On Tue, 28 Feb 2017 10:21:48 +0900 Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx> wrote:
> This patch adds a watchdog which periodically reports number of memory
> allocating tasks, dying tasks and OOM victim tasks when some task is
> spending too long time inside __alloc_pages_slowpath(). This patch also
> serves as a hook for obtaining additional information using SystemTap
> (e.g. examine other variables using printk(), capture a crash dump by
> calling panic()) by triggering a callback only when a stall is detected.
> Ability to take administrator-controlled actions based on some threshold
> is a big advantage gained by introducing a state tracking.
>
> Commit 63f53dea0c9866e9 ("mm: warn about allocations which stall for
> too long") was a great step for reducing possibility of silent hang up
> problem caused by memory allocation stalls [1]. However, there are
> reports of long stalls (e.g. [2] is over 30 minutes!) and lockups (e.g.
> [3] is an "unable to invoke the OOM killer due to !__GFP_FS allocation"
> lockup problem) where this patch is more useful than that commit, for
> this patch can report possibly related tasks even if allocating tasks
> are unexpectedly blocked for so long. Regarding premature OOM killer
> invocation, tracepoints which can accumulate samples in short interval
> would be useful. But regarding too late to report allocation stalls,
> this patch which can capture all tasks (for reporting overall situation)
> in longer interval and act as a trigger (for accumulating short interval
> samples) would be useful.
>
> ...
>
> +Build kernels with CONFIG_DETECT_HUNG_TASK=y and
> +CONFIG_DETECT_MEMALLOC_STALL_TASK=y.
> +
> +Default scan interval is configured by CONFIG_DEFAULT_MEMALLOC_TASK_TIMEOUT.
> +Scan interval can be changed at run time by writing timeout in seconds to
> +/proc/sys/kernel/memalloc_task_warning_secs. Writing 0 disables this scan.
"seconds" seems needlessly coarse. Maybe milliseconds?
> +Even if you disable this scan, information about last memory allocation
> +request is kept. That is, you will get some hint for understanding
> +last-minute behavior of the kernel when you analyze vmcore (or memory
> +snapshot of a virtualized machine).
>
> ...
>
> +struct memalloc_info {
> + /*
> + * 0: not doing __GFP_RECLAIM allocation.
> + * 1: doing non-recursive __GFP_RECLAIM allocation.
> + * 2: doing recursive __GFP_RECLAIM allocation.
> + */
> + u8 valid;
> + /*
> + * bit 0: Will be reported as OOM victim.
> + * bit 1: Will be reported as dying task.
> + * bit 2: Will be reported as stalling task.
> + * bit 3: Will be reported as exiting task.
> + * bit 7: Will be reported unconditionally.
Create enums for these rather than hard-coding magic numbers?
These values don't seem to be used anyway - as far as I can tell this
could be a simple boolean.
> + */
> + u8 type;
> + /* Index used for memalloc_in_flight[] counter. */
> + u8 idx;
> + /* For progress monitoring. */
> + unsigned int sequence;
> + /* Started time in jiffies as of valid == 1. */
> + unsigned long start;
> + /* Requested order and gfp flags as of valid == 1. */
> + unsigned int order;
> + gfp_t gfp;
> +};
>
> ...
>
> +#ifdef CONFIG_DETECT_MEMALLOC_STALL_TASK
> +/*
> + * Zero means infinite timeout - no checking done:
> + */
> +unsigned long __read_mostly sysctl_memalloc_task_warning_secs =
> + CONFIG_DEFAULT_MEMALLOC_TASK_TIMEOUT;
> +static struct memalloc_info memalloc; /* Filled by is_stalling_task(). */
What locking protects `memalloc' from concurrent modifications and
holds it stable for readers?
>
> ...
>
> +static noinline int check_memalloc_stalling_tasks(unsigned long timeout)
> +{
> + char buf[256];
> + struct task_struct *g, *p;
> + unsigned long now;
> + unsigned long expire;
> + unsigned int sigkill_pending = 0;
> + unsigned int exiting_tasks = 0;
> + unsigned int memdie_pending = 0;
> + unsigned int stalling_tasks = 0;
> +
>
> ...
>
> + goto restart_report;
> + }
> + rcu_read_unlock();
> + preempt_enable_no_resched();
> + cond_resched();
All the cond_resched()s in this function seem a bit random.
> + /* Show memory information. (SysRq-m) */
> + show_mem(0, NULL);
> + /* Show workqueue state. */
> + show_workqueue_state();
> + /* Show lock information. (SysRq-d) */
> + debug_show_all_locks();
> + pr_warn("MemAlloc-Info: stalling=%u dying=%u exiting=%u victim=%u oom_count=%u\n",
> + stalling_tasks, sigkill_pending, exiting_tasks, memdie_pending,
> + out_of_memory_count);
> + return stalling_tasks;
> +}
> +#endif /* CONFIG_DETECT_MEMALLOC_STALL_TASK */
> +
> static void check_hung_task(struct task_struct *t, unsigned long timeout)
> {
> unsigned long switch_count = t->nvcsw + t->nivcsw;
> @@ -228,20 +429,36 @@ void reset_hung_task_detector(void)
> static int watchdog(void *dummy)
> {
> unsigned long hung_last_checked = jiffies;
> +#ifdef CONFIG_DETECT_MEMALLOC_STALL_TASK
> + unsigned long stall_last_checked = hung_last_checked;
> +#endif
>
> set_user_nice(current, 0);
>
> for ( ; ; ) {
> unsigned long timeout = sysctl_hung_task_timeout_secs;
> long t = hung_timeout_jiffies(hung_last_checked, timeout);
> -
> +#ifdef CONFIG_DETECT_MEMALLOC_STALL_TASK
> + unsigned long timeout2 = sysctl_memalloc_task_warning_secs;
> + long t2 = memalloc_timeout_jiffies(stall_last_checked,
> + timeout2);
Confused. Shouldn't timeout2 be converted from seconds to jiffies
before being passed to memalloc_timeout_jiffies()?
> + if (t2 <= 0) {
> + if (memalloc_maybe_stalling())
> + check_memalloc_stalling_tasks(timeout2);
> + stall_last_checked = jiffies;
> + continue;
> + }
> +#else
> + long t2 = t;
> +#endif
>
> ...
>
> +bool memalloc_maybe_stalling(void)
> +{
> + int cpu;
> + int sum = 0;
> + const u8 idx = memalloc_active_index ^ 1;
> +
> + for_each_possible_cpu(cpu)
Do we really need to do this for offlined and not-present CPUs?
> + sum += per_cpu(memalloc_in_flight[idx], cpu);
> + if (sum)
> + return true;
> + memalloc_active_index ^= 1;
> + return false;
> +}
> +
>
> ...
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
