On 03/07/2016 01:51 PM, Vlastimil Babka wrote:
[+CC ARM, module maintainers/lists]
On 03/07/2016 12:14 PM, Matwey V. Kornilov wrote:
Hello,
I see the following when try to boot 4.5.0-rc6 on ARM TI AM33xx based board.
[ 13.907631] ------------[ cut here ]------------
[ 13.912323] kernel BUG at ../mm/memory.c:1879!
That's:
BUG_ON(addr >= end);
where:
end = addr + size;
All these variables are unsigned long, so they overflown?
I don't know ARM much, and there's no code for decodecode, but if I get
the calling convention correctly, and the registers didn't change, both
addr is r1 and size is r2, i.e. both bf006000. Weird.
OK, wrong, according to followup mail from Matwey which I'm pasting here
to include the CC list:
===
I believe the following kgdb backtrace is relevant.
size = 0 for some reason in apply_to_page_range
This means that end == addr.
(gdb) bt
#0 apply_to_page_range (mm=0xc11d3190 <init_mm>, addr=3204472832,
size=0, fn=0xc0231cec <change_page_range>, data=0xdb5c3de8)
at ../mm/memory.c:1876
#1 0xc0231dc4 in change_memory_common (addr=3204472832,
numpages=<optimized out>, set_mask=<optimized out>, clear_mask=0)
at ../arch/arm/mm/pageattr.c:61
#2 0xc0231e30 in set_memory_ro (addr=<optimized out>,
numpages=<optimized out>) at ../arch/arm/mm/pageattr.c:70
#3 0xc02fd5b4 in frob_rodata (layout=<optimized out>,
set_memory=0xbf006000) at ../kernel/module.c:1983
#4 0xc02ff4f8 in module_enable_ro (mod=<optimized out>) at
../kernel/module.c:2011
#5 0xc0301c80 in complete_formation (info=<optimized out>,
mod=<optimized out>) at ../kernel/module.c:3494
#6 load_module (info=0xdb5c3f40, uargs=<optimized out>,
flags=<optimized out>) at ../kernel/module.c:3622
#7 0xc0302120 in SYSC_finit_module (flags=<optimized out>,
uargs=<optimized out>, fd=<optimized out>) at ../kernel/module.c:3741
#8 SyS_finit_module (fd=6, uargs=-1226082716, flags=0) at
../kernel/module.c:3722
#9 0xc021c140 in arm_elf_read_implies_exec (x=<optimized out>,
executable_stack=-1090494464) at ../arch/arm/kernel/elf.c:90
#10 0x00000006 in __vectors_start ()
Backtrace stopped: previous frame inner to this frame (corrupt stack?)
[ 13.916795] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ 13.922663] Modules linked in:
[ 13.925761] CPU: 0 PID: 242 Comm: systemd-udevd Not tainted 4.5.0-rc6-3.ga55dde2-default #1
[ 13.934153] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 13.940281] task: c2da2040 ti: c2db4000 task.ti: c2db4000
[ 13.945738] PC is at apply_to_page_range+0x23c/0x240
[ 13.950741] LR is at change_memory_common+0x94/0xe0
[ 13.955648] pc : [<c03b333c>] lr : [<c0231dc4>] psr: 60010013
[ 13.955648] sp : c2db5d88 ip : c2db5dd8 fp : c2db5dd4
[ 13.967182] r10: bf002080 r9 : c2db5de8 r8 : c0231cec
[ 13.972434] r7 : bf002180 r6 : bf006000 r5 : bf006000 r4 : bf006000
[ 13.978995] r3 : c0231cec r2 : bf006000 r1 : bf006000 r0 : c11d3190
