On Sat, Nov 11, 2017 at 10:45:24PM +0900, Byungchul Park wrote: > This is the big one including all of version 3. > > You can take only this. Hello Ingo, Could you consider this? I want to offer a better base to someone who helps the doc enhanced. Of course, in the case you agree with this modification.. I did my best to keep meaningful original contents as much as possible. Give your opinion, please. Thanks, Byungchul > Thanks, > Byungchul > > On Sat, Nov 11, 2017 at 10:33:34PM +0900, Byungchul Park wrote: > > Revise Documentation/locking/crossrelease.txt to improve its readability. > > > > Signed-off-by: Byungchul Park <byungchul.park@xxxxxxx> > > --- > > Documentation/locking/crossrelease.txt | 329 ++++++++++++++++----------------- > > 1 file changed, 155 insertions(+), 174 deletions(-) > > > > diff --git a/Documentation/locking/crossrelease.txt b/Documentation/locking/crossrelease.txt > > index bdf1423..c6d628b 100644 > > --- a/Documentation/locking/crossrelease.txt > > +++ b/Documentation/locking/crossrelease.txt > > @@ -12,10 +12,10 @@ Contents: > > > > (*) Limitation > > > > - - Limit lockdep > > + - Limiting lockdep > > - Pros from the limitation > > - Cons from the limitation > > - - Relax the limitation > > + - Relaxing the limitation > > > > (*) Crossrelease > > > > @@ -30,9 +30,9 @@ Contents: > > (*) Optimizations > > > > - Avoid duplication > > - - Lockless for hot paths > > + - Make hot paths lockless > > > > - (*) APPENDIX A: What lockdep does to work aggresively > > + (*) APPENDIX A: What lockdep does to work aggressively > > > > (*) APPENDIX B: How to avoid adding false dependencies > > > > @@ -55,21 +55,21 @@ For example: > > A context going to trigger event A is waiting for event B to happen. > > A context going to trigger event B is waiting for event C to happen. > > > > -A deadlock occurs when these three wait operations run at the same time, > > +A deadlock occurs when these three waiters run at the same time, > > because event C cannot be triggered if event A does not happen, which in > > turn cannot be triggered if event B does not happen, which in turn > > cannot be triggered if event C does not happen. After all, no event can > > be triggered since any of them never meets its condition to wake up. > > > > -A dependency might exist between two waiters and a deadlock might happen > > -due to an incorrect releationship between dependencies. Thus, we must > > -define what a dependency is first. A dependency exists between them if: > > +A dependency might exist between two waiters and a deadlock happens due > > +to an incorrect relationship between dependencies. Thus, we must define > > +what a dependency is first. A dependency exists if: > > > > 1. There are two waiters waiting for each event at a given time. > > 2. The only way to wake up each waiter is to trigger its event. > > 3. Whether one can be woken up depends on whether the other can. > > > > -Each wait in the example creates its dependency like: > > +Each waiter in the example creates its dependency like: > > > > Event C depends on event A. > > Event A depends on event B. > > @@ -77,7 +77,7 @@ Each wait in the example creates its dependency like: > > > > NOTE: Precisely speaking, a dependency is one between whether a > > waiter for an event can be woken up and whether another waiter for > > - another event can be woken up. However from now on, we will describe > > + another event can be woken up. However, from now on, we will describe > > a dependency as if it's one between an event and another event for > > simplicity. > > > > @@ -109,9 +109,9 @@ event in the previous section. > > In short, lockdep does: > > > > 1. Detect a new dependency. > > - 2. Add the dependency into a global graph. > > + 2. Add the dependency to a global graph. > > 3. Check if that makes dependencies circular. > > - 4. Report a deadlock or its possibility if so. > > + 4. Report the deadlock or its possibility if so. > > > > For example, consider a graph built by lockdep that looks like: > > > > @@ -123,7 +123,7 @@ For example, consider a graph built by lockdep that looks like: > > > > where A, B,..., E are different lock classes. > > > > -Lockdep will add a dependency into the graph on detection of a new > > +Lockdep will add a dependency to the graph on detection