Re: [PATCH v3 0/3] create sysfs representation of ACPI HMAT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[CC linix-api]

On Wed 13-12-17 19:10:16, Ross Zwisler wrote:
> This is the third revision of my patches adding a sysfs representation
> of the ACPI Heterogeneous Memory Attribute Table (HMAT).  These patches
> are based on v4.15-rc3 and a working tree can be found here:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/zwisler/linux.git/log/?h=hmat_v3
> 
> My goal is to get these patches merged for v4.16.

Has actually reviewed the overal design already for this to be 4.16
thing? I do not see any acks/reviewed-bys in any of the patches...

> Changes from previous version (https://lkml.org/lkml/2017/7/6/749):

... comments on this last posting are touching the surface rather than
really discuss the overal design.

>  - Changed "HMEM" to "HMAT" and "hmem" to "hmat" throughout to make sure
>    that this effort doesn't get confused with Jerome's HMM work and to
>    make it clear that this enabling is tightly tied to the ACPI HMAT
>    table.  (John Hubbard)
> 
>  - Moved the link in the initiator (i.e. mem_init0/mem_tgt2) from
>    pointing to the "mem_tgt2/local_init" attribute group to instead
>    point at the mem_tgt2 target itself.  (Brice Goglin)
> 
>  - Simplified the contents of both the initiators and the targets so
>    that we just symlink to the NUMA node and don't duplicate
>    information.  For initiators this means that we no longer enumerate
>    CPUs, and for targets this means that we don't provide physical
>    address start and length information.  All of this is already
>    available in the NUMA node directory itself (i.e.
>    /sys/devices/system/node/node0), and it already accounts for the fact
>    that both multiple CPUs and multiple memory regions can be owned by a
>    given NUMA node.  Also removed some extra attributes (is_enabled,
>    is_isolated) which I don't think are useful at this point in time.
> 
> I have tested this against many different configs that I implemented
> using qemu.

What is the testing procedure? How can I setup qemu to simlate such HW?

[Keeping the rest of the email for linux-api reference]

> ---
> 
> ==== Quick Summary ====
> 
> Platforms exist today which have multiple types of memory attached to a
> single CPU.  These disparate memory ranges have some characteristics in
> common, such as CPU cache coherence, but they can have wide ranges of
> performance both in terms of latency and bandwidth.
> 
> For example, consider a system that contains persistent memory, standard
> DDR memory and High Bandwidth Memory (HBM), all attached to the same CPU.
> There could potentially be an order of magnitude or more difference in
> performance between the slowest and fastest memory attached to that CPU.
> 
> With the current Linux code NUMA nodes are CPU-centric, so all the memory
> attached to a given CPU will be lumped into the same NUMA node.  This makes
> it very difficult for userspace applications to understand the performance
> of different memory ranges on a given CPU.
> 
> We solve this issue by providing userspace with performance information on
> individual memory ranges.  This performance information is exposed via
> sysfs:
> 
>   # grep . mem_tgt2/* mem_tgt2/local_init/* 2>/dev/null
>   mem_tgt2/firmware_id:1
>   mem_tgt2/is_cached:0
>   mem_tgt2/local_init/read_bw_MBps:40960
>   mem_tgt2/local_init/read_lat_nsec:50
>   mem_tgt2/local_init/write_bw_MBps:40960
>   mem_tgt2/local_init/write_lat_nsec:50
> 
> This allows applications to easily find the memory that they want to use.
> We expect that the existing NUMA APIs will be enhanced to use this new
> information so that applications can continue to use them to select their
> desired memory.

How? Could you provide some examples?

> ==== Lots of Details ====
> 
> This patch set provides a sysfs representation of parts of the
> Heterogeneous Memory Attribute Table (HMAT), newly defined in ACPI 6.2.
> One major conceptual change in ACPI 6.2 related to this work is that
> proximity domains no longer need to contain a processor.  We can now
> have memory-only proximity domains, which means that we can now have
> memory-only Linux NUMA nodes.
> 
> Here is an example configuration where we have a single processor, one
> range of regular memory and one range of HBM:
> 
>   +---------------+   +----------------+
>   | Processor     |   | Memory         |
>   | prox domain 0 +---+ prox domain 1  |
>   | NUMA node 1   |   | NUMA node 2    |
>   +-------+-------+   +----------------+
>           |
>   +-------+----------+
>   | HBM              |
>   | prox domain 2    |
>   | NUMA node 0      |
>   +------------------+
> 
> This gives us one initiator (the processor) and two targets (the two memory
> ranges).  Each of these three has its own ACPI proximity domain and
> associated Linux NUMA node.  Note also that while there is a 1:1 mapping
> from each proximity domain to each NUMA node, the numbers don't necessarily
> match up.  Additionally we can have extra NUMA nodes that don't map back to
> ACPI proximity domains.
> 
> The above configuration could also have the processor and one of the two
> memory ranges sharing a proximity domain and NUMA node, but for the
> purposes of the HMAT the two memory ranges will need to be separated.
> 
> The overall goal of this series and of the HMAT is to allow users to
> identify memory using its performance characteristics.  This is
> complicated by the amount of HMAT data that could be present in very
> large systems, so in this series we only surface performance information
> for local (initiator,target) pairings.  The changelog for patch 5
> discusses this in detail.
> 
> Ross Zwisler (3):
>   acpi: HMAT support in acpi_parse_entries_array()
>   hmat: add heterogeneous memory sysfs support
>   hmat: add performance attributes
> 
>  MAINTAINERS                         |   6 +
>  drivers/acpi/Kconfig                |   1 +
>  drivers/acpi/Makefile               |   1 +
>  drivers/acpi/hmat/Kconfig           |   7 +
>  drivers/acpi/hmat/Makefile          |   2 +
>  drivers/acpi/hmat/core.c            | 797 ++++++++++++++++++++++++++++++++++++
>  drivers/acpi/hmat/hmat.h            |  64 +++
>  drivers/acpi/hmat/initiator.c       |  43 ++
>  drivers/acpi/hmat/perf_attributes.c |  56 +++
>  drivers/acpi/hmat/target.c          |  55 +++
>  drivers/acpi/tables.c               |  52 ++-
>  11 files changed, 1073 insertions(+), 11 deletions(-)
>  create mode 100644 drivers/acpi/hmat/Kconfig
>  create mode 100644 drivers/acpi/hmat/Makefile
>  create mode 100644 drivers/acpi/hmat/core.c
>  create mode 100644 drivers/acpi/hmat/hmat.h
>  create mode 100644 drivers/acpi/hmat/initiator.c
>  create mode 100644 drivers/acpi/hmat/perf_attributes.c
>  create mode 100644 drivers/acpi/hmat/target.c
> 
> -- 
> 2.14.3
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>

-- 
Michal Hocko
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]
  Powered by Linux