From: Josef Bacik <jbacik@xxxxxx>
While testing slab reclaim I noticed that if we were running a workload
that used most of the system memory for it's working set and we start
putting a lot of reclaimable slab pressure on the system (think find /,
or some other silliness), we will happily evict the active pages over
the slab cache. This is kind of backwards as we want to do all that we
can to keep the active working set in memory, and instead evict these
short lived objects. The same thing occurs when say you do a yum
update of a few packages while your working set takes up most of RAM,
you end up with inactive lists being relatively small and so we reclaim
active pages even though we could reclaim these short lived inactive
pages.
My approach here is twofold. First, keep track of the difference in
inactive and slab pages since the last time kswapd ran. In the first
run this will just be the overall counts of inactive and slab, but for
each subsequent run we'll have a good idea of where the memory pressure
is coming from. Then we use this information to put pressure on either
the inactive lists or the slab caches, depending on where the pressure
is coming from.
If this optimization does not work, then we fall back to the previous
methods of reclaiming space with a slight adjustment. Instead of using
the overall scan rate of page cache to determine the scan rate for slab,
we instead use the total usage of slab compared to the reclaimable page
cache on the box. This will allow us to put an appropriate amount of
pressure on the slab shrinkers if we are a mostly slab workload.
I have two tests I was using to watch either side of this problem. The
first test kept 2 files that took up 3/4 of the memory, and then started
creating a bunch of empty files. Without this patch we would have to
re-read both files in their entirety at least 3 times during the run.
With this patch the active pages are never evicted.
The second test was a test that would read and stat all the files in a
directory, which again would take up about 3/4 of the memory with slab
cache. Then I cat'ed a 100gib file into /dev/null and checked to see if
any of the files were evicted and verified that none of the files were
evicted.
Signed-off-by: Josef Bacik <jbacik@xxxxxx>
---
mm/vmscan.c | 170 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 156 insertions(+), 14 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index f2b9a65..2f36e54 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -110,11 +110,20 @@ struct scan_control {
/* One of the zones is ready for compaction */
unsigned int compaction_ready:1;
+ /* Only reclaim inactive page cache or slab. */
+ unsigned int inactive_only:1;
+
/* Incremented by the number of inactive pages that were scanned */
unsigned long nr_scanned;
/* Number of pages freed so far during a call to shrink_zones() */
unsigned long nr_reclaimed;
+
+ /* Number of inactive pages added since last kswapd run. */
+ unsigned long inactive_diff;
+
+ /* Number of slab pages added since last kswapd run. */
+ unsigned long slab_diff;
};
#ifdef ARCH_HAS_PREFETCH
@@ -309,7 +318,8 @@ static unsigned long do_shrink_slab(struct scan_control *sc,
struct shrink_control *shrinkctl,
struct shrinker *shrinker,
unsigned long numerator,
- unsigned long denominator)
+ unsigned long denominator,
+ unsigned long *slab_scanned)
{
struct reclaim_state *reclaim_state = current->reclaim_state;
unsigned long freed = 0;
@@ -415,6 +425,9 @@ static unsigned long do_shrink_slab(struct scan_control *sc,
next_deferred -= scanned;
else
next_deferred = 0;
+ if (slab_scanned)
+ (*slab_scanned) += scanned;
+
/*
* move the unused scan count back into the shrinker in a
* manner that handles concurrent updates. If we exhausted the
@@ -457,7 +470,8 @@ static unsigned long do_shrink_slab(struct scan_control *sc,
static unsigned long shrink_slab(struct scan_control *sc, int nid,
struct mem_cgroup *memcg,
unsigned long numerator,
- unsigned long denominator)
+ unsigned long denominator,
+ unsigned long *slab_scanned)
{
struct shrinker *shrinker;
unsigned long freed = 0;
@@ -496,7 +510,7 @@ static unsigned long shrink_slab(struct scan_control *sc, int nid,
shrinkctl.nid = 0;
freed += do_shrink_slab(sc, &shrinkctl, shrinker, numerator,
- denominator);
+ denominator, slab_scanned);
if (sc->nr_to_reclaim <= sc->nr_reclaimed)
break;
}
@@ -521,7 +535,7 @@ void drop_slab_node(int nid)
freed = 0;
do {
freed += shrink_slab(&sc, nid, memcg,
- 1000, 1000);
+ 1000, 1000, NULL);
} while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)) != NULL);
} while (freed > 10);
}
@@ -2152,6 +2166,7 @@ enum scan_balance {
SCAN_FRACT,
SCAN_ANON,
SCAN_FILE,
+ SCAN_INACTIVE,
};
/*
@@ -2178,6 +2193,11 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