of a new > > dependency. For example, it will add a dependency 'E -> C' when a new > > dependency between lock E and lock C is detected. Then the graph will be: > > > > @@ -147,7 +147,7 @@ This graph contains a subgraph which demonstrates circular dependencies: > > \ / > > ------------------ > > > > - where C, D and E are different lock classes. > > + where C, D, and E are different lock classes. > > > > This is the condition under which a deadlock might occur. Lockdep > > reports it on detection after adding a new dependency. This is the way > > @@ -163,13 +163,13 @@ dependencies were created after adding each new dependency. > > Limitation > > ========== > > > > -Limit lockdep > > -------------- > > +Limiting lockdep > > +---------------- > > > > Limiting lockdep to work on only typical locks e.g. spin locks and > > -mutexes, which are released within the acquire context, the > > +mutexes, which are released within their acquire contexts, the > > implementation becomes simple but its capacity for detection becomes > > -limited. Let's check pros and cons in next section. > > +limited. Let's check pros and cons in the next two sections. > > > > > > Pros from the limitation > > @@ -179,7 +179,7 @@ Given the limitation, when acquiring a lock, locks in a held_locks > > cannot be released if the context cannot acquire it so has to wait to > > acquire it, which means all waiters for the locks in the held_locks are > > stuck. It's an exact case to create dependencies between each lock in > > -the held_locks and the lock to acquire. > > +the held_locks and the lock to acquire at the moment. > > > > For example: > > > > @@ -195,22 +195,22 @@ For example: > > When acquiring lock A, the held_locks of CONTEXT X is empty thus no > > dependency is added. But when acquiring lock B, lockdep detects and adds > > a new dependency 'A -> B' between lock A in the held_locks and lock B. > > -They can be simply added whenever acquiring each lock. > > +Dependencies can be simply added this way, whenever acquiring each lock. > > > > -And data required by lockdep exists in a local structure, held_locks > > -embedded in task_struct. Forcing to access the data within the context, > > -lockdep can avoid racy problems without explicit locks while handling > > -the local data. > > +Furthermore, since data required to create a dependency can be kept in > > +local task_struct, lockdep can avoid racy problems without explicit > > +protection by forcing to access the data within the context. > > > > Lastly, lockdep only needs to keep locks currently being held, to build > > -a dependency graph. However, relaxing the limitation, it needs to keep > > -even locks already released, because a decision whether they created > > +the dependency graph. However, relaxing the limitation, it needs to keep > > +even locks already released, because the decision whether they created > > dependencies might be long-deferred. > > > > To sum up, we can expect several advantages from the limitation: > > > > 1. Lockdep can easily identify a dependency when acquiring a lock. > > - 2. Races are avoidable while accessing local locks in a held_locks. > > + 2. Races are avoidable without explicit protection while accessing > > + local locks in a held_locks. > > 3. Lockdep only needs to keep locks currently being held. > > > > CONCLUSION > > @@ -265,8 +265,8 @@ Given the limitation, lockdep cannot detect a deadlock or its > > possibility caused by page locks or completions. > > > > > > -Relax the limitation > > --------------------- > > +Relaxing the limitation > > +----------------------- > > > > Under the limitation, things to create dependencies are limited to > > typical locks. However, synchronization primitives like page locks and > > @@ -278,37 +278,36 @@ these locks to work with lockdep. > > Detecting dependencies is very important for lockdep to work because > > adding a dependency means adding an opportunity to check whether it > > causes a deadlock. The more lockdep adds dependencies, the more it > > -thoroughly works. Thus Lockdep has to do its best to detect and add as > > -many true dependencies into a graph as possible. > > +thoroughly works. Thus, lockdep has to do its best to detect and add as > > +many true dependencies to the graph as possible. > > > > -For