RE: [PATCH v2 39/40] iommu/arm-smmu-v3: Add support for PRI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> 
> For PCI devices that support it, enable the PRI capability and handle PRI Page
> Requests with the generic fault handler. It is enabled on demand by
> iommu_sva_device_init().
> 
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> 
> ---
> v1->v2:
> * Terminate the page request and disable PRI if no handler is registered
> * Enable and disable PRI in sva_device_init/shutdown, instead of
>   add/remove_device
> ---
>  drivers/iommu/arm-smmu-v3.c | 192 +++++++++++++++++++++++++++-------
> --
>  1 file changed, 145 insertions(+), 47 deletions(-)
> 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index 6cb69ace371b..0edbb8d19579 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -248,6 +248,7 @@
>  #define STRTAB_STE_1_S1COR		GENMASK_ULL(5, 4)
>  #define STRTAB_STE_1_S1CSH		GENMASK_ULL(7, 6)
> 
> +#define STRTAB_STE_1_PPAR		(1UL << 18)
>  #define STRTAB_STE_1_S1STALLD		(1UL << 27)
> 
>  #define STRTAB_STE_1_EATS		GENMASK_ULL(29, 28)
> @@ -309,6 +310,9 @@
>  #define CMDQ_PRI_0_SID			GENMASK_ULL(63, 32)
>  #define CMDQ_PRI_1_GRPID		GENMASK_ULL(8, 0)
>  #define CMDQ_PRI_1_RESP			GENMASK_ULL(13, 12)
> +#define CMDQ_PRI_1_RESP_FAILURE
> 	FIELD_PREP(CMDQ_PRI_1_RESP, 0UL)
> +#define CMDQ_PRI_1_RESP_INVALID
> 	FIELD_PREP(CMDQ_PRI_1_RESP, 1UL)
> +#define CMDQ_PRI_1_RESP_SUCCESS
> 	FIELD_PREP(CMDQ_PRI_1_RESP, 2UL)
> 
>  #define CMDQ_RESUME_0_SID		GENMASK_ULL(63, 32)
>  #define CMDQ_RESUME_0_ACTION_RETRY	(1UL << 12)
> @@ -383,12 +387,6 @@ module_param_named(disable_ats_check,
> disable_ats_check, bool, S_IRUGO);
> MODULE_PARM_DESC(disable_ats_check,
>  	"By default, the SMMU checks whether each incoming transaction
> marked as translated is allowed by the stream configuration. This option
> disables the check.");
> 
> -enum pri_resp {
> -	PRI_RESP_DENY = 0,
> -	PRI_RESP_FAIL = 1,
> -	PRI_RESP_SUCC = 2,
> -};
> -
>  enum arm_smmu_msi_index {
>  	EVTQ_MSI_INDEX,
>  	GERROR_MSI_INDEX,
> @@ -471,7 +469,7 @@ struct arm_smmu_cmdq_ent {
>  			u32			sid;
>  			u32			ssid;
>  			u16			grpid;
> -			enum pri_resp		resp;
> +			enum page_response_code	resp;
>  		} pri;
> 
>  		#define CMDQ_OP_RESUME		0x44
> @@ -556,6 +554,7 @@ struct arm_smmu_strtab_ent {
>  	struct arm_smmu_s2_cfg		*s2_cfg;
> 
>  	bool				can_stall;
> +	bool				prg_resp_needs_ssid;
>  };
> 
>  struct arm_smmu_strtab_cfg {
> @@ -907,14 +906,18 @@ static int arm_smmu_cmdq_build_cmd(u64 *cmd,
> struct arm_smmu_cmdq_ent *ent)
>  		cmd[0] |= FIELD_PREP(CMDQ_PRI_0_SID, ent->pri.sid);
>  		cmd[1] |= FIELD_PREP(CMDQ_PRI_1_GRPID, ent->pri.grpid);
>  		switch (ent->pri.resp) {
> -		case PRI_RESP_DENY:
> -		case PRI_RESP_FAIL:
> -		case PRI_RESP_SUCC:
> +		case IOMMU_PAGE_RESP_FAILURE:
> +			cmd[1] |= CMDQ_PRI_1_RESP_FAILURE;
