On Mon, 22 Nov 2010 20:44:03 +0900
Minchan Kim <minchan.kim@xxxxxxxxx> wrote:
> On Fri, Nov 19, 2010 at 5:15 PM, KAMEZAWA Hiroyuki
> <kamezawa.hiroyu@xxxxxxxxxxxxxx> wrote:
> > From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@xxxxxxxxxxxxxx>
> >
> > Add an function to allocate contiguous memory larger than MAX_ORDER.
> > The main difference between usual page allocator is that this uses
> > memory offline technique (Isolate pages and migrate remaining pages.).
> >
> > I think this is not 100% solution because we can't avoid fragmentation,
> > but we have kernelcore= boot option and can create MOVABLE zone. That
> > helps us to allow allocate a contiguous range on demand.
>
> And later we can use compaction and reclaim, too.
> So I think this approach is the way we have to go.
>
> >
> > The new function is
> >
> > Âalloc_contig_pages(base, end, nr_pages, alignment)
> >
> > This function will allocate contiguous pages of nr_pages from the range
> > [base, end). If [base, end) is bigger than nr_pages, some pfn which
> > meats alignment will be allocated. If alignment is smaller than MAX_ORDER,
>
> type meet
>
will fix.
> > it will be raised to be MAX_ORDER.
> >
> > __alloc_contig_pages() has much more arguments.
> >
> >
> > Some drivers allocates contig pages by bootmem or hiding some memory
> > from the kernel at boot. But if contig pages are necessary only in some
> > situation, kernelcore= boot option and using page migration is a choice.
> >
> > Changelog: 2010-11-19
> > Â- removed no_search
> > Â- removed some drain_ functions because they are heavy.
> > Â- check -ENOMEM case
> >
> > Changelog: 2010-10-26
> > Â- support gfp_t
> > Â- support zonelist/nodemask
> > Â- support [base, end)
> > Â- support alignment
> >
> > Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@xxxxxxxxxxxxxx>
> > ---
> > Âinclude/linux/page-isolation.h | Â 15 ++
> > Âmm/page_alloc.c        Â|  29 ++++
> > Âmm/page_isolation.c      Â| Â242 +++++++++++++++++++++++++++++++++++++++++
> > Â3 files changed, 286 insertions(+)
> >
> > Index: mmotm-1117/mm/page_isolation.c
> > ===================================================================
> > --- mmotm-1117.orig/mm/page_isolation.c
> > +++ mmotm-1117/mm/page_isolation.c
> > @@ -5,6 +5,7 @@
> > Â#include <linux/mm.h>
> > Â#include <linux/page-isolation.h>
> > Â#include <linux/pageblock-flags.h>
> > +#include <linux/swap.h>
> > Â#include <linux/memcontrol.h>
> > Â#include <linux/migrate.h>
> > Â#include <linux/memory_hotplug.h>
> > @@ -396,3 +397,244 @@ retry:
> > Â Â Â Â}
> > Â Â Â Âreturn 0;
> > Â}
> > +
> > +/*
> > + * Comparing caller specified [user_start, user_end) with physical memory layout
> > + * [phys_start, phys_end). If no intersection is longer than nr_pages, return 1.
> > + * If there is an intersection, return 0 and fill range in [*start, *end)
>
> I understand the goal of function.
> But comment is rather awkward.
>
ok, I will rewrite.
> > + */
> > +static int
> > +__calc_search_range(unsigned long user_start, unsigned long user_end,
>
> Personally, I don't like the function name.
> How about "__adjust_search_range"?
> But I am not against this name strongly. :)
>
I will rename this.
> > + Â Â Â Â Â Â Â unsigned long nr_pages,
> > + Â Â Â Â Â Â Â unsigned long phys_start, unsigned long phys_end,
> > + Â Â Â Â Â Â Â unsigned long *start, unsigned long *end)
> > +{
> > + Â Â Â if ((user_start >= phys_end) || (user_end <= phys_start))
> > + Â Â Â Â Â Â Â return 1;
> > + Â Â Â if (user_start <= phys_start) {
> > + Â Â Â Â Â Â Â *start = phys_start;
> > + Â Â Â Â Â Â Â *end = min(user_end, phys_end);
> > + Â Â Â } else {
> > + Â Â Â Â Â Â Â *start = user_start;
> > + Â Â Â Â Â Â Â *end = min(user_end, phys_end);
> > + Â Â Â }
> > + Â Â Â if (*end - *start < nr_pages)
> > + Â Â Â Â Â Â Â return 1;
> > + Â Â Â return 0;
> > +}
> > +
> > +
> > +/**
> > + * __alloc_contig_pages - allocate a contiguous physical pages
> > + * @base: the lowest pfn which caller wants.
> > + * @end: Âthe highest pfn which caller wants.
> > + * @nr_pages: the length of a chunk of pages to be allocated.
>
> the number of pages to be allocated.
>
ok.
> > + * @align_order: alignment of start address of returned chunk in order.
> > + * Â Returned' page's order will be aligned to (1 << align_order).If smaller
> > + * Â than MAX_ORDER, it's raised to MAX_ORDER.
> > + * @node: allocate near memory to the node, If -1, current node is used.
> > + * @gfpflag: used to specify what zone the memory should be from.
> > + * @nodemask: allocate memory within the nodemask.
> > + *
> > + * Search a memory range [base, end) and allocates physically contiguous
> > + * pages. If end - base is larger than nr_pages, a chunk in [base, end) will
> > + * be allocated
> > + *
> > + * This returns a page of the beginning of contiguous block. At failure, NULL
> > + * is returned.
