[adding LAKML, arm64 maintainers] On Mon, Sep 19, 2016 at 09:05:26PM +0800, Yisheng Xie wrote: > hi all, Hi, In future, please make sure to Cc LAKML along with relevant parties when sending arm64 patches/queries. For everyone newly Cc'd, the original message (with attachments) can be found at: http://lkml.kernel.org/r/7618d76d-bfa8-d8aa-59aa-06f9d90c1a98@xxxxxxxxxx > When I enable NUMA in BIOS for arm64, it failed to boot on v4.8-rc4-162-g071e31e. That commit ID doesn't seem to be in mainline (I can't find it in my local tree). Which tree are you using? Do you have local patches applied? I take it that by "enable NUMA in BIOS", you mean exposing SRAT to the OS? > For the crash log, it seems caused by error number of cpumask. > Any ideas about it? Much earlier in your log, there was a (non-fatal) warning, as below. Do you see this without NUMA/SRAT enabled in your FW? I don't see how the SRAT should affect the secondaries we try to bring online. Given your MPIDRs have Aff2 bits set, I wonder if we've conflated a logical ID with a physical ID somewhere, and it just so happens that the NUMA code is more likely to poke something based on that. Can you modify the warning in cpumask.h to dump the bad CPU number? That would make it fairly clear if that's the case. Thanks, Mark. > [ 0.297337] Detected PIPT I-cache on CPU1 > [ 0.297347] GICv3: CPU1: found redistributor 10001 region 1:0x000000004d140000 > [ 0.297356] CPU1: Booted secondary processor [410fd082] > [ 0.297375] ------------[ cut here ]------------ > [ 0.320390] WARNING: CPU: 1 PID: 0 at ./include/linux/cpumask.h:121 gic_raise_softirq+0x128/0x17c > [ 0.329356] Modules linked in: > [ 0.332434] > [ 0.333932] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc4-00163-g803ea3a #21 > [ 0.341581] Hardware name: Hisilicon Hi1616 Evaluation Board (DT) > [ 0.347735] task: ffff8013e9dd0000 task.stack: ffff8013e9dcc000 > [ 0.353714] PC is at gic_raise_softirq+0x128/0x17c > [ 0.358550] LR is at gic_raise_softirq+0xa0/0x17c > [ 0.363298] pc : [<ffff00000838c124>] lr : [<ffff00000838c09c>] pstate: 200001c5 > [ 0.370770] sp : ffff8013e9dcfde0 > [ 0.374112] x29: ffff8013e9dcfde0 x28: 0000000000000000 > [ 0.379476] x27: 000000000083207c x26: ffff000008ca5d70 > [ 0.384841] x25: 0000000100000001 x24: ffff000008d63ff3 > [ 0.390205] x23: 0000000000000000 x22: ffff000008cb0000 > [ 0.395569] x21: ffff00000884edb0 x20: 0000000000000001 > [ 0.400933] x19: 0000000100000000 x18: 0000000000000000 > [ 0.406298] x17: 0000000000000000 x16: 0000000003010066 > [ 0.411661] x15: ffff000008ca8000 x14: 0000000000000013 > [ 0.417025] x13: 0000000000000000 x12: 0000000000000013 > [ 0.422389] x11: 0000000000000013 x10: 0000000002e92aa7 > [ 0.427754] x9 : 0000000000000000 x8 : ffff8413eb6ca668 > [ 0.433118] x7 : ffff8413eb6ca690 x6 : 0000000000000000 > [ 0.438482] x5 : fffffffffffffffe x4 : 0000000000000000 > [ 0.443845] x3 : 0000000000000040 x2 : 0000000000000041 > [ 0.449209] x1 : 0000000000000000 x0 : 0000000000000001 > [ 0.454573] > [ 0.456069] ---[ end trace b58e70f3295a8cd7 ]--- > [ 0.460730] Call trace: > [ 0.463193] Exception stack(0xffff8013e9dcfc10 to 0xffff8013e9dcfd40) > [ 0.469699] fc00: 0000000100000000 0001000000000000 > [ 0.477611] fc20: ffff8013e9dcfde0 ffff00000838c124 ffff000008d72228 ffff8013e9dcff70 > [ 0.485524] fc40: ffff000008d72608 ffff000008ab02a4 0000000000000000 0000000000000000 > [ 0.493436] fc60: 0000000000000000 3464313430303030 0000000000000000 0000000000000000 > [ 0.501348] fc80: ffff8013e9dcfc90 ffff00000836e678 ffff8013e9dcfca0 ffff00000836e910 > [ 0.509259] fca0: ffff8013e9dcfd30 ffff00000836ec10 0000000000000001 0000000000000000 > [ 0.517171] fcc0: 0000000000000041 0000000000000040 0000000000000000 fffffffffffffffe > [ 0.525083] fce0: 0000000000000000 ffff8413eb6ca690 ffff8413eb6ca668 0000000000000000 > [ 0.532995] fd00: 0000000002e92aa7 0000000000000013 0000000000000013 0000000000000000 > [ 0.540907] fd20: 0000000000000013 ffff000008ca8000 0000000003010066 0000000000000000 > [ 0.548819] [<ffff00000838c124>] gic_raise_softirq+0x128/0x17c > [ 0.554713] [<ffff00000808e1f4>] smp_send_reschedule+0x34/0x3c > [ 0.560605] [<ffff0000080ddf18>] resched_curr+0x40/0x5c > [ 0.565881] [<ffff0000080de650>] check_preempt_curr+0x58/0xa0 > [ 0.571685] [<ffff0000080de6b0>] ttwu_do_wakeup+0x18/0x80 > [ 0.577136] [<ffff0000080de790>] ttwu_do_activate+0x78/0x88 > [ 0.582763] [<ffff0000080df5cc>] try_to_wake_up+0x1f8/0x300 > [ 0.588390] [<ffff0000080df79c>] default_wake_function+0x10/0x18 > [ 0.594458] [<ffff0000080f3210>] __wake_up_common+0x5c/0x9c > [ 0.600085] [<ffff0000080f3264>] __wake_up_locked+0x14/0x1c > [ 0.605712] [<ffff0000080f3e10>] complete+0x40/0x5c > [ 0.610635] [<ffff00000808dba8>] secondary_start_kernel+0x148/0x1a8 > [ 0.616965] [<00000000000831a8>] 0x831a8 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@xxxxxxxxx. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>