example, considering only typical locks, lockdep builds a graph like: > > +For example: > > > > - A -> B - > > - \ > > - -> E > > - / > > - C -> D - > > + CONTEXT X CONTEXT Y > > + --------- --------- > > + acquire A > > + acquire B /* A dependency 'A -> B' exists */ > > + release B > > + release A held by Y > > > > - where A, B,..., E are different lock classes. > > + where A and B are different lock classes. > > > > -On the other hand, under the relaxation, additional dependencies might > > -be created and added. Assuming additional 'FX -> C' and 'E -> GX' are > > -added thanks to the relaxation, the graph will be: > > +In this case, a dependency 'A -> B' exists since: > > > > - A -> B - > > - \ > > - -> E -> GX > > - / > > - FX -> C -> D - > > + 1. A waiter for A and a waiter for B might exist when acquiring B. > > + 2. The only way to wake up each is to release what it waits for. > > + 3. Whether the waiter for A can be woken up depends on whether the > > + other can. In other words, CONTEXT X cannot release A if it fails > > + to acquire B. > > > > - where A, B,..., E, FX and GX are different lock classes, and a suffix > > - 'X' is added on non-typical locks. > > +Considering only typical locks, lockdep builds nothing. However, > > +relaxing the limitation, a dependency 'A -> B' can be added, giving us > > +more chances to check circular dependencies. > > > > -The latter graph gives us more chances to check circular dependencies > > -than the former. However, it might suffer performance degradation since > > -relaxing the limitation, with which design and implementation of lockdep > > -can be efficient, might introduce inefficiency inevitably. So lockdep > > -should provide two options, strong detection and efficient detection. > > +However, it might suffer performance degradation since relaxing the > > +limitation, with which design and implementation of lockdep can be > > +efficient, might introduce inefficiency inevitably. So lockdep should > > +provide two options, strong detection and efficient detection. > > > > Choosing efficient detection: > > > > @@ -336,27 +335,27 @@ Introduce crossrelease > > In order to allow lockdep to handle additional dependencies by what > > might be released in any context, namely 'crosslock', we have to be able > > to identify those created by crosslocks. The proposed 'crossrelease' > > -feature provoides a way to do that. > > +feature provides a way to do that. > > > > Crossrelease feature has to do: > > > > 1. Identify dependencies created by crosslocks. > > - 2. Add the dependencies into a dependency graph. > > + 2. Add the dependencies to the dependency graph. > > > > -That's all. Once a meaningful dependency is added into graph, then > > +That's all. Once a meaningful dependency is added to the graph, then > > lockdep would work with the graph as it did. The most important thing > > crossrelease feature has to do is to correctly identify and add true > > -dependencies into the global graph. > > +dependencies to the global graph. > > > > A dependency e.g. 'A -> B' can be identified only in the A's release > > context because a decision required to identify the dependency can be > > made only in the release context. That is to decide whether A can be > > -released so that a waiter for A can be woken up. It cannot be made in > > +released so that waiters for A can be woken up. That cannot be made in > > other than the A's release context. > > > > It's no matter for typical locks because each acquire context is same as > > its release context, thus lockdep can decide whether a lock can be > > -released in the acquire context. However for crosslocks, lockdep cannot > > +released in the acquire context. However, for crosslocks, lockdep cannot > > make the decision in the acquire context but has to wait until the > > release context is identified. > > > > @@ -375,10 +374,11 @@ Introduce commit > > ---------------- > > > > Since crossrelease defers the work adding true dependencies of > > -crosslocks until they are actually released, crossrelease has to queue > > +crosslocks until they are eventually released, crossrelease has to queue > > all acquisitions which might create dependencies with the crosslocks. > > -Then it identifies dependencies using the queued data in batches