On Mon, Jun 12, 2017 at 08:42:13AM -0400, Jeff Layton wrote:
> Make a new btrfs/999 test that works the way Chris Mason suggested:
>
> Build a filesystem with 2 devices that stripes the data across
> both devices, but mirrors metadata across both. Then, make one
> of the devices fail and see how fsync is handled.
>
> Signed-off-by: Jeff Layton <jlayton@xxxxxxxxxx>
> ---
> tests/btrfs/999 | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
Missing btrfs/999.out file
> tests/btrfs/group | 1 +
> 2 files changed, 94 insertions(+)
> create mode 100755 tests/btrfs/999
>
> diff --git a/tests/btrfs/999 b/tests/btrfs/999
> new file mode 100755
> index 000000000000..84031cc0d913
> --- /dev/null
> +++ b/tests/btrfs/999
> @@ -0,0 +1,93 @@
> +#! /bin/bash
> +# FS QA Test No. 999
> +#
> +# Open a file several times, write to it, fsync on all fds and make sure that
> +# they all return 0. Change the device to start throwing errors. Write again
> +# on all fds and fsync on all fds. Ensure that we get errors on all of them.
> +# Then fsync on all one last time and verify that all return 0.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017, Jeff Layton <jlayton@xxxxxxxxxx>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -rf $tmp.* $testdir
> + _dmerror_cleanup
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/dmerror
> +
> +# real QA test starts here
> +_supported_os Linux
> +_require_dm_target error
> +_require_test_program fsync-err
> +_require_test_program dmerror
> +
> +# bring up dmerror device
> +_scratch_unmount
> +_dmerror_init
> +
> +# Replace first device with error-test device
> +old_SCRATCH_DEV=$SCRATCH_DEV
> +SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | perl -pe "s#$SCRATCH_DEV#$DMERROR_DEV#"`
> +SCRATCH_DEV=$DMERROR_DEV
> +
> +_require_scratch
> +_require_scratch_dev_pool
Need "_require_scratch_dev_pool_equal_size" too, since test creates
raid1 profile for metadata.
Thanks,
Eryu
> +
> +rm -f $seqres.full
> +
> +echo "Format and mount"
> +
> +_scratch_pool_mkfs "-d raid0 -m raid1" > $seqres.full 2>&1
> +_scratch_mount
> +
> +# How much do we need to write? We need to hit all of the stripes. btrfs uses
> +# a fixed 64k stripesize, so write enough to hit each one
> +number_of_devices=`echo $SCRATCH_DEV_POOL | wc -w`
> +write_kb=$(($number_of_devices * 64))
> +_require_fs_space $SCRATCH_MNT $write_kb
> +
> +testfile=$SCRATCH_MNT/fsync-err-test
> +
> +SCRATCH_DEV=$old_SCRATCH_DEV
> +$here/src/fsync-err -b $(($write_kb * 1024)) -d $here/src/dmerror $testfile
> +
> +# success, all done
> +_dmerror_load_working_table
> +
> +# fs may be corrupt after this -- attempt to repair it
> +_repair_scratch_fs >> $seqres.full
> +
> +# remove dmerror device
> +_dmerror_cleanup
> +
> +status=0
> +exit
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 6f19619e877c..8dbdfbfe29fd 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -145,3 +145,4 @@
> 141 auto quick
> 142 auto quick
> 143 auto quick
> +999 auto quick
> --
> 2.13.0
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
