在2024年7月20日七月 上午11:13，Jiaxun Yang写道：
> 在2024年7月19日七月 下午10:14，Gregory CLEMENT写道：
>> Unlike most other MIPS CPUs, the I6500 CPUs have different address
>> offsets for the Global CSR Access Privilege register. In the "MIPS64
>> I6500 Multiprocessing System Programmer's Guide," it is stated that
>> "the Global CSR Access Privilege register is located at offset 0x0120"
>> in section 5.4.
>>
>> However, this is not the case for other MIPS64 CPUs such as the
>> P6600. In the "MIPS64® P6600 Multiprocessing System Software User's
>> Guide," section 6.4.2.6 states that the GCR_ACCESS register has an
>> offset of 0x0020.
>
> Hi Gregory,
>
> I confirmed this is a CM3 feature rather than CPU core (Samruai) feature.
Oh I’m not really sure if it’s CM 3.5 only.
Let me check this Monday once I can checkout old design database for I6400.
Hardware resets GCR_ACCESS to the most permissive value so I assume it’s your bootloader doing wired hacks.
Thanks
>
> Please use CM version to select register region.
> (And perhaps Cc stable for this patch?)
>
> Thanks
> - Jiaxun
>
>>
>> This fix allows to use the VP cores in SMP mode.
>>
>> Based on the work of Vladimir Kondratiev <vladimir.kondratiev@xxxxxxxxxxxx>
>>
>> Fixes: 859aeb1b0dd1 ("MIPS: Probe the I6500 CPU")
>> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
>> ---
>> arch/mips/include/asm/mips-cm.h | 4 ++++
>> arch/mips/kernel/smp-cps.c | 5 ++++-
>> 2 files changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
>> index 3d9efc802e36..41bf9b3a98fb 100644
>> --- a/arch/mips/include/asm/mips-cm.h
>> +++ b/arch/mips/include/asm/mips-cm.h
>> @@ -240,6 +240,10 @@ GCR_ACCESSOR_RO(32, 0x0d0, gic_status)
>> GCR_ACCESSOR_RO(32, 0x0f0, cpc_status)
>> #define CM_GCR_CPC_STATUS_EX BIT(0)
>>
>> +/* GCR_ACCESS - Controls core/IOCU access to GCRs */
>> +GCR_ACCESSOR_RW(32, 0x120, access_i6500)
>> +#define CM_GCR_ACCESS_ACCESSEN GENMASK(7, 0)
>> +
>> /* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1
>> */
>> GCR_ACCESSOR_RW(32, 0x130, l2_config)
>> #define CM_GCR_L2_CONFIG_BYPASS BIT(20)
>> diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
>> index e074138ffd7f..60590890b6da 100644
>> --- a/arch/mips/kernel/smp-cps.c
>> +++ b/arch/mips/kernel/smp-cps.c
>> @@ -325,7 +325,10 @@ static void boot_core(unsigned int core, unsigned
>> int vpe_id)
>> write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB);
>>
>> /* Ensure the core can access the GCRs */
>> - set_gcr_access(1 << core);
>> + if (current_cpu_type() != CPU_I6500)
>> + set_gcr_access(1 << core);
>> + else
>> + set_gcr_access_i6500(1 << core);
>>
>> if (mips_cpc_present()) {
>> /* Reset the core */
>>
>> ---
>> base-commit: 9298d51eb3af24f88b211087eb698399f9efa439
>> change-id: 20240719-smp_i6500-8cb233878c41
>>
>> Best regards,
>> --
>> Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
>
> --
> - Jiaxun
--
- Jiaxun