> +			break;
> +		case IOMMU_PAGE_RESP_INVALID:
> +			cmd[1] |= CMDQ_PRI_1_RESP_INVALID;
> +			break;
> +		case IOMMU_PAGE_RESP_SUCCESS:
> +			cmd[1] |= CMDQ_PRI_1_RESP_SUCCESS;
>  			break;
>  		default:
>  			return -EINVAL;
>  		}
> -		cmd[1] |= FIELD_PREP(CMDQ_PRI_1_RESP, ent->pri.resp);
>  		break;
>  	case CMDQ_OP_RESUME:
>  		cmd[0] |= FIELD_PREP(CMDQ_RESUME_0_SID, ent-
> >resume.sid); @@ -1114,8 +1117,15 @@ static int
> arm_smmu_page_response(struct device *dev,
>  		cmd.resume.sid		= sid;
>  		cmd.resume.stag		= resp->page_req_group_id;
>  		cmd.resume.resp		= resp->resp_code;
> +	} else if (master->can_fault) {
> +		cmd.opcode		= CMDQ_OP_PRI_RESP;
> +		cmd.substream_valid	= resp->pasid_present &&
> +					  master->ste.prg_resp_needs_ssid;
> +		cmd.pri.sid		= sid;
> +		cmd.pri.ssid		= resp->pasid;
> +		cmd.pri.grpid		= resp->page_req_group_id;
> +		cmd.pri.resp		= resp->resp_code;
>  	} else {
> -		/* TODO: put PRI response here */
>  		return -ENODEV;
>  	}
> 
> @@ -1236,6 +1246,9 @@ static void arm_smmu_write_strtab_ent(struct
> arm_smmu_device *smmu, u32 sid,
>  			 FIELD_PREP(STRTAB_STE_1_S1CSH,
> ARM_SMMU_SH_ISH) |
>  			 FIELD_PREP(STRTAB_STE_1_STRW, strw));
> 
> +		if (ste->prg_resp_needs_ssid)
> +			dst[1] |= STRTAB_STE_1_PPAR;
> +
>  		if (smmu->features & ARM_SMMU_FEAT_STALLS &&
>  		   !(smmu->features & ARM_SMMU_FEAT_STALL_FORCE) &&
>  		   !ste->can_stall)
> @@ -1471,39 +1484,54 @@ static irqreturn_t arm_smmu_evtq_thread(int
> irq, void *dev)
> 
>  static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64
> *evt)  {
> -	u32 sid, ssid;
> -	u16 grpid;
> -	bool ssv, last;
> -
> -	sid = FIELD_GET(PRIQ_0_SID, evt[0]);
> -	ssv = FIELD_GET(PRIQ_0_SSID_V, evt[0]);
> -	ssid = ssv ? FIELD_GET(PRIQ_0_SSID, evt[0]) : 0;
> -	last = FIELD_GET(PRIQ_0_PRG_LAST, evt[0]);
> -	grpid = FIELD_GET(PRIQ_1_PRG_IDX, evt[1]);
> -
> -	dev_info(smmu->dev, "unexpected PRI request received:\n");
> -	dev_info(smmu->dev,
> -		 "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access
> at iova 0x%016llx\n",
> -		 sid, ssid, grpid, last ? "L" : "",
> -		 evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
> -		 evt[0] & PRIQ_0_PERM_READ ? "R" : "",
> -		 evt[0] & PRIQ_0_PERM_WRITE ? "W" : "",
> -		 evt[0] & PRIQ_0_PERM_EXEC ? "X" : "",
> -		 evt[1] & PRIQ_1_ADDR_MASK);
> -
> -	if (last) {
> -		struct arm_smmu_cmdq_ent cmd = {
> -			.opcode			=
> CMDQ_OP_PRI_RESP,
> -			.substream_valid	= ssv,
> -			.pri			= {
> -				.sid	= sid,
> -				.ssid	= ssid,
> -				.grpid	= grpid,
> -				.resp	= PRI_RESP_DENY,
> -			},
> +	u32 sid = FIELD_PREP(PRIQ_0_SID, evt[0]);
> +
> +	struct arm_smmu_master_data *master;
> +	struct iommu_fault_event fault = {
> +		.type			= IOMMU_FAULT_PAGE_REQ,
> +		.last_req		= FIELD_GET(PRIQ_0_PRG_LAST,
> evt[0]),
