[resending to the list since it didn't work before]
Den 8 juni 2016 6:33 em skrev "Dan Streetman" <ddstreet@xxxxxxxx>:
>
> On Wed, Jun 8, 2016 at 5:39 AM, Geliang Tang <geliangtang@xxxxxxxxx> wrote:
> > This patch adds zpool support for zram, it will allow us to use both
> > the zpool api and directly zsmalloc api in zram.
>
> besides the problems below, this was discussed a while ago and I
> believe Minchan is still against it, as nobody has so far shown what
> the benefit to zram would be; zram doesn't need the predictability, or
> evictability, of zbud or z3fold.
Well, I believe I have something to say here. z3fold is generally
faster than zsmalloc which makes it a better choice for zram
sometimes, e.g. when zram device is used for swap. Also, z3fold and
zbud do not require MMU so zram over these can be used on small Linux
powered MMU-less IoT devices, as opposed to the traditional zram over
zsmalloc. Otherwise I do agree with Dan.
>
> >
> > Signed-off-by: Geliang Tang <geliangtang@xxxxxxxxx>
> > ---
> > drivers/block/zram/zram_drv.c | 97 +++++++++++++++++++++++++++++++++++++++++++
> > drivers/block/zram/zram_drv.h | 5 +++
> > 2 files changed, 102 insertions(+)
> >
> > diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> > index 9e2a83c..1f90bd0 100644
> > --- a/drivers/block/zram/zram_drv.c
> > +++ b/drivers/block/zram/zram_drv.c
> > @@ -43,6 +43,11 @@ static const char *default_compressor = "lzo";
> > /* Module params (documentation at end) */
> > static unsigned int num_devices = 1;
> >
> > +#ifdef CONFIG_ZPOOL
> > +/* Compressed storage zpool to use */
> > +#define ZRAM_ZPOOL_DEFAULT "zsmalloc"
> > +#endif
>
> It doesn't make sense for zram to conditionally use zpool; either it
> uses it and thus has 'select ZPOOL' in its Kconfig entry, or it
> doesn't use it at all.
>
> > +
> > static inline void deprecated_attr_warn(const char *name)
> > {
> > pr_warn_once("%d (%s) Attribute %s (and others) will be removed. %s\n",
> > @@ -228,7 +233,11 @@ static ssize_t mem_used_total_show(struct device *dev,
> > down_read(&zram->init_lock);
> > if (init_done(zram)) {
> > struct zram_meta *meta = zram->meta;
> > +#ifdef CONFIG_ZPOOL
> > + val = zpool_get_total_size(meta->mem_pool) >> PAGE_SHIFT;
> > +#else
> > val = zs_get_total_pages(meta->mem_pool);
> > +#endif
> > }
> > up_read(&zram->init_lock);
> >
> > @@ -296,8 +305,14 @@ static ssize_t mem_used_max_store(struct device *dev,
> > down_read(&zram->init_lock);
> > if (init_done(zram)) {
> > struct zram_meta *meta = zram->meta;
> > +#ifdef CONFIG_ZPOOL
> > + atomic_long_set(&zram->stats.max_used_pages,
> > + zpool_get_total_size(meta->mem_pool)
> > + >> PAGE_SHIFT);
> > +#else
> > atomic_long_set(&zram->stats.max_used_pages,
> > zs_get_total_pages(meta->mem_pool));
> > +#endif
> > }
> > up_read(&zram->init_lock);
> >
> > @@ -366,6 +381,18 @@ static ssize_t comp_algorithm_store(struct device *dev,
> > return len;
> > }
> >
> > +#ifdef CONFIG_ZPOOL
> > +static void zpool_compact(void *pool)
> > +{
> > + zs_compact(pool);
> > +}
> > +
> > +static void zpool_stats(void *pool, struct zs_pool_stats *stats)
> > +{
> > + zs_pool_stats(pool, stats);
> > +}
> > +#endif
>
> first, no. this obviously makes using zpool in zram completely pointless.
>
> second, did you test this? the pool you're passing is the zpool, not
> the zs_pool. quite bad things will happen when this code runs. There
> is no way to get the zs_pool from the zpool object (that's the point
> of abstraction, of course).