[ 13.985559] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 13.992732] Control: 10c5387d Table: 82dc0019 DAC: 00000055
[ 13.998509] Process systemd-udevd (pid: 242, stack limit = 0xc2db4220)
[ 14.005070] Stack: (0xc2db5d88 to 0xc2db6000)
[ 14.009457] 5d80: bf005fff c11d3190 c11d3190 00000001 c1187dc4 c136c540
[ 14.017682] 5da0: bf006000 c11d3190 c2db5dd4 bf006000 00000000 bf006000 bf002180 00000000
[ 14.025907] 5dc0: c118350c bf002080 c2db5e14 c2db5dd8 c0231dc4 c03b310c c2db5de8 0000000c
[ 14.034130] 5de0: c2db5dfc c2db5df0 00000080 00000000 c2db5e4c c0231e10 bf0021ac bf002180
[ 14.042355] 5e00: bf002180 bf0021ac c2db5e24 c2db5e18 c0231e30 c0231d3c c2db5e3c c2db5e28
[ 14.050579] 5e20: c02fd5b4 c0231e1c c0231e10 bf0021ac c2db5e5c c2db5e40 c02ff4f8 c02fd568
[ 14.058802] 5e40: 00000001 bf00208c c2db5f40 bf002180 c2db5f34 c2db5e60 c0301c80 c02ff4ac
[ 14.067025] 5e60: bf002080 c042d74c 00000000 00000000 bf000000 c118350c c0b359cc 00000000
[ 14.075250] 5e80: bf00208c c118350c bf003000 c2db5ea0 bf002190 bf00208c 000014e4 00000000
[ 14.083473] 5ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 14.091695] 5ec0: 00000000 00000000 6e72656b 00006c65 00000000 00000000 00000000 00000000
[ 14.099918] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 14.108143] 5f00: 00000000 dc8ba700 00000010 00000000 00000006 b6e73664 0000017b c021c308
[ 14.116367] 5f20: c2db4000 00000000 c2db5fa4 c2db5f38 c0302120 c03009ac 00000002 00000000
[ 14.124590] 5f40: d0851000 000014e4 d0851f0c d085180b d0851ca4 00003000 00003110 00000000
[ 14.132814] 5f60: 00000000 00000000 00001538 0000001b 0000001c 00000014 00000011 0000000d
[ 14.141036] 5f80: 00000000 00000000 00000000 7f611780 00000000 00000000 00000000 c2db5fa8
[ 14.149259] 5fa0: c021c140 c0302090 7f611780 00000000 00000006 b6e73664 00000000 7f611830
[ 14.157484] 5fc0: 7f611780 00000000 00000000 0000017b 00000000 00000000 00020000 80a76238
[ 14.165707] 5fe0: be8c8058 be8c8048 b6e69de0 b6d8db40 60010010 00000006 45145044 91104437
[ 14.173957] [<c03b333c>] (apply_to_page_range) from [<c0231dc4>] (change_memory_common+0x94/0xe0)
[ 14.182888] [<c0231dc4>] (change_memory_common) from [<c0231e30>] (set_memory_ro+0x20/0x28)
[ 14.191307] [<c0231e30>] (set_memory_ro) from [<c02fd5b4>] (frob_rodata+0x58/0x6c)
[ 14.198930] [<c02fd5b4>] (frob_rodata) from [<c02ff4f8>] (module_enable_ro+0x58/0x60)
These just seem to pass on whatever module loader told them.
[ 14.206811] [<c02ff4f8>] (module_enable_ro) from [<c0301c80>] (load_module+0x12e0/0x1548)
This uses mod->core_layout to get the range, so maybe that's what's wrong?
[ 14.215039] [<c0301c80>] (load_module) from [<c0302120>] (SyS_finit_module+0x9c/0xd8)
[ 14.222920] [<c0302120>] (SyS_finit_module) from [<c021c140>] (ret_fast_syscall+0x0/0x34)
[ 14.231148] Code: e3500000 1afffff4 e51a3008 eaffffe5 (e7f001f2)
[ 14.237282] ---[ end trace e25b4430ecf4fcdd ]---
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>