[PATCH 4/5] mm/memory_hotplug: Simplify node_states_check_changes_online

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Oscar Salvador <osalvador@xxxxxxx>

While looking at node_states_check_changes_online, I stumbled
upon some confusing things.

Right after entering the function, we find this:

if (N_MEMORY == N_NORMAL_MEMORY)
        zone_last = ZONE_MOVABLE;

This is wrong.
N_MEMORY cannot really be equal to N_NORMAL_MEMORY.
My guess is that this wanted to be something like:

if (N_NORMAL_MEMORY == N_HIGH_MEMORY)

to check if we have CONFIG_HIGHMEM.

Later on, in the CONFIG_HIGHMEM block, we have:

if (N_MEMORY == N_HIGH_MEMORY)
        zone_last = ZONE_MOVABLE;

Again, this is wrong, and will never be evaluated to true.

Besides removing these wrong if statements, I simplified
the function a bit.

Signed-off-by: Oscar Salvador <osalvador@xxxxxxx>
---
 mm/memory_hotplug.c | 71 +++++++++++++++++------------------------------------
 1 file changed, 23 insertions(+), 48 deletions(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 131c08106d54..ab3c1de18c5d 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -687,61 +687,36 @@ static void node_states_check_changes_online(unsigned long nr_pages,
 	struct zone *zone, struct memory_notify *arg)
 {
 	int nid = zone_to_nid(zone);
-	enum zone_type zone_last = ZONE_NORMAL;
 
 	/*
-	 * If we have HIGHMEM or movable node, node_states[N_NORMAL_MEMORY]
-	 * contains nodes which have zones of 0...ZONE_NORMAL,
-	 * set zone_last to ZONE_NORMAL.
-	 *
-	 * If we don't have HIGHMEM nor movable node,
-	 * node_states[N_NORMAL_MEMORY] contains nodes which have zones of
-	 * 0...ZONE_MOVABLE, set zone_last to ZONE_MOVABLE.
+	 * zone_for_pfn_range() can only return a zone within
+	 * (0..ZONE_NORMAL] or ZONE_MOVABLE.
+	 * If the zone is within the range (0..ZONE_NORMAL],
+	 * we need to check if:
+	 * 1) We need to set the node for N_NORMAL_MEMORY
+	 * 2) On CONFIG_HIGHMEM systems, we need to also set
+	 *    the node for N_HIGH_MEMORY.
+	 * 3) On !CONFIG_HIGHMEM, we can disregard N_HIGH_MEMORY,
+	 *    as N_HIGH_MEMORY falls back to N_NORMAL_MEMORY.
 	 */
-	if (N_MEMORY == N_NORMAL_MEMORY)
-		zone_last = ZONE_MOVABLE;
 
-	/*
-	 * if the memory to be online is in a zone of 0...zone_last, and
-	 * the zones of 0...zone_last don't have memory before online, we will
-	 * need to set the node to node_states[N_NORMAL_MEMORY] after
-	 * the memory is online.
-	 */
-	if (zone_idx(zone) <= zone_last && !node_state(nid, N_NORMAL_MEMORY))
-		arg->status_change_nid_normal = nid;
-	else
-		arg->status_change_nid_normal = -1;
-
-#ifdef CONFIG_HIGHMEM
-	/*
-	 * If we have movable node, node_states[N_HIGH_MEMORY]
-	 * contains nodes which have zones of 0...ZONE_HIGHMEM,
-	 * set zone_last to ZONE_HIGHMEM.
-	 *
-	 * If we don't have movable node, node_states[N_NORMAL_MEMORY]
-	 * contains nodes which have zones of 0...ZONE_MOVABLE,
-	 * set zone_last to ZONE_MOVABLE.
-	 */
-	zone_last = ZONE_HIGHMEM;
-	if (N_MEMORY == N_HIGH_MEMORY)
-		zone_last = ZONE_MOVABLE;
+	if (zone_idx(zone) <= ZONE_NORMAL) {
+		if (!node_state(nid, N_NORMAL_MEMORY))
+			arg->status_change_nid_normal = nid;
+		else
+			arg->status_change_nid_normal = -1;
 
-	if (zone_idx(zone) <= zone_last && !node_state(nid, N_HIGH_MEMORY))
-		arg->status_change_nid_high = nid;
-	else
-		arg->status_change_nid_high = -1;
-#else
-	/*
-	 * When !CONFIG_HIGHMEM, N_HIGH_MEMORY equals N_NORMAL_MEMORY
-	 * so setting the node for N_NORMAL_MEMORY is enough.
-	 */
-	arg->status_change_nid_high = -1;
-#endif
+		if (IS_ENABLED(CONFIG_HIGHMEM)) {
+			if (!node_state(nid, N_HIGH_MEMORY))
+				arg->status_change_nid_high = nid;
+		} else
+			arg->status_change_nid_high = -1;
+	}
 
 	/*
-	 * if the node don't have memory befor online, we will need to
-	 * set the node to node_states[N_MEMORY] after the memory
-	 * is online.
+	 * if the node doesn't have memory before onlining it, we will need
+	 * to set the node to node_states[N_MEMORY] after the memory
+	 * gets onlined.
 	 */
 	if (!node_state(nid, N_MEMORY))
 		arg->status_change_nid = nid;
-- 
2.13.6




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux