On Mon, Jun 12, 2017 at 08:42:09AM -0400, Jeff Layton wrote:
> I'm working on a set of kernel patches to change how writeback errors
> are handled and reported in the kernel. Instead of reporting a
> writeback error to only the first fsync caller on the file, I aim
> to make the kernel report them once on every file description.
>
> This patch adds a test for the new behavior. Basically, open many fds
> to the same file, turn on dm_error, write to each of the fds, and then
> fsync them all to ensure that they all get an error back.
>
> To do that, I'm adding a new tools/dmerror script that the C program
> can use to load the error table. For now, that's all it can do, but
> we can fill it out with other commands as necessary.
>
> Signed-off-by: Jeff Layton <jlayton@xxxxxxxxxx>
> ---
> .gitignore | 1 +
> common/dmerror | 13 ++-
> doc/auxiliary-programs.txt | 16 ++++
> src/Makefile | 2 +-
> src/dmerror | 44 +++++++++
> src/fsync-err.c | 223 +++++++++++++++++++++++++++++++++++++++++++++
> tests/generic/999 | 77 ++++++++++++++++
> tests/generic/999.out | 3 +
> tests/generic/group | 1 +
> 9 files changed, 374 insertions(+), 6 deletions(-)
> create mode 100755 src/dmerror
> create mode 100644 src/fsync-err.c
> create mode 100755 tests/generic/999
> create mode 100644 tests/generic/999.out
>
> diff --git a/.gitignore b/.gitignore
> index 39664b0a7f53..56e863b2c8dc 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -72,6 +72,7 @@
> /src/fs_perms
> /src/fssum
> /src/fstest
> +/src/fsync-err
> /src/fsync-tester
> /src/ftrunc
> /src/genhashnames
> diff --git a/common/dmerror b/common/dmerror
> index d46c5d0b7266..238baa213b1f 100644
> --- a/common/dmerror
> +++ b/common/dmerror
> @@ -23,22 +23,25 @@ if [ $? -eq 0 ]; then
> _notrun "Cannot run tests with DAX on dmerror devices"
> fi
>
> -_dmerror_init()
> +_dmerror_setup()
> {
> local dm_backing_dev=$SCRATCH_DEV
>
> - $DMSETUP_PROG remove error-test > /dev/null 2>&1
> -
> local blk_dev_size=`blockdev --getsz $dm_backing_dev`
>
> DMERROR_DEV='/dev/mapper/error-test'
>
> DMLINEAR_TABLE="0 $blk_dev_size linear $dm_backing_dev 0"
>
> + DMERROR_TABLE="0 $blk_dev_size error $dm_backing_dev 0"
> +}
> +
> +_dmerror_init()
> +{
> + _dmerror_setup
> + $DMSETUP_PROG remove error-test > /dev/null 2>&1
> $DMSETUP_PROG create error-test --table "$DMLINEAR_TABLE" || \
> _fatal "failed to create dm linear device"
> -
> - DMERROR_TABLE="0 $blk_dev_size error $dm_backing_dev 0"
> }
>
> _dmerror_mount()
> diff --git a/doc/auxiliary-programs.txt b/doc/auxiliary-programs.txt
> index 21ef118596b6..bcab453c4335 100644
> --- a/doc/auxiliary-programs.txt
> +++ b/doc/auxiliary-programs.txt
> @@ -16,6 +16,8 @@ note the dependency with:
> Contents:
>
> - af_unix -- Create an AF_UNIX socket
> + - dmerror -- fault injection block device control
> + - fsync-err -- tests fsync error reporting after failed writeback
> - open_by_handle -- open_by_handle_at syscall exercise
> - stat_test -- statx syscall exercise
> - t_dir_type -- print directory entries and their file type
> @@ -30,6 +32,20 @@ af_unix
>
> The af_unix program creates an AF_UNIX socket at the given location.
>
> +dmerror
> +
> + dmerror is a program for creating, destroying and controlling a
> + fault injection device. The device can be set up as initially
> + working and then flip to throwing errors for testing purposes.
> +
> +fsync-err
> +
> + Specialized program for testing how the kernel reports errors that
> + occur during writeback. Works in conjunction with the dmerror script
> + in tools/ to write data to a device, and then force it to fail
> + writeback and test that errors are reported during fsync and cleared
> + afterward.
> +
> open_by_handle
>
> The open_by_handle program exercises the open_by_handle_at() system
> diff --git a/src/Makefile b/src/Makefile
> index 6b0e4b022485..abd0fff34a64 100644
> --- a/src/Makefile
> +++ b/src/Makefile
> @@ -13,7 +13,7 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
> multi_open_unlink dmiperf unwritten_sync genhashnames t_holes \
> t_mmap_writev t_truncate_cmtime dirhash_collide t_rename_overwrite \
> holetest t_truncate_self t_mmap_dio af_unix t_mmap_stale_pmd \
> - t_mmap_cow_race t_mmap_fallocate
> + t_mmap_cow_race t_mmap_fallocate fsync-err
src/dmerror should be installed on 'make install' too.
