On 03/08/2017 12:45 AM, lixiubo@xxxxxxxxxxxxxxxxxxxx wrote:
From: Xiubo Li <lixiubo@xxxxxxxxxxxxxxxxxxxx>
For each target there will be one ring, when the target number
grows larger and larger, it could eventually runs out of the
system memories.
In this patch for each target ring, the cmd area size will be
limited to 8M and the data area size will be limited to 1G. And
the data area will be divided into two parts: the fixed and
growing.
For the fixed part, it will be 1M size and pre-allocated together
with the cmd area. This could speed up the low iops case, and
also could make sure that each ring will have at least 1M private
data size when there has too many targets, which could get their
data blocks as quick as possible.
For the growing part, it will get the blocks from the global data
block pool. And this part will be used for high iops case.
The global data block pool is a cache, and the total size will be
limited to max 2G(grows from 0 to 2G as needed). And it will cache
the freed data blocks by a list, All targets will get from/release
to the free blocks here.
Hi Xiubo,
I will leave the detailed patch critique to others but this does seem to
achieve the goals of 1) larger TCMU data buffers to prevent bottlenecks
and 2) Allocating memory in a way that avoids using up all system memory
in corner cases.
The one thing I'm still unsure about is what we need to do to maintain
the data area's virtual mapping properly. Nobody on linux-mm answered my
email a few days ago on the right way to do this, alas. But, userspace
accessing the data area is going to cause tcmu_vma_fault() to be called,
and it seems to me like we must proactively do something -- some kind of
unmap call -- before we can reuse that memory for another, possibly
completely unrelated, backstore's data area. This could allow one
backstore handler to read or write another's data.
Regards -- Andy
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
