The MDIO controller is part of the switch on the RTL9300 family of
devices. Add a $ref to the mfd binding for these devices.
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
Notes:
Changes in v2:
- None
.../bindings/mfd/realtek,rtl9301-switch.yaml | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml b/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml
index f053303ab1e6..eeb08e7435fa 100644
--- a/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml
+++ b/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml
@@ -41,6 +41,9 @@ patternProperties:
'i2c@[0-9a-f]+$':
$ref: /schemas/i2c/realtek,rtl9301-i2c.yaml#
+ 'mdio@[0-9a-f]+$':
+ $ref: /schemas/net/realtek,rtl9301-mdio.yaml#
+
required:
- compatible
- reg
@@ -110,5 +113,17 @@ examples:
};
};
};
+
+ mdio0: mdio@ca00 {
+ compatible = "realtek,rtl9301-mdio";
+ reg = <0xca00 0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@0 {
+ reg = <0>;
+ realtek,smi-address = <0 1>;
+ };
+ };
};
--
2.47.1