> +		.pasid_valid		= FIELD_GET(PRIQ_0_SSID_V, evt[0]),
> +		.pasid			= FIELD_GET(PRIQ_0_SSID, evt[0]),
> +		.page_req_group_id	= FIELD_GET(PRIQ_1_PRG_IDX,
> evt[1]),
> +		.addr			= evt[1] & PRIQ_1_ADDR_MASK,
> +	};
> +
> +	if (evt[0] & PRIQ_0_PERM_READ)
> +		fault.prot |= IOMMU_FAULT_READ;
> +	if (evt[0] & PRIQ_0_PERM_WRITE)
> +		fault.prot |= IOMMU_FAULT_WRITE;
> +	if (evt[0] & PRIQ_0_PERM_EXEC)
> +		fault.prot |= IOMMU_FAULT_EXEC;
> +	if (evt[0] & PRIQ_0_PERM_PRIV)
> +		fault.prot |= IOMMU_FAULT_PRIV;
> +
> +	/* Discard Stop PASID marker, it isn't used */
> +	if (!(fault.prot & (IOMMU_FAULT_READ|IOMMU_FAULT_WRITE)) &&
> +	    fault.last_req)
> +		return;
> +
> +	master = arm_smmu_find_master(smmu, sid);
> +	if (WARN_ON(!master))
> +		return;
> +
> +	if (iommu_report_device_fault(master->dev, &fault)) {
> +		/*
> +		 * No handler registered, so subsequent faults won't produce
> +		 * better results. Try to disable PRI.
> +		 */
> +		struct page_response_msg page_response = {
> +			.addr			= fault.addr,
> +			.pasid			= fault.pasid,
> +			.pasid_present		= fault.pasid_valid,
> +			.page_req_group_id	= fault.page_req_group_id,
> +			.resp_code		=
> IOMMU_PAGE_RESP_FAILURE,
>  		};
> 
> -		arm_smmu_cmdq_issue_cmd(smmu, &cmd);
> +		dev_warn(master->dev,
> +			 "PPR 0x%x:0x%llx 0x%x: nobody cared, disabling
> PRI\n",
> +			 fault.pasid_valid ? fault.pasid : 0, fault.addr,
> +			 fault.prot);
> +		arm_smmu_page_response(master->dev, &page_response);
>  	}
>  }
> 
> @@ -1529,6 +1557,11 @@ static irqreturn_t arm_smmu_priq_thread(int irq,
> void *dev)
>  		}
> 
>  		if (queue_sync_prod(q) == -EOVERFLOW)
> +			/*
> +			 * TODO: flush pending faults, since the SMMU might
> have
> +			 * auto-responded to the Last request of a pending
> +			 * group
> +			 */
>  			dev_err(smmu->dev, "PRIQ overflow detected --
> requests lost\n");
>  	} while (!queue_empty(q));
> 
> @@ -1577,7 +1610,8 @@ static int arm_smmu_flush_queues(void *cookie,
> struct device *dev)
>  		master = dev->iommu_fwspec->iommu_priv;
>  		if (master->ste.can_stall)
>  			arm_smmu_flush_queue(smmu, &smmu->evtq.q,
> "evtq");
> -		/* TODO: add support for PRI */
> +		else if (master->can_fault)
> +			arm_smmu_flush_queue(smmu, &smmu->priq.q,
> "priq");
>  		return 0;
>  	}
> 
> @@ -2301,6 +2335,59 @@ arm_smmu_iova_to_phys(struct iommu_domain
> *domain, dma_addr_t iova)
>  	return ops->iova_to_phys(ops, iova);
>  }
> 
> +static int arm_smmu_enable_pri(struct arm_smmu_master_data *master) {
> +	int ret, pos;
> +	struct pci_dev *pdev;
> +	/*
> +	 * TODO: find a good inflight PPR number. We should divide the PRI
> queue
> +	 * by the number of PRI-capable devices, but it's impossible to know
> +	 * about current and future (hotplugged) devices. So we're at risk of
> +	 * dropping PPRs (and leaking pending requests in the FQ).
