In preparation of KASAN, move early_init() into a separate
file in order to allow deactivation of KASAN for that function.
Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
---
arch/powerpc/kernel/Makefile | 2 +-
arch/powerpc/kernel/early_32.c | 36 ++++++++++++++++++++++++++++++++++++
arch/powerpc/kernel/setup_32.c | 28 ----------------------------
3 files changed, 37 insertions(+), 29 deletions(-)
create mode 100644 arch/powerpc/kernel/early_32.c
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index cddadccf551d..45e47752b692 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -93,7 +93,7 @@ extra-y += vmlinux.lds
obj-$(CONFIG_RELOCATABLE) += reloc_$(BITS).o
-obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
+obj-$(CONFIG_PPC32) += entry_32.o setup_32.o early_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
diff --git a/arch/powerpc/kernel/early_32.c b/arch/powerpc/kernel/early_32.c
new file mode 100644
index 000000000000..cf3cdd81dc47
--- /dev/null
+++ b/arch/powerpc/kernel/early_32.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Early init before relocation
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/asm-prototypes.h>
+
+/*
+ * We're called here very early in the boot.
+ *
+ * Note that the kernel may be running at an address which is different
+ * from the address that it was linked at, so we must use RELOC/PTRRELOC
+ * to access static data (including strings). -- paulus
+ */
+notrace unsigned long __init early_init(unsigned long dt_ptr)
+{
+ unsigned long offset = reloc_offset();
+
+ /* First zero the BSS -- use memset_io, some platforms don't have caches on yet */
+ memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
+
+ /*
+ * Identify the CPU type and fix up code sections
+ * that depend on which cpu we have.
+ */
+ identify_cpu(offset, mfspr(SPRN_PVR));
+
+ apply_feature_fixups();
+
+ return KERNELBASE + offset;
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1f0b7629c1a6..3f0d51b4b2f5 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -63,34 +63,6 @@ EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
/*
- * We're called here very early in the boot.
- *
- * Note that the kernel may be running at an address which is different
- * from the address that it was linked at, so we must use RELOC/PTRRELOC
- * to access static data (including strings). -- paulus
- */
-notrace unsigned long __init early_init(unsigned long dt_ptr)
-{
- unsigned long offset = reloc_offset();
-
- /* First zero the BSS -- use memset_io, some platforms don't have
- * caches on yet */
- memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
- __bss_stop - __bss_start);
-
- /*
- * Identify the CPU type and fix up code sections
- * that depend on which cpu we have.
- */
- identify_cpu(offset, mfspr(SPRN_PVR));
-
- apply_feature_fixups();
-
- return KERNELBASE + offset;
-}
-
-
-/*
* This is run before start_kernel(), the kernel has been relocated
* and we are running with enough of the MMU enabled to have our
* proper kernel virtual addresses
--
2.13.3
