Current RT2880 device tree file system controller node is wrong since it is
not matching bindings. Hence, update it to match current bindings updating
it also to use new introduced clock constants.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
arch/mips/boot/dts/ralink/rt2880.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
index 8fc1987d9063..1f2ea3434324 100644
--- a/arch/mips/boot/dts/ralink/rt2880.dtsi
+++ b/arch/mips/boot/dts/ralink/rt2880.dtsi
@@ -1,4 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
+
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -25,9 +27,11 @@ palmbus@300000 {
#address-cells = <1>;
#size-cells = <1>;
- sysc@0 {
- compatible = "ralink,rt2880-sysc";
+ sysc: syscon@0 {
+ compatible = "ralink,rt2880-sysc", "syscon";
reg = <0x0 0x100>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
};
intc: intc@200 {
@@ -50,6 +54,8 @@ uartlite@c00 {
compatible = "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
+ clocks = <&sysc RT2880_CLK_UARTLITE>;
+
interrupt-parent = <&intc>;
interrupts = <8>;
--
2.25.1