> +	 */
> +	size_t max_inflight_pprs = 16;
> +	struct arm_smmu_device *smmu = master->smmu;
> +
> +	if (!(smmu->features & ARM_SMMU_FEAT_PRI) ||
> !dev_is_pci(master->dev))
> +		return -ENOSYS;
> +
> +	pdev = to_pci_dev(master->dev);
> +
> +	ret = pci_reset_pri(pdev);
> +	if (ret)
> +		return ret;
> +
> +	ret = pci_enable_pri(pdev, max_inflight_pprs);
> +	if (ret) {
> +		dev_err(master->dev, "cannot enable PRI: %d\n", ret);
> +		return ret;
> +	}
> +
> +	master->can_fault = true;
> +	master->ste.prg_resp_needs_ssid =
> pci_prg_resp_requires_prefix(pdev);

Any reason why this is not cleared in arm_smmu_disable_pri ?

> +
> +	dev_dbg(master->dev, "enabled PRI\n");
> +
> +	return 0;
> +}
> +
> +static void arm_smmu_disable_pri(struct arm_smmu_master_data
> *master) {
> +	struct pci_dev *pdev;
> +
> +	if (!dev_is_pci(master->dev))
> +		return;
> +
> +	pdev = to_pci_dev(master->dev);
> +
> +	if (!pdev->pri_enabled)
> +		return;
> +
> +	pci_disable_pri(pdev);
> +	dev_dbg(master->dev, "disabled PRI\n");
> +	master->can_fault = false;
> +}
> +
>  static int arm_smmu_sva_init(struct device *dev, struct iommu_sva_param
> *param)  {
>  	int ret;
> @@ -2314,11 +2401,15 @@ static int arm_smmu_sva_init(struct device
> *dev, struct iommu_sva_param *param)
>  		return -EINVAL;
> 
>  	if (param->features & IOMMU_SVA_FEAT_IOPF) {
> -		if (!master->can_fault)
> -			return -EINVAL;
> +		arm_smmu_enable_pri(master);
> +		if (!master->can_fault) {
> +			ret = -ENODEV;
> +			goto err_disable_pri;
> +		}
> +
>  		ret = iopf_queue_add_device(master->smmu->iopf_queue,
> dev);
>  		if (ret)
> -			return ret;
> +			goto err_disable_pri;
>  	}
> 
>  	if (!param->max_pasid)
> @@ -2329,11 +2420,17 @@ static int arm_smmu_sva_init(struct device
> *dev, struct iommu_sva_param *param)
>  	param->max_pasid = min(param->max_pasid, (1U << master-
> >ssid_bits) - 1);
> 
>  	return 0;
> +
> +err_disable_pri:
> +	arm_smmu_disable_pri(master);
> +
> +	return ret;
>  }
> 
>  static void arm_smmu_sva_shutdown(struct device *dev,
>  				  struct iommu_sva_param *param)
>  {
> +	arm_smmu_disable_pri(dev->iommu_fwspec->iommu_priv);
>  	iopf_queue_remove_device(dev);
>  }
> 
> @@ -2671,6 +2768,7 @@ static void arm_smmu_remove_device(struct
> device *dev)
>  	iommu_group_remove_device(dev);
>  	arm_smmu_remove_master(smmu, master);
>  	iommu_device_unlink(&smmu->iommu, dev);
> +	arm_smmu_disable_pri(master);
>  	arm_smmu_disable_ats(master);
>  	kfree(master);
>  	iommu_fwspec_free(dev);
> --
> 2.17.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux