From: Joerg Roedel <jroedel@xxxxxxx> Add unconditional cr3 switches between user and kernel cr3 to all non-NMI entry and exit points. Signed-off-by: Joerg Roedel <jroedel@xxxxxxx> --- arch/x86/entry/entry_32.S | 83 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 79 insertions(+), 4 deletions(-) diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 3c4822a..86b3fe6d 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -154,6 +154,33 @@ #endif /* CONFIG_X86_32_LAZY_GS */ +/* Unconditionally switch to user cr3 */ +.macro SWITCH_TO_USER_CR3 scratch_reg:req + ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI + + movl %cr3, \scratch_reg + orl $PTI_SWITCH_MASK, \scratch_reg + movl \scratch_reg, %cr3 +.Lend_\@: +.endm + +/* + * Switch to kernel cr3 if not already loaded and return current cr3 in + * \scratch_reg + */ +.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req + ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI + movl %cr3, \scratch_reg + /* Test if we are already on kernel CR3 */ + testl $PTI_SWITCH_MASK, \scratch_reg + jz .Lend_\@ + andl $(~PTI_SWITCH_MASK), \scratch_reg + movl \scratch_reg, %cr3 + /* Return original CR3 in \scratch_reg */ + orl $PTI_SWITCH_MASK, \scratch_reg +.Lend_\@: +.endm + .macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 cld /* Push segment registers and %eax */ @@ -288,7 +315,6 @@ #endif /* CONFIG_X86_ESPFIX32 */ .endm - /* * Called with pt_regs fully populated and kernel segments loaded, * so we can access PER_CPU and use the integer registers. @@ -301,11 +327,19 @@ */ #define CS_FROM_ENTRY_STACK (1 << 31) +#define CS_FROM_USER_CR3 (1 << 30) .macro SWITCH_TO_KERNEL_STACK ALTERNATIVE "", "jmp .Lend_\@", X86_FEATURE_XENPV + SWITCH_TO_KERNEL_CR3 scratch_reg=%eax + + /* + * %eax now contains the entry cr3 and we carry it forward in + * that register for the time this macro runs + */ + /* Are we on the entry stack? Bail out if not! */ movl PER_CPU_VAR(cpu_entry_area), %edi addl $CPU_ENTRY_AREA_entry_stack, %edi @@ -374,7 +408,8 @@ * but switch back to the entry-stack again when we approach * iret and return to the interrupted code-path. This usually * happens when we hit an exception while restoring user-space - * segment registers on the way back to user-space. + * segment registers on the way back to user-space or when the + * sysenter handler runs with eflags.tf set. * * When we switch to the task-stack here, we can't trust the * contents of the entry-stack anymore, as the exception handler @@ -391,6 +426,7 @@ * * %esi: Entry-Stack pointer (same as %esp) * %edi: Top of the task stack + * %eax: CR3 on kernel entry */ /* Calculate number of bytes on the entry stack in %ecx */ @@ -407,6 +443,14 @@ orl $CS_FROM_ENTRY_STACK, PT_CS(%esp) /* + * Test the cr3 used to enter the kernel and add a marker + * so that we can switch back to it before iret. + */ + testl $PTI_SWITCH_MASK, %eax + jz .Lcopy_pt_regs_\@ + orl $CS_FROM_USER_CR3, PT_CS(%esp) + + /* * %esi and %edi are unchanged, %ecx contains the number of * bytes to copy. The code at .Lcopy_pt_regs_\@ will allocate * the stack-frame on task-stack and copy everything over @@ -472,7 +516,7 @@ /* * This macro handles the case when we return to kernel-mode on the iret - * path and have to switch back to the entry stack. + * path and have to switch back to the entry stack and/or user-cr3 * * See the comments below the .Lentry_from_kernel_\@ label in the * SWITCH_TO_KERNEL_STACK macro for more details. @@ -518,6 +562,18 @@ /* Safe to switch to entry-stack now */ movl %ebx, %esp + /* + * We came from entry-stack and need to check if we also need to + * switch back to user cr3. + */ + testl $CS_FROM_USER_CR3, PT_CS(%esp) + jz .Lend_\@ + + /* Clear marker from stack-frame */ + andl $(~CS_FROM_USER_CR3), PT_CS(%esp) + + SWITCH_TO_USER_CR3 scratch_reg=%eax + .Lend_\@: .endm /* @@ -712,6 +768,18 @@ ENTRY(xen_sysenter_target) * 0(%ebp) arg6 */ ENTRY(entry_SYSENTER_32) + /* + * On entry-stack with all userspace-regs live - save and + * restore eflags and %eax to use it as scratch-reg for the cr3 + * switch. + */ + pushfl + pushl %eax + SWITCH_TO_KERNEL_CR3 scratch_reg=%eax + popl %eax + popfl + + /* Stack empty again, switch to task stack */ movl TSS_entry_stack(%esp), %esp .Lsysenter_past_esp: @@ -792,6 +860,9 @@ ENTRY(entry_SYSENTER_32) /* Switch to entry stack */ movl %eax, %esp + /* Now ready to switch the cr3 */ + SWITCH_TO_USER_CR3 scratch_reg=%eax + /* * Restore all flags except IF. (We restore IF separately because * STI gives a one-instruction window in which we won't be interrupted, @@ -872,7 +943,11 @@ restore_all: .Lrestore_all_notrace: CHECK_AND_APPLY_ESPFIX .Lrestore_nocheck: - RESTORE_REGS 4 # skip orig_eax/error_code + /* Switch back to user CR3 */ + SWITCH_TO_USER_CR3 scratch_reg=%eax + + /* Restore user state */ + RESTORE_REGS pop=4 # skip orig_eax/error_code .Lirq_return: INTERRUPT_RETURN -- 2.7.4
