Hello everyone, This is yet another version of CMA this time stripped from a lot of code and with working migration implementation. The Contiguous Memory Allocator (CMA) makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted. For more information see 8th patch in the set. The current version is just an allocator that handles allocation of contiguous memory blocks. The difference between this patchset and Kamezawa's alloc_contig_pages() are: 1. alloc_contig_pages() requires MAX_ORDER alignment of allocations which may be unsuitable for embeded where a few MiBs are required. 2. CMA uses its own migratetype (MIGRATE_CMA) as it was suggested during one of previous iterations. The migrate type behaves similarly to ZONE_MOVABLE but can be put in arbitrary places. This is required for us since we need to define two disjoint memory ranges inside system's RAM. (ie. in two memory banks (do not confuse with nodes)). 3. alloc_contig_pages() scans memory in search for range that could be migrated. CMA on the other hand maintains its own allocator to decide where to allocate memory for device drivers and then tries to migrate pages from that part if needed. This is not strictly required but I somehow feel it might be faster. Links to previous versions of the patchset: v6: <http://article.gmane.org/gmane.linux.kernel.mm/55626/> v5: (intentionally left out as CMA v5 was identical to CMA v4) v4: <http://article.gmane.org/gmane.linux.kernel.mm/52010/> v3: <http://article.gmane.org/gmane.linux.kernel.mm/51573/> v2: <http://article.gmane.org/gmane.linux.kernel.mm/50986/> v1: <http://article.gmane.org/gmane.linux.kernel.mm/50669/> Changelog: v7: 1. A lot of functionality that handled driver->allocator_context mapping has been removed from the patchset. This is not to say that this code is not needed, it's just not worth posting everything in one patchset. Currently, CMA is "just" an allocator. It uses it's own migratetype (MIGRATE_CMA) for defining ranges of pageblokcs which behave just like ZONE_MOVABLE but dispite the latter can be put in arbitrary places. 2. The migration code that was introduced in the previous version actually started working. v6: 1. Most importantly, v6 introduces support for memory migration. The implementation is not yet complete though. Migration support means that when CMA is not using memory reserved for it, page allocator can allocate pages from it. When CMA wants to use the memory, the pages have to be moved and/or evicted as to make room for CMA. To make it possible it must be guaranteed that only movable and reclaimable pages are allocated in CMA controlled regions. This is done by introducing a MIGRATE_CMA migrate type that guarantees exactly that. Some of the migration code is "borrowed" from Kamezawa Hiroyuki's alloc_contig_pages() implementation. The main difference is that thanks to MIGRATE_CMA migrate type CMA assumes that memory controlled by CMA are is always movable or reclaimable so that it makes allocation decisions regardless of the whether some pages are actually allocated and migrates them if needed. The most interesting patches from the patchset that implement the functionality are: 09/13: mm: alloc_contig_free_pages() added 10/13: mm: MIGRATE_CMA migration type added 11/13: mm: MIGRATE_CMA isolation functions added 12/13: mm: cma: Migration support added [wip] Currently, kernel panics in some situations which I am trying to investigate. 2. cma_pin() and cma_unpin() functions has been added (after a conversation with Johan Mossberg). The idea is that whenever hardware does not use the memory (no transaction is on) the chunk can be moved around. This would allow defragmentation to be implemented if desired. No defragmentation algorithm is provided at this time. 3. Sysfs support has been replaced with debugfs. I always felt unsure about the sysfs interface and when Greg KH pointed it out I finally got to rewrite it to debugfs. v5: (intentionally left out as CMA v5 was identical to CMA v4) v4: 1. The "asterisk" flag has been removed in favour of requiring that platform will provide a "*=<regions>" rule in the map attribute. 2. The terminology has been changed slightly renaming "kind" to "type" of memory. In the previous revisions, the documentation indicated that device drivers define memory kinds and now, v3: 1. The command line parameters have been removed (and moved to a separate patch, the fourth one). As a consequence, the cma_set_defaults() function has been changed -- it no longer accepts a string with list of regions but an array of regions. 2. The "asterisk" attribute has been removed. Now, each region has an "asterisk" flag which lets one specify whether this region should by considered "asterisk" region. 