at a > > -proper time. We call it 'commit'. > > +Then lockdep can identify dependencies using the queued data in batches > > +at a proper time. We call the step adding true dependencies to the graph > > +in batches, 'commit'. > > > > There are four types of dependencies: > > > > @@ -404,10 +404,10 @@ There are four types of dependencies: > > > > When acquiring BX, lockdep cannot identify the dependency because > > there's no way to know if it's in the AX's release context. It has > > - to wait until the decision can be made. Commit is necessary. > > - But, handling CC type is not implemented yet. It's a future work. > > + to wait until the decision can be made. Commit is necessary. But, > > + handling CC type is not implemented yet. It's a future work. > > > > -Lockdep can work without commit for typical locks, but commit step is > > +Lockdep can work without commit for typical locks, but the step is > > necessary once crosslocks are involved. Introducing commit, lockdep > > performs three steps. What lockdep does in each step is: > > > > @@ -416,7 +416,7 @@ performs three steps. What lockdep does in each step is: > > it at the commit step. For crosslocks, it saves data which will be > > used at the commit step and increases a reference count for it. > > > > -2. Commit: No action is reauired for typical locks. For crosslocks, > > +2. Commit: No action is required for typical locks. For crosslocks, > > lockdep adds CT type dependencies using the data saved at the > > acquisition step. > > > > @@ -442,9 +442,9 @@ Crossrelease introduces two main data structures. > > > > This is an array embedded in task_struct, for keeping lock history so > > that dependencies can be added using them at the commit step. Since > > - it's local data, it can be accessed locklessly in the owner context. > > - The array is filled at the acquisition step and consumed at the > > - commit step. And it's managed in circular manner. > > + they are local data, they can be accessed locklessly in the owner > > + context. The array is filled at the acquisition step and consumed at > > + the commit step. And it's managed in a circular manner. > > > > 2. cross_lock > > > > @@ -456,29 +456,24 @@ How crossrelease works > > ---------------------- > > > > It's the key of how crossrelease works, to defer necessary works to an > > -appropriate point in time and perform in at once at the commit step. > > -Let's take a look with examples step by step, starting from how lockdep > > -works without crossrelease for typical locks. > > +appropriate point in time and perform the works at the commit step. > > + > > +Let's take a look at examples step by step, starting from how lockdep > > +works for typical locks, without crossrelease. > > > > - acquire A /* Push A onto held_locks */ > > - acquire B /* Push B onto held_locks and add 'A -> B' */ > > - acquire C /* Push C onto held_locks and add 'B -> C' */ > > + acquire A /* Push A to held_locks */ > > + acquire B /* Push B to held_locks and add 'A -> B' */ > > + acquire C /* Push C to held_locks and add 'B -> C' */ > > release C /* Pop C from held_locks */ > > release B /* Pop B from held_locks */ > > release A /* Pop A from held_locks */ > > > > - where A, B and C are different lock classes. > > + where A, B, and C are different lock classes. > > > > - NOTE: This document assumes that readers already understand how > > - lockdep works without crossrelease thus omits details. But there's > > - one thing to note. Lockdep pretends to pop a lock from held_locks > > - when releasing it. But it's subtly different from the original pop > > - operation because lockdep allows other than the top to be poped. > > +Lockdep adds 'the top of held_locks -> the lock to acquire' dependency > > +every time acquiring a lock. > > > > -In this case, lockdep adds 'the top of held_locks -> the lock to acquire' > > -dependency every time acquiring a lock. > > - > > -After adding 'A -> B', a dependency graph will be: > > +After adding 'A -> B', the dependency graph will be: > > > > A -> B > > > > @@ -488,15 +483,15 @@ And after adding 'B -> C', the graph will be: > > > > A -> B -> C > > > > - where A, B and C are different lock classes. > > + where A, B, and C are different lock classes. > > > > -Let's performs commit step even for typical