On 3/27/2018 9:02 AM, Wei Yang Wrote:
On Sun, Mar 25, 2018 at 08:02:14PM -0700, Jia He wrote:
Commit b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns
where possible") tried to optimize the loop in memmap_init_zone(). But
there is still some room for improvement.
Patch 1 remain the memblock_next_valid_pfn when CONFIG_HAVE_ARCH_PFN_VALID
is enabled
Patch 2 optimizes the memblock_next_valid_pfn()
Patch 3~5 optimizes the early_pfn_valid(), I have to split it into parts
because the changes are located across subsystems.
I tested the pfn loop process in memmap_init(), the same as before.
As for the performance improvement, after this set, I can see the time
overhead of memmap_init() is reduced from 41313 us to 24345 us in my
armv8a server(QDF2400 with 96G memory).
Attached the memblock region information in my server.
[ 86.956758] Zone ranges:
[ 86.959452] DMA [mem 0x0000000000200000-0x00000000ffffffff]
[ 86.966041] Normal [mem 0x0000000100000000-0x00000017ffffffff]
[ 86.972631] Movable zone start for each node
[ 86.977179] Early memory node ranges
[ 86.980985] node 0: [mem 0x0000000000200000-0x000000000021ffff]
[ 86.987666] node 0: [mem 0x0000000000820000-0x000000000307ffff]
[ 86.994348] node 0: [mem 0x0000000003080000-0x000000000308ffff]
[ 87.001029] node 0: [mem 0x0000000003090000-0x00000000031fffff]
[ 87.007710] node 0: [mem 0x0000000003200000-0x00000000033fffff]
[ 87.014392] node 0: [mem 0x0000000003410000-0x000000000563ffff]
[ 87.021073] node 0: [mem 0x0000000005640000-0x000000000567ffff]
[ 87.027754] node 0: [mem 0x0000000005680000-0x00000000056dffff]
[ 87.034435] node 0: [mem 0x00000000056e0000-0x00000000086fffff]
[ 87.041117] node 0: [mem 0x0000000008700000-0x000000000871ffff]
[ 87.047798] node 0: [mem 0x0000000008720000-0x000000000894ffff]
[ 87.054479] node 0: [mem 0x0000000008950000-0x0000000008baffff]
[ 87.061161] node 0: [mem 0x0000000008bb0000-0x0000000008bcffff]
[ 87.067842] node 0: [mem 0x0000000008bd0000-0x0000000008c4ffff]
[ 87.074524] node 0: [mem 0x0000000008c50000-0x0000000008e2ffff]
[ 87.081205] node 0: [mem 0x0000000008e30000-0x0000000008e4ffff]
[ 87.087886] node 0: [mem 0x0000000008e50000-0x0000000008fcffff]
[ 87.094568] node 0: [mem 0x0000000008fd0000-0x000000000910ffff]
[ 87.101249] node 0: [mem 0x0000000009110000-0x00000000092effff]
[ 87.107930] node 0: [mem 0x00000000092f0000-0x000000000930ffff]
[ 87.114612] node 0: [mem 0x0000000009310000-0x000000000963ffff]
[ 87.121293] node 0: [mem 0x0000000009640000-0x000000000e61ffff]
[ 87.127975] node 0: [mem 0x000000000e620000-0x000000000e64ffff]
[ 87.134657] node 0: [mem 0x000000000e650000-0x000000000fffffff]
[ 87.141338] node 0: [mem 0x0000000010800000-0x0000000017feffff]
[ 87.148019] node 0: [mem 0x000000001c000000-0x000000001c00ffff]
[ 87.154701] node 0: [mem 0x000000001c010000-0x000000001c7fffff]
[ 87.161383] node 0: [mem 0x000000001c810000-0x000000007efbffff]
[ 87.168064] node 0: [mem 0x000000007efc0000-0x000000007efdffff]
[ 87.174746] node 0: [mem 0x000000007efe0000-0x000000007efeffff]
[ 87.181427] node 0: [mem 0x000000007eff0000-0x000000007effffff]
[ 87.188108] node 0: [mem 0x000000007f000000-0x00000017ffffffff]
Hi, Jia
I haven't taken a deep look into your code, just one curious question on your
memory layout.
The log above is printed out in free_area_init_nodes(), which iterates on
memblock.memory and prints them. If I am not wrong, memory regions added to
memblock.memory are ordered and merged if possible.
While from your log, I see many regions could be merged but are isolated. For
example, the last two region:
node 0: [mem 0x000000007eff0000-0x000000007effffff]
node 0: [mem 0x000000007f000000-0x00000017ffffffff]
So I am curious why they are isolated instead of combined to one.
>From the code, the possible reason is the region's flag differs from each
other. If you have time, would you mind taking a look into this?
Hi Wei
I thought these 2 have different flags
[ 0.000000] idx=30,region [7eff0000:10000]flag=4 <--- aka
MEMBLOCK_NOMAP
[ 0.000000] node 0: [mem 0x000000007eff0000-0x000000007effffff]
[ 0.000000] idx=31,region [7f000000:81000000]flag=0 <--- aka
MEMBLOCK_NONE
[ 0.000000] node 0: [mem 0x000000007f000000-0x00000017ffffffff]
--
Cheers,
Jia
