On Mon, Mar 1, 2010 at 7:10 PM, Wu Fengguang <fengguang.wu@xxxxxxxxx> wrote:
> Dave,
>
> Here is one more test on a big ext4 disk file:
>
> 16k 39.7 MB/s
> 32k 54.3 MB/s
> 64k 63.6 MB/s
> 128k 72.6 MB/s
> 256k 71.7 MB/s
> rsize ==> 512k 71.7 MB/s
> 1024k 72.2 MB/s
> 2048k 71.0 MB/s
> 4096k 73.0 MB/s
> 8192k 74.3 MB/s
> 16384k 74.5 MB/s
>
> It shows that >=128k client side readahead is enough for single disk
> case :) As for RAID configurations, I guess big server side readahead
> should be enough.
>
> #!/bin/sh
>
> file=/mnt/ext4_test/zero
> BDI=0:24
>
> for rasize in 16 32 64 128 256 512 1024 2048 4096 8192 16384
> do
> echo $rasize > /sys/devices/virtual/bdi/$BDI/read_ahead_kb
> echo readahead_size=${rasize}k
> fadvise $file 0 0 dontneed
> ssh p9 "fadvise $file 0 0 dontneed"
> dd if=$file of=/dev/null bs=4k count=402400
> done
how do you determine which bdi to use? I skimmed thru
the filesystem in /sys and didn't see anything that says which is what
> Thanks,
> Fengguang
>
> On Fri, Feb 26, 2010 at 03:49:16PM +0800, Wu Fengguang wrote:
>> On Wed, Feb 24, 2010 at 03:39:40PM +0800, Dave Chinner wrote:
>> > On Wed, Feb 24, 2010 at 02:12:47PM +0800, Wu Fengguang wrote:
>> > > On Wed, Feb 24, 2010 at 01:22:15PM +0800, Dave Chinner wrote:
>> > > > What I'm trying to say is that while I agree with your premise that
>> > > > a 7.8MB readahead window is probably far larger than was ever
>> > > > intended, I disagree with your methodology and environment for
>> > > > selecting a better default value. The default readahead value needs
>> > > > to work well in as many situations as possible, not just in perfect
>> > > > 1:1 client/server environment.
>> > >
>> > > Good points. It's imprudent to change a default value based on one
>> > > single benchmark. Need to collect more data, which may take time..
>> >
>> > Agreed - better to spend time now to get it right...
>>
>> I collected more data with large network latency as well as rsize=32k,
>> and updates the readahead size accordingly to 4*rsize.
>>
>> ===
>> nfs: use 2*rsize readahead size
>>
>> With default rsize=512k and NFS_MAX_READAHEAD=15, the current NFS
>> readahead size 512k*15=7680k is too large than necessary for typical
>> clients.
>>
>> On a e1000e--e1000e connection, I got the following numbers
>> (this reads sparse file from server and involves no disk IO)
>>
>> readahead size normal 1ms+1ms 5ms+5ms 10ms+10ms(*)
>> 16k 35.5 MB/s 4.8 MB/s 2.1 MB/s 1.2 MB/s
>> 32k 54.3 MB/s 6.7 MB/s 3.6 MB/s 2.3 MB/s
>> 64k 64.1 MB/s 12.6 MB/s 6.5 MB/s 4.7 MB/s
>> 128k 70.5 MB/s 20.1 MB/s 11.9 MB/s 8.7 MB/s
>> 256k 74.6 MB/s 38.6 MB/s 21.3 MB/s 15.0 MB/s
>> rsize ==> 512k 77.4 MB/s 59.4 MB/s 39.8 MB/s 25.5 MB/s
>> 1024k 85.5 MB/s 77.9 MB/s 65.7 MB/s 43.0 MB/s
>> 2048k 86.8 MB/s 81.5 MB/s 84.1 MB/s 59.7 MB/s
>> 4096k 87.9 MB/s 77.4 MB/s 56.2 MB/s 59.2 MB/s
>> 8192k 89.0 MB/s 81.2 MB/s 78.0 MB/s 41.2 MB/s
>> 16384k 87.7 MB/s 85.8 MB/s 62.0 MB/s 56.5 MB/s
>>
>> readahead size normal 1ms+1ms 5ms+5ms 10ms+10ms(*)
>> 16k 37.2 MB/s 6.4 MB/s 2.1 MB/s 1.2 MB/s
>> rsize ==> 32k 56.6 MB/s 6.8 MB/s 3.6 MB/s 2.3 MB/s
>> 64k 66.1 MB/s 12.7 MB/s 6.6 MB/s 4.7 MB/s
>> 128k 69.3 MB/s 22.0 MB/s 12.2 MB/s 8.9 MB/s
>> 256k 69.6 MB/s 41.8 MB/s 20.7 MB/s 14.7 MB/s
>> 512k 71.3 MB/s 54.1 MB/s 25.0 MB/s 16.9 MB/s
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> 1024k 71.5 MB/s 48.4 MB/s 26.0 MB/s 16.7 MB/s