> > + *
> > + * Limitation: at allocation, nr_pages may be increased to be aligned to
> > + * MAX_ORDER before searching a range. So, even if there is a enough chunk
> > + * for nr_pages, it may not be able to be allocated. Extra tail pages of
> > + * allocated chunk is returned to buddy allocator before returning the caller.
> > + */
> > +
> > +#define MIGRATION_RETRY Â Â Â Â(5)
> > +struct page *__alloc_contig_pages(unsigned long base, unsigned long end,
> > + Â Â Â Â Â Â Â Â Â Â Â unsigned long nr_pages, int align_order,
> > + Â Â Â Â Â Â Â Â Â Â Â int node, gfp_t gfpflag, nodemask_t *mask)
> > +{
> > + Â Â Â unsigned long found, aligned_pages, start;
> > + Â Â Â struct page *ret = NULL;
> > + Â Â Â int migration_failed;
> > + Â Â Â unsigned long align_mask;
> > + Â Â Â struct zoneref *z;
> > + Â Â Â struct zone *zone;
> > + Â Â Â struct zonelist *zonelist;
> > + Â Â Â enum zone_type highzone_idx = gfp_zone(gfpflag);
> > + Â Â Â unsigned long zone_start, zone_end, rs, re, pos;
> > +
> > + Â Â Â if (node == -1)
> > + Â Â Â Â Â Â Â node = numa_node_id();
> > +
> > + Â Â Â /* check unsupported flags */
> > + Â Â Â if (gfpflag & __GFP_NORETRY)
> > + Â Â Â Â Â Â Â return NULL;
> > + Â Â Â if ((gfpflag & (__GFP_WAIT | __GFP_IO | __GFP_FS)) !=
> > + Â Â Â Â Â Â Â (__GFP_WAIT | __GFP_IO | __GFP_FS))
> > + Â Â Â Â Â Â Â return NULL;
>
> Why do we have to care about __GFP_IO|__GFP_FS?
> If you consider compaction/reclaim later, I am OK.
>
because in page migration, we use GFP_HIGHUSER_MOVABLE now.
> > +
> > + Â Â Â if (gfpflag & __GFP_THISNODE)
> > + Â Â Â Â Â Â Â zonelist = &NODE_DATA(node)->node_zonelists[1];
> > + Â Â Â else
> > + Â Â Â Â Â Â Â zonelist = &NODE_DATA(node)->node_zonelists[0];
> > + Â Â Â /*
> > + Â Â Â Â* Base/nr_page/end should be aligned to MAX_ORDER
> > + Â Â Â Â*/
> > + Â Â Â found = 0;
> > +
> > + Â Â Â if (align_order < MAX_ORDER)
> > + Â Â Â Â Â Â Â align_order = MAX_ORDER;
> > +
> > + Â Â Â align_mask = (1 << align_order) - 1;
> > + Â Â Â /*
> > + Â Â Â Â* We allocates MAX_ORDER aligned pages and cut tail pages later.
> > + Â Â Â Â*/
> > + Â Â Â aligned_pages = ALIGN(nr_pages, (1 << MAX_ORDER));
> > + Â Â Â /*
> > + Â Â Â Â* If end - base == nr_pages, we can't search range. base must be
> > + Â Â Â Â* aligned.
> > + Â Â Â Â*/
> > + Â Â Â if ((end - base == nr_pages) && (base & align_mask))
> > + Â Â Â Â Â Â Â return NULL;
> > +
> > + Â Â Â base = ALIGN(base, (1 << align_order));
> > + Â Â Â if ((end <= base) || (end - base < aligned_pages))
> > + Â Â Â Â Â Â Â return NULL;
> > +
> > + Â Â Â /*
> > + Â Â Â Â* searching contig memory range within [pos, end).
> > + Â Â Â Â* pos is updated at migration failure to find next chunk in zone.
> > + Â Â Â Â* pos is reset to the base at searching next zone.
> > + Â Â Â Â* (see for_each_zone_zonelist_nodemask in mmzone.h)
> > + Â Â Â Â*
> > + Â Â Â Â* Note: we cannot assume zones/nodes are in linear memory layout.
> > + Â Â Â Â*/
> > + Â Â Â z = first_zones_zonelist(zonelist, highzone_idx, mask, &zone);
> > + Â Â Â pos = base;
> > +retry:
> > + Â Â Â if (!zone)
> > + Â Â Â Â Â Â Â return NULL;
> > +
> > + Â Â Â zone_start = ALIGN(zone->zone_start_pfn, 1 << align_order);
> > + Â Â Â zone_end = zone->zone_start_pfn + zone->spanned_pages;
> > +
> > + Â Â Â /* check [pos, end) is in this zone. */
> > + Â Â Â if ((pos >= end) ||
> > + Â Â Â Â Â Â(__calc_search_range(pos, end, aligned_pages,
> > + Â Â Â Â Â Â Â Â Â Â Â zone_start, zone_end, &rs, &re))) {
> > +next_zone:
> > + Â Â Â Â Â Â Â /* go to the next zone */
> > + Â Â Â Â Â Â Â z = next_zones_zonelist(++z, highzone_idx, mask, &zone);
> > + Â Â Â Â Â Â Â /* reset the pos */
> > + Â Â Â Â Â Â Â pos = base;
> > + Â Â Â Â Â Â Â goto retry;
> > + Â Â Â }
> > + Â Â Â /* [pos, end) is trimmed to [rs, re) in this zone. */
> > + Â Â Â pos = rs;
>
> The 'pos' doesn't used any more at below.
>
Ah, yes. I'll check this was for what and remove this.
Thanks,
-Kame
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxxx For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom policy in Canada: sign http://dissolvethecrtc.ca/
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>