KHWASAN uses the Top Byte Ignore feature of arm64 CPUs to store a pointer tag in the top byte of each pointer. This commit enables the TCR_TBI1 bit, which enables Top Byte Ignore for the kernel, when KHWASAN is used. Signed-off-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx> --- arch/arm64/include/asm/pgtable-hwdef.h | 1 + arch/arm64/mm/proc.S | 8 +++++++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index fd208eac9f2a..483aceedad76 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -289,6 +289,7 @@ #define TCR_A1 (UL(1) << 22) #define TCR_ASID16 (UL(1) << 36) #define TCR_TBI0 (UL(1) << 37) +#define TCR_TBI1 (UL(1) << 38) #define TCR_HA (UL(1) << 39) #define TCR_HD (UL(1) << 40) #define TCR_NFD1 (UL(1) << 54) diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 5f9a73a4452c..f3dfcd74a285 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -47,6 +47,12 @@ /* PTWs cacheable, inner/outer WBWA */ #define TCR_CACHE_FLAGS TCR_IRGN_WBWA | TCR_ORGN_WBWA +#ifdef CONFIG_KASAN_HW +#define TCR_KASAN_FLAGS TCR_TBI1 +#else +#define TCR_KASAN_FLAGS 0 +#endif + #define MAIR(attr, mt) ((attr) << ((mt) * 8)) /* @@ -439,7 +445,7 @@ ENTRY(__cpu_setup) */ ldr x10, =TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \ TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \ - TCR_TBI0 | TCR_A1 + TCR_TBI0 | TCR_A1 | TCR_KASAN_FLAGS tcr_set_idmap_t0sz x10, x9 /* -- 2.17.0.484.g0c8726318c-goog