>
> The fact zpool doesn't have these apis (currently) is one of the
> reasons against changing zram to use zpool.
>
> > +
> > static ssize_t compact_store(struct device *dev,
> > struct device_attribute *attr, const char *buf, size_t len)
> > {
> > @@ -379,7 +406,11 @@ static ssize_t compact_store(struct device *dev,
> > }
> >
> > meta = zram->meta;
> > +#ifdef CONFIG_ZPOOL
> > + zpool_compact(meta->mem_pool);
> > +#else
> > zs_compact(meta->mem_pool);
> > +#endif
> > up_read(&zram->init_lock);
> >
> > return len;
> > @@ -416,8 +447,14 @@ static ssize_t mm_stat_show(struct device *dev,
> >
> > down_read(&zram->init_lock);
> > if (init_done(zram)) {
> > +#ifdef CONFIG_ZPOOL
> > + mem_used = zpool_get_total_size(zram->meta->mem_pool)
> > + >> PAGE_SHIFT;
> > + zpool_stats(zram->meta->mem_pool, &pool_stats);
> > +#else
> > mem_used = zs_get_total_pages(zram->meta->mem_pool);
> > zs_pool_stats(zram->meta->mem_pool, &pool_stats);
> > +#endif
> > }
> >
> > orig_size = atomic64_read(&zram->stats.pages_stored);
> > @@ -490,10 +527,18 @@ static void zram_meta_free(struct zram_meta *meta, u64 disksize)
> > if (!handle)
> > continue;
> >
> > +#ifdef CONFIG_ZPOOL
> > + zpool_free(meta->mem_pool, handle);
> > +#else
> > zs_free(meta->mem_pool, handle);
> > +#endif
> > }
> >
> > +#ifdef CONFIG_ZPOOL
> > + zpool_destroy_pool(meta->mem_pool);
> > +#else
> > zs_destroy_pool(meta->mem_pool);
> > +#endif
> > vfree(meta->table);
> > kfree(meta);
> > }
> > @@ -513,7 +558,17 @@ static struct zram_meta *zram_meta_alloc(char *pool_name, u64 disksize)
> > goto out_error;
> > }
> >
> > +#ifdef CONFIG_ZPOOL
> > + if (!zpool_has_pool(ZRAM_ZPOOL_DEFAULT)) {
> > + pr_err("zpool %s not available\n", ZRAM_ZPOOL_DEFAULT);
> > + goto out_error;
> > + }
> > +
> > + meta->mem_pool = zpool_create_pool(ZRAM_ZPOOL_DEFAULT,
> > + pool_name, 0, NULL);
> > +#else
> > meta->mem_pool = zs_create_pool(pool_name);
> > +#endif
> > if (!meta->mem_pool) {
> > pr_err("Error creating memory pool\n");
> > goto out_error;
> > @@ -549,7 +604,11 @@ static void zram_free_page(struct zram *zram, size_t index)
> > return;
> > }
> >
> > +#ifdef CONFIG_ZPOOL
> > + zpool_free(meta->mem_pool, handle);
> > +#else
> > zs_free(meta->mem_pool, handle);
> > +#endif
> >
> > atomic64_sub(zram_get_obj_size(meta, index),
> > &zram->stats.compr_data_size);
> > @@ -577,7 +636,11 @@ static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
> > return 0;
> > }
> >
> > +#ifdef CONFIG_ZPOOL
> > + cmem = zpool_map_handle(meta->mem_pool, handle, ZPOOL_MM_RO);
> > +#else
> > cmem = zs_map_object(meta->mem_pool, handle, ZS_MM_RO);
> > +#endif
> > if (size == PAGE_SIZE) {
> > copy_page(mem, cmem);
> > } else {
> > @@ -586,7 +649,11 @@ static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
> > ret = zcomp_decompress(zstrm, cmem, size, mem);
> > zcomp_stream_put(zram->comp);
> > }
> > +#ifdef CONFIG_ZPOOL
> > + zpool_unmap_handle(meta->mem_pool, handle);
> > +#else
> > zs_unmap_object(meta->mem_pool, handle);
> > +#endif
> > bit_spin_unlock(ZRAM_ACCESS, &meta->table[index].value);
> >
> > /* Should NEVER happen. Return bio error if it does. */
> > @@ -735,20 +802,34 @@ compress_again:
> > * from the slow path and handle has already been allocated.
