[PATCH v7 00/12] MIPS: Support I6500 multi-cluster configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Taken from Paul Burton MIPS repo with minor changes from Chao-ying Fu.
Tested with 64r6el_defconfig on Boston board in 2 cluster/2 VPU and
1 cluster/4 VPU configurations.

v7:
 - Add fixes for specific CM3.5 which is used in EyeQ6H SoCs, suggested by
   Gregory Clement.
 - Re-base onto the master branch, with no functionality impact.

v6:
 - Re-base onto the master branch, with no functionality impact.
 - Correct the issue reported by the kernel test robot.

v5:
 - Drop FDC related changes (patches 12, 13, and 14).
 - Apply changes suggested by Thomas Gleixner (patches 3 and 4).
 - Add #include <linux/cpumask.h> to patch 1, suggested by Thomas Bogendoerfer.
 - Add Reviewed-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx> for the patch 08/11.
 - Add Tested-by: Serge Semin <fancer.lancer@xxxxxxxxx> for the entire series.
 - Correct some commit messages.

v4:
 - Re-base onto the master branch, with no functionality impact.
 - Refactor MIPS FDC driver in the context of multicluster support.

v3:
 - Add Reviewed-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> for the patch 02/12.
 - Add the changes requested by Marc Zyngier for the 3/12 patch.
 - Remove the patch 11/12 (a consequence of a discussion between Jiaxun Yang
   and Marc Zyngier.
 - Re-base onto the master branch, with no functionality impact.

v2:
 - Apply correct Signed-off-by to avoid confusion.

Chao-ying Fu (1):
  irqchip/mips-gic: Setup defaults in each cluster

Gregory CLEMENT (3):
  dt-bindings: mips: cpu: Add property for broken HCI information
  MIPS: CPS: Support broken HCI for multicluster
  MIPS: mobileye: dts: eyeq6h: Enable cluster support

Paul Burton (8):
  irqchip/mips-gic: Introduce for_each_online_cpu_gic()
  irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
  irqchip/mips-gic: Multi-cluster support
  clocksource: mips-gic-timer: Always use cluster 0 counter as
    clocksource
  clocksource: mips-gic-timer: Enable counter when CPUs start
  MIPS: pm-cps: Use per-CPU variables as per-CPU, not per-core
  MIPS: CPS: Introduce struct cluster_boot_config
  MIPS: CPS: Boot CPUs in secondary clusters

 .../devicetree/bindings/mips/cpus.yaml        |   6 +
 arch/mips/boot/dts/mobileye/eyeq6h.dtsi       |   1 +
 arch/mips/include/asm/mips-cm.h               |  18 ++
 arch/mips/include/asm/smp-cps.h               |   7 +-
 arch/mips/kernel/asm-offsets.c                |   3 +
 arch/mips/kernel/cps-vec.S                    |  19 +-
 arch/mips/kernel/mips-cm.c                    |   4 +-
 arch/mips/kernel/pm-cps.c                     |  35 +-
 arch/mips/kernel/smp-cps.c                    | 305 +++++++++++++++---
 drivers/clocksource/mips-gic-timer.c          |  45 ++-
 drivers/irqchip/Kconfig                       |   1 +
 drivers/irqchip/irq-mips-gic.c                | 257 ++++++++++++---
 12 files changed, 587 insertions(+), 114 deletions(-)

-- 
2.25.1





[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux