(+), 54 deletions(-)
> 
> No functional changes, just rebased.
> 
> diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
> index b226c4bafc93..799de23edfb7 100644
> --- a/include/linux/memcontrol.h
> +++ b/include/linux/memcontrol.h
> @@ -333,17 +333,17 @@ static inline bool mem_cgroup_disabled(void)
>  	return !cgroup_subsys_enabled(memory_cgrp_subsys);
>  }
>  
> -static inline void mem_cgroup_protection(struct mem_cgroup *memcg,
> -					 unsigned long *min, unsigned long *low)
> +static inline unsigned long mem_cgroup_protection(struct mem_cgroup *memcg,
> +						  bool in_low_reclaim)
>  {
> -	if (mem_cgroup_disabled()) {
> -		*min = 0;
> -		*low = 0;
> -		return;
> -	}
> +	if (mem_cgroup_disabled())
> +		return 0;
> +
> +	if (in_low_reclaim)
> +		return READ_ONCE(memcg->memory.emin);
>  
> -	*min = READ_ONCE(memcg->memory.emin);
> -	*low = READ_ONCE(memcg->memory.elow);
> +	return max(READ_ONCE(memcg->memory.emin),
> +		   READ_ONCE(memcg->memory.elow));
>  }
>  
>  enum mem_cgroup_protection mem_cgroup_protected(struct mem_cgroup *root,
> @@ -845,11 +845,10 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
>  {
>  }
>  
> -static inline void mem_cgroup_protection(struct mem_cgroup *memcg,
> -					 unsigned long *min, unsigned long *low)
> +static inline unsigned long mem_cgroup_protection(struct mem_cgroup *memcg,
> +						  bool in_low_reclaim)
>  {
> -	*min = 0;
> -	*low = 0;
> +	return 0;
>  }
>  
>  static inline enum mem_cgroup_protection mem_cgroup_protected(
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index f6b9b45f731d..d5daa224364d 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -2374,12 +2374,13 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
>  		int file = is_file_lru(lru);
>  		unsigned long lruvec_size;
>  		unsigned long scan;
> -		unsigned long min, low;
> +		unsigned long protection;
>  
>  		lruvec_size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx);
> -		mem_cgroup_protection(memcg, &min, &low);
> +		protection = mem_cgroup_protection(memcg,
> +						   sc->memcg_low_reclaim);
>  
> -		if (min || low) {
> +		if (protection) {
>  			/*
>  			 * Scale a cgroup's reclaim pressure by proportioning
>  			 * its current usage to its memory.low or memory.min
> @@ -2392,13 +2393,10 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
>  			 * setting extremely liberal protection thresholds. It
>  			 * also means we simply get no protection at all if we
>  			 * set it too low, which is not ideal.
> -			 */
> -			unsigned long cgroup_size = mem_cgroup_size(memcg);
> -
> -			/*
> -			 * If there is any protection in place, we adjust scan
> -			 * pressure in proportion to how much a group's current
> -			 * usage exceeds that, in percent.
> +			 *
> +			 * If there is any protection in place, we reduce scan
> +			 * pressure by how much of the total memory used is
> +			 * within protection thresholds.
>  			 *
>  			 * There is one special case: in the first reclaim pass,
>  			 * we skip over all groups that are within their low
> @@ -2408,43 +2406,24 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
>  			 * ideally want to honor how well-behaved groups are in
>  			 * that case instead of simply punishing them all
>  			 * equally. As such, we reclaim them based on how much
> -			 * of their best-effort protection they are using. Usage
> -			 * below memory.min is excluded from consideration when
> -			 * calculating utilisation, as it isn't ever
> -			 * reclaimable, so it might as well not exist for our
> -			 * purposes.
> +			 * memory they are using, reducing the scan pressure
> +			 * again by how much of the total memory used is under
> +			 * hard protection.
>  			 */
> -			if (sc->memcg_low_reclaim && low > min) {
> -				/*
> -				 * Reclaim according to utilisation between min
> -				 * and low
> -				 */
> -				scan = lruvec_size * (cgroup_size - min) /
> -					(low - min);
> -			} else {
> -				/* Reclaim according to protection overage */
> -				scan = lruvec_size * cgroup_size /
> -					max(min, low) - lruvec_size;

I've noticed that the old version is just wrong: if cgroup_size is way smaller
than max(min, low), scan will be set to -lruvec_size.
Given that it's unsigned long, we'll end up with scanning the whole list
(due to clamp() below).

So the new commit should be probably squashed into the previous and
generally treated as a fix.

Thanks!





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux