Re: [PATCH v3 1/3] dt-bindings: i2c: Add RTL9300 I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 24, 2024 at 11:02:28AM +1200, Chris Packham wrote:
> Add dtschema for the I2C controller on the RTL9300 SoC. The I2C
> controllers on this SoC are part of the "switch" block which is
> represented here as a syscon node. The SCL pins are dependent on the I2C
> controller (GPIO8 for the first controller, GPIO 17 for the second). The
> SDA pins can be assigned to either one of the I2C controllers (but not
> both).
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> 
> Notes:
>     Changes in v3:
>     - Remove parent node in example
>     - put unevaluatedProperties after required
>     - Add #address-cells and #size-cells
>     
>     Changes in v2:
>     - Use reg property for controller registers
>     - Remove global-control-offset (will be hard coded in driver)
>     - Integrated the multiplexing function. Child nodes now represent the
>       available SDA lines
> 
>  .../bindings/i2c/realtek,rtl9300-i2c.yaml     | 80 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
> new file mode 100644
> index 000000000000..979ec22e81f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/realtek,rtl9300-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek RTL I2C Controller
> +
> +maintainers:
> +  - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> +
> +description:
> +  The RTL9300 SoC has two I2C controllers. Each of these has an SCL line (which
> +  if not-used for SCL can be a GPIO). There are 8 common SDA lines that can be
> +  assigned to either I2C controller.
> +
> +properties:
> +  compatible:
> +    const: realtek,rtl9300-i2c

You need SoC-specific compatibles in the front followed by this
fallback. For each SoC.

Best regards,
Krzysztof





[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux