Re: Kernel panic due to page migration accessing memory holes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 18, 2010 at 06:36:04PM +0900, KAMEZAWA Hiroyuki wrote:
> On Thu, 18 Feb 2010 00:22:24 -0800
> Michael Bohan <mbohan@xxxxxxxxxxxxxx> wrote:
> 
> > On 2/17/2010 5:03 PM, KAMEZAWA Hiroyuki wrote:
> > > On Wed, 17 Feb 2010 16:45:54 -0800
> > > Michael Bohan<mbohan@xxxxxxxxxxxxxx>  wrote:
> > >> As a temporary fix, I added some code to move_freepages_block() that
> > >> inspects whether the range exceeds our first memory bank -- returning 0
> > >> if it does.  This is not a clean solution, since it requires exporting
> > >> the ARM specific meminfo structure to extract the bank information.
> > >>
> > >>      
> > > Hmm, my first impression is...
> > >
> > > - Using FLATMEM, memmap is created for the number of pages and memmap should
> > >    not have aligned size.
> > > - Using SPARSEMEM, memmap is created for aligned number of pages.
> > >
> > > Then, the range [zone->start_pfn ... zone->start_pfn + zone->spanned_pages]
> > > should be checked always.
> > >
> > >
> > >   803 static int move_freepages_block(struct zone *zone, struct page *page,
> > >   804                                 int migratetype)
> > >   805 {
> > >   816         if (start_pfn<  zone->zone_start_pfn)
> > >   817                 start_page = page;
> > >   818         if (end_pfn>= zone->zone_start_pfn + zone->spanned_pages)
> > >   819                 return 0;
> > >   820
> > >   821         return move_freepages(zone, start_page, end_page, migratetype);
> > >   822 }
> > >
> > > "(end_pfn>= zone->zone_start_pfn + zone->spanned_pages)" is checked.
> > > What zone->spanned_pages is set ? The zone's range is
> > > [zone->start_pfn ... zone->start_pfn+zone->spanned_pages], so this
> > > area should have initialized memmap. I wonder zone->spanned_pages is too big.
> > >    
> > 
> > In the block of code above running on my target, the zone_start_pfn is 
> > is 0x200 and the spanned_pages is 0x44100.  This is consistent with the 
> > values shown from the zoneinfo file below.  It is also consistent with 
> > my memory map:
> > 
> > bank0:
> >      start: 0x00200000
> >      size:  0x07B00000
> > 
> > bank1:
> >      start: 0x40000000
> >      size:  0x04300000
> > 
> > Thus, spanned_pages here is the highest address reached minus the start 
> > address of the lowest bank (eg. 0x40000000 + 0x04300000 - 0x00200000).
> > 
> > Both of these banks exist in the same zone.  This means that the check 
> > in move_freepages_block() will never be satisfied for cases that overlap 
> > with the prohibited pfns, since the zone spans invalid pfns.  Should 
> > each bank be associated with its own zone?
> > 
> 
> Hmm. okay then..(CCing Mel.)
> 
>  [Fact]
>  - There are 2 banks of memory and a memory hole on your machine.
>    As
>          0x00200000 - 0x07D00000
>          0x40000000 - 0x43000000
> 
>  - Each bancks are in the same zone.
>  - You use FLATMEM.
>  - You see panic in move_freepages().
>  - Your host's MAX_ORDER=11....buddy allocator's alignment is 0x400000
>    Then, it seems 1st bank is not algined.

It's not and assumptions are made about it being aligned.

>  - You see panic in move_freepages().
>  - When you added special range check for bank0 in move_freepages(), no panic.
>    So, it seems the kernel see somehing bad at accessing memmap for a memory 
>    hole between bank0 and bank1.
> 
> 
> When you use FLATMEM, memmap/migrate-type-bitmap should be allocated for
> the whole range of [start_pfn....max_pfn) regardless of memory holes. 
> Then, I think you have memmap even for a memory hole [0x07D00000...0x40000000)
> 

It would have at the start but then ....


> Then, the question is why move_freepages() panic at accessing *unused* memmaps
> for memory hole. All memmap(struct page) are initialized in 
>   memmap_init()
> 	-> memmap_init_zone()
> 		-> ....
>   Here, all page structs are initialized (page->flags, page->lru are initialized.)
> 

ARM frees unused portions of memmap to save memory. It's why memmap_valid_within()
exists when CONFIG_ARCH_HAS_HOLES_MEMORYMODEL although previously only
reading /proc/pagetypeinfo cared.

In that case, the FLATMEM memory map had unexpected holes which "never"
happens and that was the workaround. The problem here is that there are
unaligned zones but no pfn_valid() implementation that can identify
them as you'd have with SPARSEMEM. My expectation is that you are using
the pfn_valid() implementation from asm-generic

#define pfn_valid(pfn)          ((pfn) < max_mapnr)

which is insufficient in your case.

> Then, looking back into move_freepages().
>  ==
>  778         for (page = start_page; page <= end_page;) {
>  779                 /* Make sure we are not inadvertently changing nodes */
>  780                 VM_BUG_ON(page_to_nid(page) != zone_to_nid(zone));
>  781 
>  782                 if (!pfn_valid_within(page_to_pfn(page))) {
>  783                         page++;
>  784                         continue;
>  785                 }
>  786 
>  787                 if (!PageBuddy(page)) {
>  788                         page++;
>  789                         continue;
>  790                 }
>  791 
>  792                 order = page_order(page);
>  793                 list_del(&page->lru);
>  794                 list_add(&page->lru,
>  795                         &zone->free_area[order].free_list[migratetype]);
>  796                 page += 1 << order;
>  797                 pages_moved += 1 << order;
>  798         }
>  ==
> Assume an access to page struct itself doesn't cause panic.
> Touching page struct's member of page->lru at el to cause panic,
> So, PageBuddy should be set.
> 
> Then, there are 2 chances.
>   1. page_to_nid(page) != zone_to_nid(zone).
>   2. PageBuddy() is set by mistake.
>      (PG_reserved page never be set PG_buddy.)
> 
> For both, something corrupted in unused memmap area.
> There are 2 possibility.
>  (1) memmap for memory hole was not initialized correctly.
>  (2) something wrong currupt memmap. (by overwrite.)
> 
> I doubt (2) rather than (1).
> 

I think it's more likely the at the memmap he is accessing has been
freed and is effectively random data.

> One of difficulty here is that your kernel is 2.6.29. Can't you try 2.6.32 and
> reproduce trouble ? Or could you check page flags for memory holes ?
> For holes, nid should be zero and PG_buddy shouldn't be set and PG_reserved
> should be set...
> 
> And checking memmap initialization of memory holes in memmap_init_zone() 
> may be good start point for debug, I guess.
> 
> Off topic:
> BTW, memory hole seems huge for your size of memory....using SPARSEMEM
> is a choice.
> 

SPARSEMEM would give you an implementation of pfn_valid() that you could
use here. The choices that spring to mind are;

1. reduce MAX_ORDER so they are aligned (easiest)
2. use SPARSEMEM (easy, but not necessary what you want to do, might
	waste memory unless you drop MAX_ORDER as well)
3. implement a pfn_valid() that can handle the holes and set
	CONFIG_HOLES_IN_ZONE so it's called in move_freepages() to
	deal with the holes (should pass this by someone more familiar
	with ARM than I)
4. Call memmap_valid_within in move_freepages (very very ugly, not
	suitable for upstream merging)

-- 
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxxx  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]