unsigned long ap, fp;
enum lru_list lru;
+ if (sc->inactive_only) {
+ scan_balance = SCAN_INACTIVE;
+ goto out;
+ }
+
/* If we have no swap space, do not bother scanning anon pages. */
if (!sc->may_swap || mem_cgroup_get_nr_swap_pages(memcg) <= 0) {
scan_balance = SCAN_FILE;
@@ -2351,6 +2371,14 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
scan = 0;
}
break;
+ case SCAN_INACTIVE:
+ if (file && !is_active_lru(lru)) {
+ scan = max(scan, sc->nr_to_reclaim);
+ } else {
+ size = 0;
+ scan = 0;
+ }
+ break;
default:
/* Look ma, no brain */
BUG();
@@ -2586,13 +2614,60 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
.reclaimed_slab = 0,
};
unsigned long nr_reclaimed, nr_scanned;
- unsigned long greclaim = 1, gslab = 1;
+ unsigned long greclaim = 1, gslab = 1, total_high_wmark = 0, nr_inactive;
bool reclaimable = false;
+ bool skip_slab = false;
current->reclaim_state = &reclaim_state;
if (global_reclaim(sc)) {
+ int z;
+ for (z = 0; z < MAX_NR_ZONES; z++) {
+ struct zone *zone = &pgdat->node_zones[z];
+ if (!managed_zone(zone))
+ continue;
+ total_high_wmark += high_wmark_pages(zone);
+ }
+ nr_inactive = node_page_state(pgdat, NR_INACTIVE_FILE);
gslab = node_page_state(pgdat, NR_SLAB_RECLAIMABLE);
greclaim = pgdat_reclaimable_pages(pgdat);
+ } else {
+ struct lruvec *lruvec =
+ mem_cgroup_lruvec(pgdat, sc->target_mem_cgroup);
+ total_high_wmark = sc->nr_to_reclaim;
+ nr_inactive = lruvec_page_state(lruvec, NR_INACTIVE_FILE);
+ gslab = lruvec_page_state(lruvec, NR_SLAB_RECLAIMABLE);
+ }
+
+ /*
+ * If we don't have a lot of inactive or slab pages then there's no
+ * point in trying to free them exclusively, do the normal scan stuff.
+ */
+ if (nr_inactive + gslab < total_high_wmark)
+ sc->inactive_only = 0;
+
+ /*
+ * We still want to slightly prefer slab over inactive, so if the
+ * inactive on this node is large enough and what is pushing us into
+ * reclaim terretitory then limit our flushing to the inactive list for
+ * the first go around.
+ *
+ * The idea is that with a memcg configured system we will still reclaim
+ * memcg aware shrinkers, which includes the super block shrinkers. So
+ * if our steady state is keeping fs objects in cache for our workload
+ * we'll still put a certain amount of pressure on them anyway. To
+ * avoid evicting things we actually care about we want to skip slab
+ * reclaim altogether.
+ *
+ * However we still want to account for slab and inactive growing at the
+ * same rate, so if that is the case just carry on shrinking inactive
+ * and slab together.
+ */
+ if (nr_inactive > total_high_wmark &&
+ sc->inactive_diff > sc->slab_diff) {
+ unsigned long tmp = sc->inactive_diff >> 1;
+
+ if (tmp >= sc->slab_diff)
+ skip_slab = true;
}
do {
@@ -2602,6 +2677,8 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
.priority = sc->priority,
};
unsigned long node_lru_pages = 0;
+ unsigned long slab_reclaimed = 0;
+ unsigned long slab_scanned = 0;
struct mem_cgroup *memcg;
nr_reclaimed = sc->nr_reclaimed;
@@ -2633,9 +2710,18 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
shrink_node_memcg(pgdat, memcg, sc, &lru_pages);
node_lru_pages += lru_pages;
- if (memcg)
- shrink_slab(sc, pgdat->node_id, memcg, nr_slab,
- nr_reclaim);
+ if (memcg && !skip_slab) {
+ unsigned long numerator = nr_slab;
+ unsigned long denominator = nr_reclaim;
+ if (sc->inactive_only) {
+ numerator = sc->slab_diff;
+ denominator = sc->inactive_diff;
+ }
+ slab_reclaimed +=
+ shrink_slab(sc, pgdat->node_id, memcg,
+ numerator, denominator,
+ &slab_scanned);
+ }
/* Record the group's reclaim efficiency */
vmpressure(sc->gfp_mask, memcg, false,
@@ -2659,8 +2745,17 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
}
} while ((memcg = mem_cgroup_iter(root, memcg, &reclaim)));
- if (global_reclaim(sc))
- shrink_slab(sc, pgdat->node_id, NULL, gslab, greclaim);
+ if (!skip_slab && global_reclaim(sc)) {
+ unsigned long numerator = gslab;
+ unsigned long denominator = greclaim;
+ if (sc->inactive_only) {
+ numerator = sc->slab_diff;
+ denominator = sc->inactive_diff;
+ }
+ slab_reclaimed += shrink_slab(sc, pgdat->node_id, NULL,
+ numerator, denominator,
+ &slab_scanned);
+ }
/*
* Record the subtree's reclaim efficiency. The reclaimed
@@ -2677,9 +2772,28 @@ static bool shrink_node(pg_data_t *pgdat, struct scan_control *sc)
sc->nr_reclaimed += reclaim_state.reclaimed_slab;
reclaim_state.reclaimed_slab = 0;
- if (sc->nr_reclaimed - nr_reclaimed)
+ if (sc->nr_reclaimed - nr_reclaimed) {
reclaimable = true;
+ } else if (sc->inactive_only && !skip_slab) {
+ unsigned long percent = 0;
+ /*
+ * We didn't reclaim anything this go around, so the
+ * inactive list is likely spent. If we're reclaiming
+ * less than half of the objects in slab that we're
+ * scanning then just stop doing the inactive only scan.