locks to add dependencies. > > -Of course, commit step is not necessary for them, however, it would work > > -well because this is a more general way. > > +Let's build the graph using the commit step with the same example. Of > > +course, the step is not necessary for typical locks, however, it would > > +also work because this is a more general way. > > > > acquire A > > /* > > - * Queue A into hist_locks > > + * Queue A in hist_locks > > * > > * In hist_locks: A > > * In graph: Empty > > @@ -504,7 +499,7 @@ well because this is a more general way. > > > > acquire B > > /* > > - * Queue B into hist_locks > > + * Queue B in hist_locks > > * > > * In hist_locks: A, B > > * In graph: Empty > > @@ -512,7 +507,7 @@ well because this is a more general way. > > > > acquire C > > /* > > - * Queue C into hist_locks > > + * Queue C in hist_locks > > * > > * In hist_locks: A, B, C > > * In graph: Empty > > @@ -554,34 +549,32 @@ well because this is a more general way. > > > > release A > > > > - where A, B and C are different lock classes. > > - > > -In this case, dependencies are added at the commit step as described. > > + where A, B, and C are different lock classes. > > > > -After commits for A, B and C, the graph will be: > > +Dependencies are added at the commit step as described. After commits > > +for A, B, and C, the graph will be: > > > > A -> B -> C > > > > - where A, B and C are different lock classes. > > + where A, B, and C are different lock classes. > > > > NOTE: A dependency 'A -> C' is optimized out. > > > > -We can see the former graph built without commit step is same as the > > -latter graph built using commit steps. Of course the former way leads to > > -earlier finish for building the graph, which means we can detect a > > -deadlock or its possibility sooner. So the former way would be prefered > > -when possible. But we cannot avoid using the latter way for crosslocks. > > +We can see the former graph built without the commit step is same as the > > +latter graph. Of course, the former way leads to earlier finish for > > +building the graph, which means we can detect a deadlock or its > > +possibility sooner. So the former way would be preferred when possible. > > +But we cannot avoid using the latter way for crosslocks. > > > > -Let's look at how commit steps work for crosslocks. In this case, the > > -commit step is performed only on crosslock AX as real. And it assumes > > -that the AX release context is different from the AX acquire context. > > +Lastly, let's look at how commit works for crosslocks in practice. > > > > BX RELEASE CONTEXT BX ACQUIRE CONTEXT > > ------------------ ------------------ > > acquire A > > /* > > - * Push A onto held_locks > > - * Queue A into hist_locks > > + * Add 'the top of held_locks -> A' > > + * Push A to held_locks > > + * Queue A in hist_locks > > * > > * In held_locks: A > > * In hist_locks: A > > @@ -604,8 +597,9 @@ that the AX release context is different from the AX acquire context. > > > > acquire C > > /* > > - * Push C onto held_locks > > - * Queue C into hist_locks > > + * Add 'the top of held_locks -> C' > > + * Push C to held_locks > > + * Queue C in hist_locks > > * > > * In held_locks: C > > * In hist_locks: C > > @@ -622,9 +616,9 @@ that the AX release context is different from the AX acquire context. > > */ > > acquire D > > /* > > - * Push D onto held_locks > > - * Queue D into hist_locks > > * Add 'the top of held_locks -> D' > > + * Push D to held_locks > > + * Queue D in hist_locks > > * > > * In held_locks: A, D > > * In hist_locks: A, D > > @@ -632,8 +626,9 @@ that the AX release context is different from the AX acquire context. > > */ > > acquire E > > /* > > - * Push E onto held_locks > > - * Queue E into hist_locks > > + * Add 'the top of held_locks -> E' > > + * Push E to held_locks > > + * Queue E in hist_locks > > * > > * In held_locks: E > > * In hist_locks: C, E > > @@ -659,6 +654,7 @@ that the AX release context is different from the AX acquire context. > > commit BX > > /* > > * Add 'BX -> ?' > > + * Answer the following to decide '?' > > * What has been queued since acquire BX: C, E > > * > > * In held_locks: Empty > > @@ -684,15 +680,15 @@ that the AX release context is different from the AX acquire context. > > * 'BX -> C', 'BX -> E' > > */ > > > > - where A, BX, C,..., E are different lock classes, and a suffix 'X' is > > - added on crosslocks. > > + where A, BX, C,..., E are different lock classes and a suffix 'X' is > > + added at crosslocks. > > > > -Crossrelease considers all acquisitions after acqiuring BX are > > -candidates which might create dependencies with BX. True dependencies > > -will be determined when identifying the release context of BX. Meanwhile, > > -all typical locks are queued so that they can be used at the commit step. > > -And then two dependencies 'BX -> C' and 'BX -> E' are added at the > > -commit step when identifying the release context. > > +Crossrelease considers all acquisitions following acquiring BX because > > +they can create dependencies with BX. The dependencies will be > > +determined in the release context of BX. Meanwhile, all typical locks > > +are queued so that they can be used at the commit step. Finally, two > > +dependencies 'BX -> C' and 'BX -> E' will be added at the commit step, > > +when identifying the release context. > > > > The final graph will be, with crossrelease: > > > > @@ -704,8 +700,8 @@ The final graph will be, with crossrelease: > > \ > > -> D > > > > - where A, BX, C,..., E are different lock classes, and a suffix 'X' is > > - added on crosslocks. > > + where A, BX, C,..., E are different lock classes and a suffix 'X' is > > + added at crosslocks. > > > > However, the final graph will be, without crossrelease: > > > > @@ -732,39 +728,40 @@ Avoid duplication > > > > Crossrelease feature uses a cache like what lockdep already uses for > > dependency chains, but this time it's for caching CT type dependencies. > > -Once that dependency is cached, the same will never be added again. > > +Once a dependency is cached, the same will never be added again. > > > > > > -Lockless for hot paths > > ----------------------- > > +Make hot paths lockless > > +----------------------- > > > > To keep all locks for later use at the commit step, crossrelease adopts > > -a local array embedded in task_struct, which makes access to the data > > -lockless by forcing it to happen only within the owner context. It's > > -like how lockdep handles held_locks. Lockless implmentation is important > > -since typical locks are very frequently acquired and released. > > +a local array embedded in task_struct, which makes the data locklessly > > +accessible by forcing it to happen only within the owner context. It's > > +like how lockdep handles held_locks. Lockless implementation is > > +important since typical locks are very frequently acquired and released. > > > > > > ================================================= > > APPENDIX A: What lockdep does to work aggresively > > ================================================= > > > > -A deadlock actually occurs when all wait operations creating circular > > +A deadlock actually occurs when all waiters creating circular > > dependencies run at the same time. Even though they don't, a potential > > -deadlock exists if the problematic dependencies exist. Thus it's > > +deadlock exists if the problematic dependencies exist. Thus, it's > > meaningful to detect not only an actual deadlock but also its potential > > -possibility. The latter is rather valuable. When a deadlock occurs > > -actually, we can identify what happens in the system by some means or > > -other even without lockdep. However, there's no way to detect possiblity > > -without lockdep unless the whole code is parsed in head. It's terrible. > > -Lockdep does the both, and crossrelease only focuses on the latter. > > +possibility. The latter is rather valuable. When a deadlock actually > > +occurs, we can identify what happens in the system by some means or > > +other even without lockdep. However, there's no way to detect a > > +possibility without lockdep, unless the whole code is parsed in the head. > > +It's terrible. Lockdep does the both, and crossrelease only focuses on > > +the latter. > > > > Whether or not a deadlock actually occurs depends on several factors. > > For example, what order contexts are switched in is a factor. Assuming > > circular dependencies exist, a deadlock would occur when contexts are > > -switched so that all wait operations creating the dependencies run > > -simultaneously. Thus to detect a deadlock possibility even in the case > > -that it has not occured yet, lockdep should consider all possible > > +switched so that all waiters creating the dependencies run > > +simultaneously. Thus, to detect a deadlock possibility even in the case > > +that it has not occurred yet, lockdep should consider all possible > > combinations of dependencies, trying to: > > > > 1. Use a global dependency graph. > > @@ -776,7 +773,7 @@ combinations of dependencies, trying to: > > > > 2. Check dependencies between classes instead of instances. > > > > - What actually causes a deadlock are instances of lock. However, > > + What actually causes a deadlock are instances of locks. However, > > lockdep checks dependencies between classes instead of instances. > > This way lockdep can detect a deadlock which has not happened but > > might happen in future by others but the same class. > > @@ -805,44 +802,28 @@ Remind what a dependency is. A dependency exists if: > > > > For example: > > > > - acquire A > > - acquire B /* A dependency 'A -> B' exists */ > > - release B > > - release A > > - > > - where A and B are different lock classes. > > - > > -A depedency 'A -> B' exists since: > > - > > - 1. A waiter for A and a waiter for B might exist when acquiring B. > > - 2. Only way to wake up each is to release what it waits for. > > - 3. Whether the waiter for A can be woken up depends on whether the > > - other can. IOW, TASK X cannot release A if it fails to acquire B. > > - > > -For another example: > > - > > - TASK X TASK Y > > - ------ ------ > > + CONTEXT X CONTEXT Y > > + --------- --------- > > acquire AX > > acquire B /* A dependency 'AX -> B' exists */ > > release B > > release AX held by Y > > > > - where AX and B are different lock classes, and a suffix 'X' is added > > - on crosslocks. > > + where AX and B are different lock classes and a suffix 'X' is added > > + at crosslocks. > > > > -Even in this case involving crosslocks, the same rule can be applied. A > > -depedency 'AX -> B' exists since: > > +Here, a dependency 'AX -> B' exists since: > > > > 1. A waiter for AX and a waiter for B might exist when acquiring B. > > - 2. Only way to wake up each is to release what it waits for. > > + 2. The only way to wake up each is to release what it waits for. > > 3. Whether the waiter for AX can be woken up depends on whether the > > - other can. IOW, TASK X cannot release AX if it fails to acquire B. > > + other can. In other words, CONTEXT X cannot release AX if it fails > > + to acquire B. > > > > -Let's take a look at more complicated example: > > +Let's take a look at a more complicated example: > > > > - TASK X TASK Y > > - ------ ------ > > + CONTEXT X CONTEXT Y > > + --------- --------- > > acquire B > > release B > > fork Y > > @@ -851,22 +832,22 @@ Let's take a look at more complicated example: > > release C > > release AX held by Y > > > > - where AX, B and C are different lock classes, and a suffix 'X' is > > - added on crosslocks. > > + where AX, B, and C are different lock classes and a suffix 'X' is > > + added at crosslocks. > > > > Does a dependency 'AX -> B' exist? Nope. > > > > Two waiters are essential to create a dependency. However, waiters for > > AX and B to create 'AX -> B' cannot exist at the same time in this > > -example. Thus the dependency 'AX -> B' cannot be created. > > +example. Thus, the dependency 'AX -> B' cannot be created. > > > > It would be ideal if the full set of true ones can be considered. But > > we can ensure nothing but what actually happened. Relying on what > > actually happens at runtime, we can anyway add only true ones, though > > they might be a subset of true ones. It's similar to how lockdep works > > -for typical locks. There might be more true dependencies than what > > -lockdep has detected in runtime. Lockdep has no choice but to rely on > > -what actually happens. Crossrelease also relies on it. > > +for typical locks. There might be more true dependencies than lockdep > > +has detected. Lockdep has no choice but to rely on what actually happens. > > +Crossrelease also relies on it. > > > > CONCLUSION > > > > -- > > 1.9.1 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@xxxxxxxxx. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
