Re: [RFC PATCH v2 22/27] x86/cet/ibt: User-mode indirect branch tracking support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2018-07-11 at 15:40 -0700, Dave Hansen wrote:
> On 07/11/2018 03:10 PM, Yu-cheng Yu wrote:
> > 
> > On Tue, 2018-07-10 at 17:11 -0700, Dave Hansen wrote:
> > > 
> > > Is this feature *integral* to shadow stacks?  Or, should it just
> > > be
> > > in a
> > > different series?
> > The whole CET series is mostly about SHSTK and only a minority for
> > IBT.
> > IBT changes cannot be applied by itself without first applying
> > SHSTK
> > changes.  Would the titles help, e.g. x86/cet/ibt, x86/cet/shstk,
> > etc.?
> That doesn't really answer what I asked, though.
> 
> Do shadow stacks *require* IBT?  Or, should we concentrate on merging
> shadow stacks themselves first and then do IBT at a later time, in a
> different patch series?
> 
> But, yes, better patch titles would help, although I'm not sure
> that's
> quite the format that Ingo and Thomas prefer.

Shadow stack does not require IBT, but they complement each other.  If
we can resolve the legacy bitmap, both features can be merged at the
same time.

> 
> > 
> > > 
> > > > 
> > > > +int cet_setup_ibt_bitmap(void)
> > > > +{
> > > > +	u64 r;
> > > > +	unsigned long bitmap;
> > > > +	unsigned long size;
> > > > +
> > > > +	if (!cpu_feature_enabled(X86_FEATURE_IBT))
> > > > +		return -EOPNOTSUPP;
> > > > +
> > > > +	size = TASK_SIZE_MAX / PAGE_SIZE / BITS_PER_BYTE;
> > > Just a note: this table is going to be gigantic on 5-level paging
> > > systems, and userspace won't, by default use any of that extra
> > > address
> > > space.  I think it ends up being a 512GB allocation in a 128TB
> > > address
> > > space.
> > > 
> > > Is that a problem?
> > > 
> > > On 5-level paging systems, maybe we should just stick it up in
> > > the 
> > > high part of the address space.
> > We do not know in advance if dlopen() needs to create the bitmap.
> >  Do
> > we always reserve high address or force legacy libs to low address?
> Does it matter?  Does code ever get pointers to this area?  Might
> they
> be depending on high address bits for the IBT being clear?

GLIBC does the bitmap setup.  It sets bits in there.
I thought you wanted a smaller bitmap?  One way is forcing legacy libs
to low address, or not having the bitmap at all, i.e. turn IBT off.

> 
> 
> > 
> > > 
> > > > 
> > > > +	bitmap = ibt_mmap(0, size);
> > > > +
> > > > +	if (bitmap >= TASK_SIZE_MAX)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	bitmap &= PAGE_MASK;
> > > We're page-aligning the result of an mmap()?  Why?
> > This may not be necessary.  The lower bits of MSR_IA32_U_CET are
> > settings and not part of the bitmap address.  Is this is safer?
> No.  If we have mmap() returning non-page-aligned addresses, we have
> bigger problems.  Worst-case, do
> 
> 	WARN_ON_ONCE(bitmap & ~PAGE_MASK);
> 

Ok.

> > 
> > > 
> > > > 
> > > > +	current->thread.cet.ibt_bitmap_addr = bitmap;
> > > > +	current->thread.cet.ibt_bitmap_size = size;
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +void cet_disable_ibt(void)
> > > > +{
> > > > +	u64 r;
> > > > +
> > > > +	if (!cpu_feature_enabled(X86_FEATURE_IBT))
> > > > +		return;
> > > Does this need a check for being already disabled?
> > We need that.  We cannot write to those MSRs if the CPU does not
> > support it.
> No, I mean for code doing cet_disable_ibt() twice in a row.

Got it.

> 
> > 
> > > 
> > > > 
> > > > +	rdmsrl(MSR_IA32_U_CET, r);
> > > > +	r &= ~(MSR_IA32_CET_ENDBR_EN | MSR_IA32_CET_LEG_IW_EN
> > > > |
> > > > +	       MSR_IA32_CET_NO_TRACK_EN);
> > > > +	wrmsrl(MSR_IA32_U_CET, r);
> > > > +	current->thread.cet.ibt_enabled = 0;
> > > > +}
> > > What's the locking for current->thread.cet?
> > Now CET is not locked until the application calls ARCH_CET_LOCK.
> No, I mean what is the in-kernel locking for the current->thread.cet
> data structure?  Is there none because it's only every modified via
> current->thread and it's entirely thread-local?

Yes, that is the case.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux