Re: [RFC] nfs: use 2*rsize readahead size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 24, 2010 at 12:24:14PM +0800, Dave Chinner wrote:
> On Wed, Feb 24, 2010 at 02:29:34PM +1100, Dave Chinner wrote:
> > On Wed, Feb 24, 2010 at 10:41:01AM +0800, Wu Fengguang wrote:
> > > With default rsize=512k and NFS_MAX_READAHEAD=15, the current NFS
> > > readahead size 512k*15=7680k is too large than necessary for typical
> > > clients.
> > > 
> > > On a e1000e--e1000e connection, I got the following numbers
> > > 
> > > 	readahead size		throughput
> > > 		   16k           35.5 MB/s
> > > 		   32k           54.3 MB/s
> > > 		   64k           64.1 MB/s
> > > 		  128k           70.5 MB/s
> > > 		  256k           74.6 MB/s
> > > rsize ==>	  512k           77.4 MB/s
> > > 		 1024k           85.5 MB/s
> > > 		 2048k           86.8 MB/s
> > > 		 4096k           87.9 MB/s
> > > 		 8192k           89.0 MB/s
> > > 		16384k           87.7 MB/s
> > > 
> > > So it seems that readahead_size=2*rsize (ie. keep two RPC requests in flight)
> > > can already get near full NFS bandwidth.
> > > 
> > > The test script is:
> > > 
> > > #!/bin/sh
> > > 
> > > file=/mnt/sparse
> > > BDI=0:15
> > > 
> > > for rasize in 16 32 64 128 256 512 1024 2048 4096 8192 16384
> > > do
> > > 	echo 3 > /proc/sys/vm/drop_caches
> > > 	echo $rasize > /sys/devices/virtual/bdi/$BDI/read_ahead_kb
> > > 	echo readahead_size=${rasize}k
> > > 	dd if=$file of=/dev/null bs=4k count=1024000
> > > done
> > 
> > That's doing a cached read out of the server cache, right? You
> > might find the results are different if the server has to read the
> > file from disk. I would expect reads from the server cache not
> > to require much readahead as there is no IO latency on the server
> > side for the readahead to hide....
> 
> FWIW, if you mount the client with "-o rsize=32k" or the server only
> supports rsize <= 32k then this will probably hurt throughput a lot
> because then readahead will be capped at 64k instead of 480k....

I should have mentioned that in changelog.. Hope the updated one
helps.

Thanks,
Fengguang
---
nfs: use 2*rsize readahead size

With default rsize=512k and NFS_MAX_READAHEAD=15, the current NFS
readahead size 512k*15=7680k is too large than necessary for typical
clients.

On a e1000e--e1000e connection, I got the following numbers
(this reads sparse file from server and involves no disk IO)

	readahead size		throughput
		   16k           35.5 MB/s
		   32k           54.3 MB/s
		   64k           64.1 MB/s
		  128k           70.5 MB/s
		  256k           74.6 MB/s
rsize ==>	  512k           77.4 MB/s
		 1024k           85.5 MB/s
		 2048k           86.8 MB/s
		 4096k           87.9 MB/s
		 8192k           89.0 MB/s
		16384k           87.7 MB/s

So it seems that readahead_size=2*rsize (ie. keep two RPC requests in flight)
can already get near full NFS bandwidth.

To avoid small readahead when the client mount with "-o rsize=32k" or
the server only supports rsize <= 32k, we take the max of 2*rsize and
default_backing_dev_info.ra_pages. The latter defaults to 512K, and
will be auto scaled down when system memory is less than 512M, or can
be explicitly changed by user with kernel parameter "readahead=".

The test script is:

#!/bin/sh

file=/mnt/sparse
BDI=0:15

for rasize in 16 32 64 128 256 512 1024 2048 4096 8192 16384
do
	echo 3 > /proc/sys/vm/drop_caches
	echo $rasize > /sys/devices/virtual/bdi/$BDI/read_ahead_kb
	echo readahead_size=${rasize}k
	dd if=$file of=/dev/null bs=4k count=1024000
done

CC: Dave Chinner <david@xxxxxxxxxxxxx> 
CC: Trond Myklebust <Trond.Myklebust@xxxxxxxxxx>
Signed-off-by: Wu Fengguang <fengguang.wu@xxxxxxxxx>
---
 fs/nfs/client.c   |    4 +++-
 fs/nfs/internal.h |    8 --------
 2 files changed, 3 insertions(+), 9 deletions(-)

--- linux.orig/fs/nfs/client.c	2010-02-23 11:15:44.000000000 +0800
+++ linux/fs/nfs/client.c	2010-02-24 10:16:00.000000000 +0800
@@ -889,7 +889,9 @@ static void nfs_server_set_fsinfo(struct
 	server->rpages = (server->rsize + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 
 	server->backing_dev_info.name = "nfs";
-	server->backing_dev_info.ra_pages = server->rpages * NFS_MAX_READAHEAD;
+	server->backing_dev_info.ra_pages = max_t(unsigned long,
+					      default_backing_dev_info.ra_pages,
+					      2 * server->rpages);
 	server->backing_dev_info.capabilities |= BDI_CAP_ACCT_UNSTABLE;
 
 	if (server->wsize > max_rpc_payload)
--- linux.orig/fs/nfs/internal.h	2010-02-23 11:15:44.000000000 +0800
+++ linux/fs/nfs/internal.h	2010-02-23 13:26:00.000000000 +0800
@@ -10,14 +10,6 @@
 
 struct nfs_string;
 
-/* Maximum number of readahead requests
- * FIXME: this should really be a sysctl so that users may tune it to suit
- *        their needs. People that do NFS over a slow network, might for
- *        instance want to reduce it to something closer to 1 for improved
- *        interactive response.
- */
-#define NFS_MAX_READAHEAD	(RPC_DEF_SLOT_TABLE - 1)
-
 /*
  * Determine if sessions are in use.
  */

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxxx  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]