On Mon, Dec 16, 2024 at 04:13:46PM +1300, Chris Packham wrote:
> Add a driver for the MDIO controller on the RTL9300 family of Ethernet
> switches with integrated SoC. There are 4 physical SMI interfaces on the
> RTL9300 but access is done using the switch ports so a single MDIO bus
> is presented to the rest of the system.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
...
> diff --git a/drivers/net/mdio/mdio-realtek-rtl.c b/drivers/net/mdio/mdio-realtek-rtl.c
...
> +#define MAX_SMI_BUSSES 4
> +#define MAX_SMI_ADDR 0x1f
> +
> +struct realtek_mdio_priv {
> + struct regmap *regmap;
> + u8 smi_bus[MAX_PORTS];
> + u8 smi_addr[MAX_PORTS];
> + bool smi_bus_isc45[MAX_SMI_BUSSES];
> + u32 reg_base;
> +};
...
> +static int realtek_mdiobus_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct realtek_mdio_priv *priv;
> + struct fwnode_handle *child;
> + struct mii_bus *bus;
> + int err;
> +
> + bus = devm_mdiobus_alloc_size(dev, sizeof(*priv));
> + if (!bus)
> + return -ENOMEM;
> +
> + bus->name = "Reaktek Switch MDIO Bus";
> + bus->read = realtek_mdio_read_c22;
> + bus->write = realtek_mdio_write_c22;
> + bus->read_c45 = realtek_mdio_read_c45;
> + bus->write_c45 = realtek_mdio_write_c45;
> + bus->parent = dev;
> + priv = bus->priv;
> +
> + priv->regmap = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(priv->regmap))
> + return PTR_ERR(priv->regmap);
> +
> + err = device_property_read_u32(dev, "reg", &priv->reg_base);
> + if (err)
> + return err;
> +
> + snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
> +
> + device_for_each_child_node(dev, child) {
> + u32 pn, smi_addr[2];
> +
> + err = fwnode_property_read_u32(child, "reg", &pn);
> + if (err)
> + return err;
> +
> + if (pn >= MAX_PORTS)
> + return dev_err_probe(dev, -EINVAL, "illegal port number %d\n", pn);
> +
> + err = fwnode_property_read_u32_array(child, "realtek,smi-address", smi_addr, 2);
> + if (err) {
> + smi_addr[0] = 0;
> + smi_addr[1] = pn;
> + }
> +
> + if (smi_addr[0] > MAX_SMI_BUSSES)
Hi Chris,
Should this condition be
if (smi_addr[0] >= MAX_SMI_BUSSES)
> + return dev_err_probe(dev, -EINVAL, "illegal smi bus number %d\n",
> + smi_addr[0]);
> +
> + if (smi_addr[1] > MAX_SMI_ADDR)
> + return dev_err_probe(dev, -EINVAL, "illegal smi addr %d\n", smi_addr[1]);
> +
> + if (fwnode_device_is_compatible(child, "ethernet-phy-ieee802.3-c45"))
> + priv->smi_bus_isc45[smi_addr[0]] = true;
Otherwise it seems that smi_bus_isc45 may overflow here.
Flagged by Smatch.
> +
> + priv->smi_bus[pn] = smi_addr[0];
> + priv->smi_addr[pn] = smi_addr[1];
> + }
> +
> + err = realtek_mdiobus_init(priv);
> + if (err)
> + return dev_err_probe(dev, err, "failed to initialise MDIO bus controller\n");
> +
> + err = devm_of_mdiobus_register(dev, bus, dev->of_node);
> + if (err)
> + return dev_err_probe(dev, err, "cannot register MDIO bus\n");
> +
> + return 0;
> +}
...
--
pw-bot: changes-requested
