Re: [PATCH 0/6] Boot-time switching between 4- and 5-level paging for 4.15, Part 1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 26, 2017 at 09:37:52AM +0200, Ingo Molnar wrote:
> 
> * Kirill A. Shutemov <kirill@xxxxxxxxxxxxx> wrote:
> 
> > On Tue, Oct 24, 2017 at 02:47:41PM +0200, Ingo Molnar wrote:
> > > > > > > > > Making a variable that 'looks' like a constant macro dynamic in a rare Kconfig 
> > > > > > > > > scenario is asking for trouble.
> > > > > > > > 
> > > > > > > > We expect boot-time page mode switching to be enabled in kernel of next
> > > > > > > > generation enterprise distros. It shoudn't be that rare.
> > > > > > > 
> > > > > > > My point remains even with not-so-rare Kconfig dependency.
> > > > > > 
> > > > > > I don't follow how introducing new variable that depends on Kconfig option
> > > > > > would help with the situation.
> > > > > 
> > > > > A new, properly named variable or function (max_physmem_bits or 
> > > > > max_physmem_bits()) that is not all uppercase would make it abundantly clear that 
> > > > > it is not a constant but a runtime value.
> > > > 
> > > > Would we need to rename every uppercase macros that would depend on
> > > > max_physmem_bits()? Like MAXMEM.
> > > 
> > > MAXMEM isn't used in too many places either - what's the total impact of it?
> > 
> > The impact is not very small. The tree of macros dependent on
> > MAX_PHYSMEM_BITS:
> > 
> > MAX_PHYSMEM_BITS
> >   MAXMEM
> >     KEXEC_SOURCE_MEMORY_LIMIT
> >     KEXEC_DESTINATION_MEMORY_LIMIT
> >     KEXEC_CONTROL_MEMORY_LIMIT
> >   SECTIONS_SHIFT
> >     ZONEID_SHIFT
> >       ZONEID_PGSHIFT
> >       ZONEID_MASK
> > 
> > The total number of users of them is not large. It's doable. But I expect
> > it to be somewhat ugly, since we're partly in generic code and it would
> > require some kind of compatibility layer for other archtectures.
> > 
> > Do you want me to rename them all?
> 
> Yeah, I think these former constants should be organized better.
> 
> Here's their usage frequency:
> 
>  triton:~/tip> for N in MAX_PHYSMEM_BITS MAXMEM KEXEC_SOURCE_MEMORY_LIMIT \
>  KEXEC_DESTINATION_MEMORY_LIMIT KEXEC_CONTROL_MEMORY_LIMIT SECTIONS_SHIFT \
>  ZONEID_SHIFT ZONEID_PGSHIFT ZONEID_MASK; do printf "  %-40s: " $N; git grep -w $N  | grep -vE 'define| \* ' | wc -l; done
> 
>    MAX_PHYSMEM_BITS                        : 10
>    MAXMEM                                  : 5
>    KEXEC_SOURCE_MEMORY_LIMIT               : 2
>    KEXEC_DESTINATION_MEMORY_LIMIT          : 2
>    KEXEC_CONTROL_MEMORY_LIMIT              : 2
>    SECTIONS_SHIFT                          : 2
>    ZONEID_SHIFT                            : 1
>    ZONEID_PGSHIFT                          : 1
>    ZONEID_MASK                             : 1
> 
> So it's not too bad to clean up, I think.
> 
> How about something like this:
> 
> 	machine.physmem.max_bytes		/* ex MAXMEM */
> 	machine.physmem.max_bits		/* bit count of the highest in-use physical address */
> 	machine.physmem.zones.id_shift		/* ZONEID_SHIFT */
> 	machine.physmem.zones.pg_shift		/* ZONEID_PGSHIFT */
> 	machine.physmem.zones.id_mask		/* ZONEID_MASK */
> 
> 	machine.kexec.physmem_bytes_src		/* KEXEC_SOURCE_MEMORY_LIMIT */
> 	machine.kexec.physmem_bytes_dst		/* KEXEC_DESTINATION_MEMORY_LIMIT */
> 
> ( With perhaps 'physmem' being an alias to '&machine->physmem', so that 
>   physmem->max_bytes and physmem->max_bits would be a natural thing to write. )
> 
> I'd suggest doing this in a finegrained fashion, one step at a time, introducing 
> 'struct machine' and 'struct physmem' and extending it gradually with new fields.

I don't think this design is reasonable.

  - It introduces memory references where we haven't had them before.

    At this point all variable would fit a cache line, which is not that
    bad. But I don't see what would stop the list from growing in the
    future.

  - We loose ability to optimize out change with static branches
    (cpu_feature_enabled() instead of pgtable_l5_enabled variable).

    It's probably, not that big of an issue here, but if we are going to
    use the same approach for other dynamic macros in the patchset, it
    might be.

  - AFAICS, it requires changes to all architectures to provide such
    structures as we now partly in generic code.

    Or to introduce some kind of compatibility layer, but it would make
    the kernel as a whole uglier than cleaner. Especially, given that
    nobody beyond x86 need this.

To me it's pretty poor trade off for a clean up.

> To re-discuss the virt_addr_valid() concern you raised:
> 
> > > For instance, virt_addr_valid() depends indirectly on it:
> > > 
> > >   virt_addr_valid()
> > >     __virt_addr_valid()
> > >       phys_addr_valid()
> > >         boot_cpu_data.x86_phys_bits (initialized with MAX_PHYSMEM_BITS)
> > > 
> > > virt_addr_valid() is used in things like implementation /dev/kmem.
> > > 
> > > To me it's far more risky than occasional build breakage for
> > > CONFIG_X86_5LEVEL=y.
> > 
> > So why do we have two variables here, one boot_cpu_data.x86_phys_bits and the
> > other MAX_PHYSMEM_BITS - both set once during boot?
> 
> So it's still unclear to me why virt_addr_valid() would be a problem: this 
> function could probably (in a separate patch) use physmem->max_bits, which would 
> make it more secure than using even a dynamic MAX_PHYSMEM_BITS: it would detect 
> any physical addresses that are beyond the recognized maximum range.

Here we discussed what would happen if we leave MAX_PHYSMEM_BITS as a
constant -- maximum possible physmem bits, regardless of paging mode --
and introduce new variable that would reflect the actual maximum.

And this was example for the case that may misbehave (not only bloat a
data structure) if we would forget to change MAX_PHYSMEM_BITS to a
new variable.

-- 
 Kirill A. Shutemov

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]
  Powered by Linux