On Fri, 20 Sep 2024 12:09:28 +1200, Chris Packham wrote:
> Add dtschema for the I2C controller on the RTL9300 SoC. The I2C
> controllers on this SoC are part of the "switch" block which is
> represented here as a syscon node. The SCL pins are dependent on the I2C
> controller (GPIO8 for the first controller, GPIO 17 for the second). The
> SDA pins can be assigned to either one of the I2C controllers (but not
> both).
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
>
> Notes:
> Changes in v2:
> - Use reg property for controller registers
> - Remove global-control-offset (will be hard coded in driver)
> - Integrated the multiplexing function. Child nodes now represent the
> available SDA lines
>
> .../bindings/i2c/realtek,rtl9300-i2c.yaml | 82 +++++++++++++++++++
> MAINTAINERS | 6 ++
> 2 files changed, 88 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.example.dtb: /example-0/switch@1b000000: failed to match any schema with compatible: ['realtek,rtl9302c-switch', 'syscon', 'simple-mfd']
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.example.dtb: i2c@36c: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'clock-frequency' were unexpected)
from schema $id: http://devicetree.org/schemas/i2c/realtek,rtl9300-i2c.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240920000930.1828086-2-chris.packham@xxxxxxxxxxxxxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
