For flushing the TLB, the ASID which has been programmed into the hardware
must be known. That differs from what is in 'cpu_tlbstate'.
Add functions to transform the 'cpu_tlbstate' values into to the one
programmed into the hardware (CR3).
It's not easy to include mmu_context.h into tlbflush.h, so just move the
CR3 building over to tlbflush.h.
Signed-off-by: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Brian Gerst <brgerst@xxxxxxxxx>
Cc: David Laight <David.Laight@xxxxxxxxxx>
Cc: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
Cc: Eduardo Valentin <eduval@xxxxxxxxxx>
Cc: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
Cc: Juergen Gross <jgross@xxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Will Deacon <will.deacon@xxxxxxx>
Cc: aliguori@xxxxxxxxxx
Cc: daniel.gruss@xxxxxxxxxxxxxx
Cc: hughd@xxxxxxxxxx
Cc: keescook@xxxxxxxxxx
Cc: linux-mm@xxxxxxxxx
---
arch/x86/include/asm/mmu_context.h | 29 +----------------------------
arch/x86/include/asm/tlbflush.h | 26 ++++++++++++++++++++++++++
arch/x86/mm/tlb.c | 8 ++++----
3 files changed, 31 insertions(+), 32 deletions(-)
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -291,33 +291,6 @@ static inline bool arch_vma_access_permi
}
/*
- * If PCID is on, ASID-aware code paths put the ASID+1 into the PCID
- * bits. This serves two purposes. It prevents a nasty situation in
- * which PCID-unaware code saves CR3, loads some other value (with PCID
- * == 0), and then restores CR3, thus corrupting the TLB for ASID 0 if
- * the saved ASID was nonzero. It also means that any bugs involving
- * loading a PCID-enabled CR3 with CR4.PCIDE off will trigger
- * deterministically.
- */
-
-static inline unsigned long build_cr3(struct mm_struct *mm, u16 asid)
-{
- if (static_cpu_has(X86_FEATURE_PCID)) {
- VM_WARN_ON_ONCE(asid > 4094);
- return __sme_pa(mm->pgd) | (asid + 1);
- } else {
- VM_WARN_ON_ONCE(asid != 0);
- return __sme_pa(mm->pgd);
- }
-}
-
-static inline unsigned long build_cr3_noflush(struct mm_struct *mm, u16 asid)
-{
- VM_WARN_ON_ONCE(asid > 4094);
- return __sme_pa(mm->pgd) | (asid + 1) | CR3_NOFLUSH;
-}
-
-/*
* This can be used from process context to figure out what the value of
* CR3 is without needing to do a (slow) __read_cr3().
*
@@ -326,7 +299,7 @@ static inline unsigned long build_cr3_no
*/
static inline unsigned long __get_current_cr3_fast(void)
{
- unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm),
+ unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
this_cpu_read(cpu_tlbstate.loaded_mm_asid));
/* For now, be very restrictive about when this can be called. */
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -69,6 +69,32 @@ static inline u64 inc_mm_tlb_gen(struct
return atomic64_inc_return(&mm->context.tlb_gen);
}
+/*
+ * If PCID is on, ASID-aware code paths put the ASID+1 into the PCID bits.
+ * This serves two purposes. It prevents a nasty situation in which
+ * PCID-unaware code saves CR3, loads some other value (with PCID == 0),
+ * and then restores CR3, thus corrupting the TLB for ASID 0 if the saved
+ * ASID was nonzero. It also means that any bugs involving loading a
+ * PCID-enabled CR3 with CR4.PCIDE off will trigger deterministically.
+ */
+struct pgd_t;
+static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
+{
+ if (static_cpu_has(X86_FEATURE_PCID)) {
+ VM_WARN_ON_ONCE(asid > 4094);
+ return __sme_pa(pgd) | (asid + 1);
+ } else {
+ VM_WARN_ON_ONCE(asid != 0);
+ return __sme_pa(pgd);
+ }
+}
+
+static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
+{
+ VM_WARN_ON_ONCE(asid > 4094);
+ return __sme_pa(pgd) | (asid + 1) | CR3_NOFLUSH;
+}
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -128,7 +128,7 @@ void switch_mm_irqs_off(struct mm_struct
* isn't free.
*/
#ifdef CONFIG_DEBUG_VM
- if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev, prev_asid))) {
+ if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid))) {
/*
* If we were to BUG here, we'd be very likely to kill
* the system so hard that we don't see the call trace.
@@ -195,7 +195,7 @@ void switch_mm_irqs_off(struct mm_struct
if (need_flush) {
this_cpu_write(cpu_tlbstate.ctxs[new_asid].ctx_id, next->context.ctx_id);
this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen);
- write_cr3(build_cr3(next, new_asid));
+ write_cr3(build_cr3(next->pgd, new_asid));
/*
* NB: This gets called via leave_mm() in the idle path
@@ -208,7 +208,7 @@ void switch_mm_irqs_off(struct mm_struct
trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
} else {
/* The new ASID is already up to date. */
- write_cr3(build_cr3_noflush(next, new_asid));
+ write_cr3(build_cr3_noflush(next->pgd, new_asid));
/* See above wrt _rcuidle. */
trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, 0);
@@ -288,7 +288,7 @@ void initialize_tlbstate_and_flush(void)
!(cr4_read_shadow() & X86_CR4_PCIDE));
/* Force ASID 0 and force a TLB flush. */
- write_cr3(build_cr3(mm, 0));
+ write_cr3(build_cr3(mm->pgd, 0));
/* Reinitialize tlbstate. */
this_cpu_write(cpu_tlbstate.loaded_mm_asid, 0);
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