3. SysFS support has been moved to a separate patch (the third one in the series) and now also includes list of regions. v2: 1. The "cma_map" command line have been removed. In exchange, a SysFS entry has been created under kernel/mm/contiguous. The intended way of specifying the attributes is a cma_set_defaults() function called by platform initialisation code. "regions" attribute (the string specified by "cma" command line parameter) can be overwritten with command line parameter; the other attributes can be changed during run-time using the SysFS entries. 2. The behaviour of the "map" attribute has been modified slightly. Currently, if no rule matches given device it is assigned regions specified by the "asterisk" attribute. It is by default built from the region names given in "regions" attribute. 3. Devices can register private regions as well as regions that can be shared but are not reserved using standard CMA mechanisms. A private region has no name and can be accessed only by devices that have the pointer to it. 4. The way allocators are registered has changed. Currently, a cma_allocator_register() function is used for that purpose. Moreover, allocators are attached to regions the first time memory is registered from the region or when allocator is registered which means that allocators can be dynamic modules that are loaded after the kernel booted (of course, it won't be possible to allocate a chunk of memory from a region if allocator is not loaded). 5. Index of new functions: +static inline dma_addr_t __must_check +cma_alloc_from(const char *regions, size_t size, + dma_addr_t alignment) +static inline int +cma_info_about(struct cma_info *info, const const char *regions) +int __must_check cma_region_register(struct cma_region *reg); +dma_addr_t __must_check +cma_alloc_from_region(struct cma_region *reg, + size_t size, dma_addr_t alignment); +static inline dma_addr_t __must_check +cma_alloc_from(const char *regions, + size_t size, dma_addr_t alignment); +int cma_allocator_register(struct cma_allocator *alloc); Patches in this patchset: mm: migrate.c: fix compilation error I had some strange compilation error; this patch fixed them. lib: bitmap: Added alignment offset for bitmap_find_next_zero_area() lib: genalloc: Generic allocator improvements Some improvements to genalloc API (most importantly possibility to allocate memory with alignment requirement). mm: move some functions from memory_hotplug.c to page_isolation.c mm: alloc_contig_free_pages() added Code "stolen" from Kamezawa. The first patch just moves code around and the second provide function for "allocates" already freed memory. mm: MIGRATE_CMA migration type added mm: MIGRATE_CMA isolation functions added Introduction of a new migratetype. mm: cma: Contiguous Memory Allocator added The CMA code. mm: cma: Test device and application added Test device and application. Not really for merging; just for testing really. Maybe the whole thing should be moved to tools? ARM: cma: Added CMA to Aquila, Goni and c210 universal boards A stub integration with some ARM machines. Mostly to get the cma testing device working. Again, not for merging. arch/arm/mach-s5pv210/mach-aquila.c | 2 + arch/arm/mach-s5pv210/mach-goni.c | 2 + arch/arm/mach-s5pv310/mach-universal_c210.c | 2 + arch/arm/plat-s5p/Makefile | 2 + arch/arm/plat-s5p/cma-stub.c | 49 +++ arch/arm/plat-s5p/include/plat/cma-stub.h | 21 ++ drivers/misc/Kconfig | 10 + drivers/misc/Makefile | 1 + drivers/misc/cma-dev.c | 238 +++++++++++++ include/linux/bitmap.h | 24 +- include/linux/cma.h | 252 ++++++++++++++ include/linux/genalloc.h | 46 ++-- include/linux/mmzone.h | 30 ++- include/linux/page-isolation.h | 47 ++- lib/bitmap.c | 22 +- lib/genalloc.c | 182 ++++++----- mm/Kconfig | 40 +++ mm/Makefile | 1 + mm/cma.c | 477 +++++++++++++++++++++++++++ mm/compaction.c | 10 + mm/internal.h | 3 + mm/memory_hotplug.c | 108 ------ mm/migrate.c | 2 + mm/page_alloc.c | 145 +++++++-- mm/page_isolation.c | 126 +++++++- tools/cma/cma-test.c | 466 ++++++++++++++++++++++++++ 26 files changed, 2040 insertions(+), 268 deletions(-) create mode 100644 arch/arm/plat-s5p/cma-stub.c create mode 100644 arch/arm/plat-s5p/include/plat/cma-stub.h create mode 100644 drivers/misc/cma-dev.c create mode 100644 include/linux/cma.h create mode 100644 mm/cma.c create mode 100644 tools/cma/cma-test.c -- 1.7.2.3 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@xxxxxxxxxx For more info on Linux MM, see: http://www.linux-mm.org/ . Fight unfair telecom policy in Canada: sign http://dissolvethecrtc.ca/ Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>