+ * Otherwise ramp up the pressure on the slab caches
+ * hoping that eventually we'll start freeing enough
+ * objects to reclaim space.
+ */
+ if (slab_scanned)
+ percent = slab_reclaimed * 100 / slab_scanned;
+ if (percent < 50)
+ sc->inactive_only = 0;
+ else
+ gslab <<= 1;
+ }
+ skip_slab = false;
} while (should_continue_reclaim(pgdat, sc->nr_reclaimed - nr_reclaimed,
sc->nr_scanned - nr_scanned, sc));
@@ -3323,7 +3437,8 @@ static bool kswapd_shrink_node(pg_data_t *pgdat,
* or lower is eligible for reclaim until at least one usable zone is
* balanced.
*/
-static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
+static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx,
+ unsigned long inactive_diff, unsigned long slab_diff)
{
int i;
unsigned long nr_soft_reclaimed;
@@ -3336,6 +3451,9 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int classzone_idx)
.may_writepage = !laptop_mode,
.may_unmap = 1,
.may_swap = 1,
+ .inactive_only = 1,
+ .inactive_diff = inactive_diff,
+ .slab_diff = slab_diff,
};
count_vm_event(PAGEOUTRUN);
@@ -3555,7 +3673,7 @@ static int kswapd(void *p)
unsigned int classzone_idx = MAX_NR_ZONES - 1;
pg_data_t *pgdat = (pg_data_t*)p;
struct task_struct *tsk = current;
-
+ unsigned long nr_slab = 0, nr_inactive = 0;
const struct cpumask *cpumask = cpumask_of_node(pgdat->node_id);
lockdep_set_current_reclaim_state(GFP_KERNEL);
@@ -3581,6 +3699,7 @@ static int kswapd(void *p)
pgdat->kswapd_order = 0;
pgdat->kswapd_classzone_idx = MAX_NR_ZONES;
for ( ; ; ) {
+ unsigned long slab_diff, inactive_diff;
bool ret;
alloc_order = reclaim_order = pgdat->kswapd_order;
@@ -3608,6 +3727,23 @@ static int kswapd(void *p)
continue;
/*
+ * We want to know where we're adding pages so we can make
+ * smarter decisions about where we're going to put pressure
+ * when shrinking.
+ */
+ slab_diff = sum_zone_node_page_state(pgdat->node_id,
+ NR_SLAB_RECLAIMABLE);
+ inactive_diff = node_page_state(pgdat, NR_INACTIVE_FILE);
+ if (nr_slab > slab_diff)
+ slab_diff = 0;
+ else
+ slab_diff -= nr_slab;
+ if (inactive_diff < nr_inactive)
+ inactive_diff = 0;
+ else
+ inactive_diff -= nr_inactive;
+
+ /*
* Reclaim begins at the requested order but if a high-order
* reclaim fails then kswapd falls back to reclaiming for
* order-0. If that happens, kswapd will consider sleeping
@@ -3617,7 +3753,11 @@ static int kswapd(void *p)
*/
trace_mm_vmscan_kswapd_wake(pgdat->node_id, classzone_idx,
alloc_order);
- reclaim_order = balance_pgdat(pgdat, alloc_order, classzone_idx);
+ reclaim_order = balance_pgdat(pgdat, alloc_order, classzone_idx,
+ inactive_diff, slab_diff);
+ nr_inactive = node_page_state(pgdat, NR_INACTIVE_FILE);
+ nr_slab = sum_zone_node_page_state(pgdat->node_id,
+ NR_SLAB_RECLAIMABLE);
if (reclaim_order < alloc_order)
goto kswapd_try_sleep;
}
@@ -3862,6 +4002,8 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
.may_unmap = !!(node_reclaim_mode & RECLAIM_UNMAP),
.may_swap = 1,
.reclaim_idx = gfp_zone(gfp_mask),
+ .slab_diff = 1,
+ .inactive_diff = 1,
};
cond_resched();
--
2.7.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