>> 2048k 71.7 MB/s 53.2 MB/s 25.3 MB/s 17.6 MB/s
>> 4096k 71.5 MB/s 50.4 MB/s 25.7 MB/s 17.1 MB/s
>> 8192k 71.1 MB/s 52.3 MB/s 26.3 MB/s 16.9 MB/s
>> 16384k 70.2 MB/s 56.6 MB/s 27.0 MB/s 16.8 MB/s
>>
>> (*) 10ms+10ms means to add delay on both client & server sides with
>> # /sbin/tc qdisc change dev eth0 root netem delay 10ms
>> The total >=20ms delay is so large for NFS, that a simple `vi some.sh`
>> command takes a dozen seconds. Note that the actual delay reported
>> by ping is larger, eg. for the 1ms+1ms case:
>> rtt min/avg/max/mdev = 7.361/8.325/9.710/0.837 ms
>>
>>
>> So it seems that readahead_size=4*rsize (ie. keep 4 RPC requests in
>> flight) is able to get near full NFS bandwidth. Reducing the mulriple
>> from 15 to 4 not only makes the client side readahead size more sane
>> (2MB by default), but also reduces the disorderness of the server side
>> RPC read requests, which yeilds better server side readahead behavior.
>>
>> To avoid small readahead when the client mount with "-o rsize=32k" or
>> the server only supports rsize <= 32k, we take the max of 2*rsize and
>> default_backing_dev_info.ra_pages. The latter defaults to 512K, and can
>> be explicitly changed by user with kernel parameter "readahead=" and
>> runtime tunable "/sys/devices/virtual/bdi/default/read_ahead_kb" (which
>> takes effective for future NFS mounts).
>>
>> The test script is:
>>
>> #!/bin/sh
>>
>> file=/mnt/sparse
>> BDI=0:15
>>
>> for rasize in 16 32 64 128 256 512 1024 2048 4096 8192 16384
>> do
>> echo 3 > /proc/sys/vm/drop_caches
>> echo $rasize > /sys/devices/virtual/bdi/$BDI/read_ahead_kb
>> echo readahead_size=${rasize}k
>> dd if=$file of=/dev/null bs=4k count=1024000
>> done
>>
>> CC: Dave Chinner <david@xxxxxxxxxxxxx>
>> CC: Trond Myklebust <Trond.Myklebust@xxxxxxxxxx>
>> Signed-off-by: Wu Fengguang <fengguang.wu@xxxxxxxxx>
>> ---
>> fs/nfs/client.c | 4 +++-
>> fs/nfs/internal.h | 8 --------
>> 2 files changed, 3 insertions(+), 9 deletions(-)
>>
>> --- linux.orig/fs/nfs/client.c 2010-02-26 10:10:46.000000000 +0800
>> +++ linux/fs/nfs/client.c 2010-02-26 11:07:22.000000000 +0800
>> @@ -889,7 +889,9 @@ static void nfs_server_set_fsinfo(struct
>> server->rpages = (server->rsize + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
>>
>> server->backing_dev_info.name = "nfs";
>> - server->backing_dev_info.ra_pages = server->rpages * NFS_MAX_READAHEAD;
>> + server->backing_dev_info.ra_pages = max_t(unsigned long,
>> + default_backing_dev_info.ra_pages,
>> + 4 * server->rpages);
>> server->backing_dev_info.capabilities |= BDI_CAP_ACCT_UNSTABLE;
>>
>> if (server->wsize > max_rpc_payload)
>> --- linux.orig/fs/nfs/internal.h 2010-02-26 10:10:46.000000000 +0800
>> +++ linux/fs/nfs/internal.h 2010-02-26 11:07:07.000000000 +0800
>> @@ -10,14 +10,6 @@
>>
>> struct nfs_string;
>>
>> -/* Maximum number of readahead requests
>> - * FIXME: this should really be a sysctl so that users may tune it to suit
>> - * their needs. People that do NFS over a slow network, might for
>> - * instance want to reduce it to something closer to 1 for improved
>> - * interactive response.
>> - */
>> -#define NFS_MAX_READAHEAD (RPC_DEF_SLOT_TABLE - 1)
>> -
>> /*
>> * Determine if sessions are in use.
>> */
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxxx For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href