- $(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh $(PKG_LIB_DIR)/src
+ $(LTINSTALL) -m 755 fill2attr fill2fs fill2fs_check scaleread.sh dmerror $(PKG_LIB_DIR)/src
>
> LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
> preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
> diff --git a/src/dmerror b/src/dmerror
> new file mode 100755
> index 000000000000..4aaf682ee5f9
> --- /dev/null
> +++ b/src/dmerror
> @@ -0,0 +1,44 @@
> +#!/bin/bash
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017, Jeff Layton <jlayton@xxxxxxxxxx>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +
> +. ./common/config
> +. ./common/dmerror
> +
> +_dmerror_setup
> +
> +case $1 in
> +cleanup)
> + _dmerror_cleanup
> + ;;
> +init)
> + _dmerror_init
> + ;;
> +load_error_table)
> + _dmerror_load_error_table
> + ;;
> +load_working_table)
> + _dmerror_load_working_table
> + ;;
> +*)
> + echo "Usage: $0 {init|cleanup|load_error_table|load_working_table}"
> + exit 1
> + ;;
> +esac
> +
> +status=0
> +exit
> diff --git a/src/fsync-err.c b/src/fsync-err.c
> new file mode 100644
> index 000000000000..5b3bdd3ada07
> --- /dev/null
> +++ b/src/fsync-err.c
> @@ -0,0 +1,223 @@
> +/*
> + * fsync-err.c: test whether writeback errors are reported to all open fds
> + * and properly cleared as expected after being seen once on each
> + *
> + * Copyright (c) 2017: Jeff Layton <jlayton@xxxxxxxxxx>
> + */
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <getopt.h>
> +
> +/*
> + * btrfs has a fixed stripewidth of 64k, so we need to write enough data to
> + * ensure that we hit both stripes by default.
> + */
> +#define DEFAULT_BUFSIZE (65 * 1024)
> +
> +/* default number of fds to open */
> +#define DEFAULT_NUM_FDS 10
> +
> +static void usage()
> +{
> + printf("Usage: fsync-err [ -b bufsize ] [ -n num_fds ] -d dmerror path <filename>\n");
> +}
> +
> +int main(int argc, char **argv)
> +{
> + int *fd, ret, i, numfds = DEFAULT_NUM_FDS;
> + char *fname, *buf;
> + char *dmerror_path = NULL;
> + char *cmdbuf;
> + size_t cmdsize, bufsize = DEFAULT_BUFSIZE;
> +
> + while ((i = getopt(argc, argv, "b:d:n:")) != -1) {
> + switch (i) {
> + case 'b':
> + bufsize = strtol(optarg, &buf, 0);
> + if (*buf != '\0') {
> + printf("bad string conversion: %s\n", optarg);
> + return 1;
> + }
> + break;
> + case 'd':
> + dmerror_path = optarg;
> + break;
> + case 'n':
> + numfds = strtol(optarg, &buf, 0);
> + if (*buf != '\0') {
> + printf("bad string conversion: %s\n", optarg);
> + return 1;
> + }
> + break;
> + }
> + }
> +
> + if (argc < 1) {
> + usage();
> + return 1;
> + }
> +
> + if (!dmerror_path) {
> + printf("Must specify dmerror path with -d option!\n");
> + return 1;
> + }
> +
> + /* Remaining argument is filename */
> + fname = argv[optind];
> +
> + fd = calloc(numfds, sizeof(*fd));
> + if (!fd) {
> + printf("malloc failed: %m\n");
> + return 1;
> + }
> +
> + for (i = 0; i < numfds; ++i) {
> + fd[i] = open(fname, O_WRONLY | O_CREAT | O_TRUNC, 0644);
> + if (fd[i] < 0) {
> + printf("open of fd[%d] failed: %m\n", i);
> + return 1;
> + }
> + }
> +
> + buf = malloc(bufsize);
> + if (!buf) {
> + printf("malloc failed: %m\n");
> + return 1;
> + }
> +
> + /* fill it with some junk */
> + memset(buf, 0x7c, bufsize);
> +
> + for (i = 0; i < numfds; ++i) {
> + ret = write(fd[i], buf, bufsize);
> + if (ret < 0) {
> + printf("First write on fd[%d] failed: %m\n", i);
> + return 1;
> + }
> + }
> +
> + for (i = 0; i < numfds; ++i) {
> + ret = fsync(fd[i]);
> + if (ret < 0) {
> + printf("First fsync on fd[%d] failed: %m\n", i);
> + return 1;
> + }
> + }
> +
> + /* enough for path + dmerror command string (and then some) */
> + cmdsize = strlen(dmerror_path) + 64;
> +
> + cmdbuf = malloc(cmdsize);
> + if (!cmdbuf) {
> + printf("malloc failed: %m\n");
> + return 1;
> + }
> +
> + ret = snprintf(cmdbuf, cmdsize, "%s load_error_table", dmerror_path);
> + if (ret < 0 || ret >= cmdsize) {
> + printf("sprintf failure: %d\n", ret);
> + return 1;
> + }
> +
> + /* flip the device to non-working mode */
> + ret = system(cmdbuf);
> + if (ret) {
> + if (WIFEXITED(ret))
> + printf("system: program exited: %d\n",
> + WEXITSTATUS(ret));
> + else
> + printf("system: 0x%x\n", (int)ret);
> +
> + return 1;
> + }
> +
> + for (i = 0; i < numfds; ++i) {
> + ret = write(fd[i], buf, bufsize);
> + if (ret < 0) {
> + printf("Second write on fd[%d] failed: %m\n", i);
> + return 1;
> + }
> + }
> +
> + for (i = 0; i < numfds; ++i) {
> + ret = fsync(fd[i]);
> + /* Now, we EXPECT the error! */
> + if (ret >= 0) {
> + printf("Success on second fsync on fd[%d]!\n", i);
> + return 1;
> + }
> + }
> +
> + for (i = 0; i < numfds; ++i) {
> + ret = fsync(fd[i]);
> + if (ret < 0) {
> + /*
> + * We did a failed write and fsync on each fd before.
