Re: [RFC PATCH v2 15/32] x86: Add support for changing memory encryption attribute in early boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 02, 2017 at 10:15:28AM -0500, Brijesh Singh wrote:
> Some KVM-specific custom MSRs shares the guest physical address with
> hypervisor. When SEV is active, the shared physical address must be mapped
> with encryption attribute cleared so that both hypervsior and guest can
> access the data.
> 
> Add APIs to change memory encryption attribute in early boot code.
> 
> Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>
> ---
>  arch/x86/include/asm/mem_encrypt.h |   15 +++++++++
>  arch/x86/mm/mem_encrypt.c          |   63 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 78 insertions(+)
> 
> diff --git a/arch/x86/include/asm/mem_encrypt.h b/arch/x86/include/asm/mem_encrypt.h
> index 9799835..95bbe4c 100644
> --- a/arch/x86/include/asm/mem_encrypt.h
> +++ b/arch/x86/include/asm/mem_encrypt.h
> @@ -47,6 +47,9 @@ void __init sme_unmap_bootdata(char *real_mode_data);
>  
>  void __init sme_early_init(void);
>  
> +int __init early_set_memory_decrypted(void *addr, unsigned long size);
> +int __init early_set_memory_encrypted(void *addr, unsigned long size);
> +
>  /* Architecture __weak replacement functions */
>  void __init mem_encrypt_init(void);
>  
> @@ -110,6 +113,18 @@ static inline void __init sme_early_init(void)
>  {
>  }
>  
> +static inline int __init early_set_memory_decrypted(void *addr,
> +						    unsigned long size)
> +{
> +	return 1;
	^^^^^^^^

return 1 when !CONFIG_AMD_MEM_ENCRYPT ?

The non-early variants return 0.

> +}
> +
> +static inline int __init early_set_memory_encrypted(void *addr,
> +						    unsigned long size)
> +{
> +	return 1;
> +}
> +
>  #define __sme_pa		__pa
>  #define __sme_pa_nodebug	__pa_nodebug
>  
> diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
> index 7df5f4c..567e0d8 100644
> --- a/arch/x86/mm/mem_encrypt.c
> +++ b/arch/x86/mm/mem_encrypt.c
> @@ -15,6 +15,7 @@
>  #include <linux/mm.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/swiotlb.h>
> +#include <linux/mem_encrypt.h>
>  
>  #include <asm/tlbflush.h>
>  #include <asm/fixmap.h>
> @@ -258,6 +259,68 @@ static void sme_free(struct device *dev, size_t size, void *vaddr,
>  	swiotlb_free_coherent(dev, size, vaddr, dma_handle);
>  }
>  
> +static unsigned long __init get_pte_flags(unsigned long address)
> +{
> +	int level;
> +	pte_t *pte;
> +	unsigned long flags = _KERNPG_TABLE_NOENC | _PAGE_ENC;
> +
> +	pte = lookup_address(address, &level);
> +	if (!pte)
> +		return flags;
> +
> +	switch (level) {
> +	case PG_LEVEL_4K:
> +		flags = pte_flags(*pte);
> +		break;
> +	case PG_LEVEL_2M:
> +		flags = pmd_flags(*(pmd_t *)pte);
> +		break;
> +	case PG_LEVEL_1G:
> +		flags = pud_flags(*(pud_t *)pte);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return flags;
> +}
> +
> +int __init early_set_memory_enc_dec(void *vaddr, unsigned long size,
> +				    unsigned long flags)
> +{
> +	unsigned long pfn, npages;
> +	unsigned long addr = (unsigned long)vaddr & PAGE_MASK;
> +
> +	/* We are going to change the physical page attribute from C=1 to C=0.
> +	 * Flush the caches to ensure that all the data with C=1 is flushed to
> +	 * memory. Any caching of the vaddr after function returns will
> +	 * use C=0.
> +	 */

Kernel comments style is:

	/*
	 * A sentence ending with a full-stop.
	 * Another sentence. ...
	 * More sentences. ...
	 */

> +	clflush_cache_range(vaddr, size);
> +
> +	npages = PAGE_ALIGN(size) >> PAGE_SHIFT;
> +	pfn = slow_virt_to_phys((void *)addr) >> PAGE_SHIFT;
> +
> +	return kernel_map_pages_in_pgd(init_mm.pgd, pfn, addr, npages,
> +					flags & ~sme_me_mask);
> +
> +}
> +
> +int __init early_set_memory_decrypted(void *vaddr, unsigned long size)
> +{
> +	unsigned long flags = get_pte_flags((unsigned long)vaddr);

So this does lookup_address()...

> +	return early_set_memory_enc_dec(vaddr, size, flags & ~sme_me_mask);

... and this does it too in slow_virt_to_phys(). So you do it twice per
vaddr.

So why don't you define a __slow_virt_to_phys() helper - notice
the "__" - which returns flags in its second parameter and which
slow_virt_to_phys() calls with a NULL second parameter in the other
cases?

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
-- 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]
  Powered by Linux