> > */
> > if (!handle)
> > +#ifdef CONFIG_ZPOOL
> > + ret = zpool_malloc(meta->mem_pool, clen,
> > + __GFP_KSWAPD_RECLAIM |
> > + __GFP_NOWARN |
> > + __GFP_HIGHMEM |
> > + __GFP_MOVABLE, &handle);
> > +#else
> > handle = zs_malloc(meta->mem_pool, clen,
> > __GFP_KSWAPD_RECLAIM |
> > __GFP_NOWARN |
> > __GFP_HIGHMEM |
> > __GFP_MOVABLE);
> > +#endif
> > if (!handle) {
> > zcomp_stream_put(zram->comp);
> > zstrm = NULL;
> >
> > atomic64_inc(&zram->stats.writestall);
> >
> > +#ifdef CONFIG_ZPOOL
> > + ret = zpool_malloc(meta->mem_pool, clen,
> > + GFP_NOIO | __GFP_HIGHMEM |
> > + __GFP_MOVABLE, &handle);
> > +#else
> > handle = zs_malloc(meta->mem_pool, clen,
> > GFP_NOIO | __GFP_HIGHMEM |
> > __GFP_MOVABLE);
> > +#endif
> > if (handle)
> > goto compress_again;
> >
> > @@ -758,16 +839,28 @@ compress_again:
> > goto out;
> > }
> >
> > +#ifdef CONFIG_ZPOOL
> > + alloced_pages = zpool_get_total_size(meta->mem_pool) >> PAGE_SHIFT;
> > +#else
> > alloced_pages = zs_get_total_pages(meta->mem_pool);
> > +#endif
> > update_used_max(zram, alloced_pages);
> >
> > if (zram->limit_pages && alloced_pages > zram->limit_pages) {
> > +#ifdef CONFIG_ZPOOL
> > + zpool_free(meta->mem_pool, handle);
> > +#else
> > zs_free(meta->mem_pool, handle);
> > +#endif
> > ret = -ENOMEM;
> > goto out;
> > }
> >
> > +#ifdef CONFIG_ZPOOL
> > + cmem = zpool_map_handle(meta->mem_pool, handle, ZPOOL_MM_WO);
> > +#else
> > cmem = zs_map_object(meta->mem_pool, handle, ZS_MM_WO);
> > +#endif
> >
> > if ((clen == PAGE_SIZE) && !is_partial_io(bvec)) {
> > src = kmap_atomic(page);
> > @@ -779,7 +872,11 @@ compress_again:
> >
> > zcomp_stream_put(zram->comp);
> > zstrm = NULL;
> > +#ifdef CONFIG_ZPOOL
> > + zpool_unmap_handle(meta->mem_pool, handle);
> > +#else
> > zs_unmap_object(meta->mem_pool, handle);
> > +#endif
> >
> > /*
> > * Free memory associated with this sector
> > diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h
> > index 74fcf10..68f1222 100644
> > --- a/drivers/block/zram/zram_drv.h
> > +++ b/drivers/block/zram/zram_drv.h
> > @@ -17,6 +17,7 @@
> >
> > #include <linux/rwsem.h>
> > #include <linux/zsmalloc.h>
> > +#include <linux/zpool.h>
> > #include <linux/crypto.h>
> >
> > #include "zcomp.h"
> > @@ -91,7 +92,11 @@ struct zram_stats {
> >
> > struct zram_meta {
> > struct zram_table_entry *table;
> > +#ifdef CONFIG_ZPOOL
> > + struct zpool *mem_pool;
> > +#else
> > struct zs_pool *mem_pool;
> > +#endif
> > };
> >
> > struct zram {
> > --
> > 1.9.1
> >
Best regards,
Vitaly
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>