> + * Now the error should be clear since we've not done
> + * any writes since then.
> + */
> + printf("Third fsync on fd[%d] failed: %m\n", i);
> + return 1;
> + }
> + }
> +
> + /* flip the device to working mode */
> + ret = snprintf(cmdbuf, cmdsize, "%s load_working_table", dmerror_path);
> + if (ret < 0 || ret >= cmdsize) {
> + printf("sprintf failure: %d\n", ret);
> + return 1;
> + }
> +
> + ret = system(cmdbuf);
> + if (ret) {
> + if (WIFEXITED(ret))
> + printf("system: program exited: %d\n",
> + WEXITSTATUS(ret));
> + else
> + printf("system: 0x%x\n", (int)ret);
> +
> + return 1;
> + }
> +
> + for (i = 0; i < numfds; ++i) {
> + ret = fsync(fd[i]);
> + if (ret < 0) {
> + /* The error should still be clear */
> + printf("fsync after healing device on fd[%d] failed: %m\n", i);
> + return 1;
> + }
> + }
> +
> + /*
> + * reopen each file one at a time to ensure the same inode stays
> + * in core. fsync each one to make sure we see no errors on a fresh
> + * open of the inode.
> + */
> + for (i = 0; i < numfds; ++i) {
> + ret = close(fd[i]);
> + if (ret < 0) {
> + printf("Close of fd[%d] returned unexpected error: %m\n", i);
> + return 1;
> + }
> + fd[i] = open(fname, O_WRONLY | O_CREAT | O_TRUNC, 0644);
> + if (fd[i] < 0) {
> + printf("Second open of fd[%d] failed: %m\n", i);
> + return 1;
> + }
> + ret = fsync(fd[i]);
> + if (ret < 0) {
> + /* New opens should not return an error */
> + printf("First fsync after reopen of fd[%d] failed: %m\n", i);
> + return 1;
> + }
> + }
> +
> + printf("Test passed!\n");
> + return 0;
> +}
> diff --git a/tests/generic/999 b/tests/generic/999
> new file mode 100755
> index 000000000000..f998671ef19e
> --- /dev/null
> +++ b/tests/generic/999
> @@ -0,0 +1,77 @@
> +#! /bin/bash
> +# FS QA Test No. 999
> +#
> +# Open a file several times, write to it, fsync on all fds and make sure that
> +# they all return 0. Change the device to start throwing errors. Write again
> +# on all fds and fsync on all fds. Ensure that we get errors on all of them.
> +# Then fsync on all one last time and verify that all return 0.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017, Jeff Layton <jlayton@xxxxxxxxxx>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -rf $tmp.* $testdir
> + _dmerror_cleanup
Minor nits, please use tab for indention.
Thanks,
Eryu
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/dmerror
> +
> +# real QA test starts here
> +_supported_os Linux
> +_require_scratch
> +_require_logdev
> +_require_dm_target error
> +_require_test_program fsync-err
> +_require_test_program dmerror
> +
> +rm -f $seqres.full
> +
> +echo "Format and mount"
> +_scratch_mkfs > $seqres.full 2>&1
> +_dmerror_init
> +_dmerror_mount
> +
> +_require_fs_space $SCRATCH_MNT 65536
> +
> +testfile=$SCRATCH_MNT/fsync-err-test
> +
> +$here/src/fsync-err -d $here/src/dmerror $testfile
> +
> +# success, all done
> +_dmerror_load_working_table
> +_dmerror_unmount
> +_dmerror_cleanup
> +
> +# fs may be corrupt after this -- attempt to repair it
> +_repair_scratch_fs >> $seqres.full
> +
> +status=0
> +exit
> diff --git a/tests/generic/999.out b/tests/generic/999.out
> new file mode 100644
> index 000000000000..2e48492ff6d1
> --- /dev/null
> +++ b/tests/generic/999.out
> @@ -0,0 +1,3 @@
> +QA output created by 999
> +Format and mount
> +Test passed!
> diff --git a/tests/generic/group b/tests/generic/group
> index 5d3e4dcf732e..b56bae8f04f0 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -442,3 +442,4 @@
> 437 auto quick
> 438 auto
> 439 auto quick punch
> +999 auto quick
> --
> 2.13.0
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
