Thanks for the advice. I tried removing BDI_CAP_STRICTLIMIT, and it works. There is no balance_dirty_pages() triggered, and the performance improves a lot. Tested by libfuse passthrough_ll example and fio: ./passthrough_ll -o writeback /mnt/fuse/ fio --name=test --ioengine=psync --directory=/mnt/fuse/home/test --bs=4k --direct=0 --size=64M --rw=write --fallocate=0 --numjobs=1 performance with BDI_CAP_STRICTLIMIT: WRITE: bw=158MiB/s (165MB/s), 158MiB/s-158MiB/s (165MB/s-165MB/s), io=64.0MiB (67.1MB), run=406-406msec Performance without BDI_CAP_STRICTLIMIT: WRITE: bw=1561MiB/s (1637MB/s), 1561MiB/s-1561MiB/s (1637MB/s-1637MB/s), io=64.0MiB (67.1MB), run=41-41msec However, I wonder if there are some side-effects to remove it? Since it seems that the original purpose of this feature is to prevent FUSE from consuming too much memory. Please correct me if I am mistaken. Thanks in advance. Regards, Shuoran -----邮件原件----- 发件人: Miklos Szeredi [mailto:miklos@xxxxxxxxxx] 发送时间: 2018年8月9日 16:30 收件人: 刘硕然 <liushuoran@xxxxxx> 抄送: linux-fsdevel@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx 主题: Re: FUSE: write operations trigger balance_dirty_pages when using writeback cache On Thu, Aug 9, 2018 at 9:31 AM, 刘硕然 <liushuoran@xxxxxx> wrote: > Thank you for the prompt reply. > > I tried this config, but still can get balance_dirty_pages triggered. I think it may be due to BDI_CAP_STRICTLIMIT used by fuse. If you remove that setting from fuse in the kernel you should not be getting the balance_dirty_pages() as often. Not sure if that's the realproblem, though, that depends on how much time is spent in balance_dirty_pages(). You can try profiling the kernel to find that out. My guess is that the real cause of the slowdown is some other place. There's for example a known issue with selinux related getxattr thrashing. Disabling getxattr on your filesystem may significantly improve performance. Thanks, Miklos
