On Wed, Jul 10, 2024 at 04:35:14PM +1200, Chris Packham wrote: > This series adds basic support for the RTL9302C reference board. Currently the > focus is on the CPU block stuff. I hope to get around to the DSA switch driver > eventually but this is a small start that lets me boot a mainline kernel on the > board I have. I initialiy started with code from openwrt but have paired it > down to just the clocksource driver and devicetree. > > The first two patches in this series are fixing some complaints from make > dtbs_check for some existing realtek dts files. They can be applied on their > own if desired. > > Chris Packham (10): > mips: dts: realtek: use "serial" instead of "uart" in node name > mips: dts: realtek: add device_type property to cpu node > dt-bindings: vendor-prefixes: Add Cameo Communications > dt-bindings: mips: realtek: Add rtl930x-soc compatible > dt-bindings: timer: Add schema for realtek,otto-timer > dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc > clocksource: realtek: Add timer driver for rtl-otto platforms > mips: select REALTEK_OTTO_TIMER for Realtek platforms > mips: generic: add fdt fixup for Realtek reference board > mips: dts: realtek: Add RTL9302C board > > .../realtek,rtl-intc.yaml | 20 +- > .../devicetree/bindings/mips/realtek-rtl.yaml | 4 + > .../bindings/timer/realtek,otto-timer.yaml | 63 ++++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > arch/mips/Kconfig | 1 + > arch/mips/boot/dts/realtek/Makefile | 1 + > .../cameo-rtl9302c-2x-rtl8224-2xge.dts | 73 +++++ > arch/mips/boot/dts/realtek/rtl838x.dtsi | 1 + > arch/mips/boot/dts/realtek/rtl83xx.dtsi | 4 +- > arch/mips/boot/dts/realtek/rtl930x.dtsi | 79 +++++ > arch/mips/generic/Makefile | 1 + > arch/mips/generic/board-realtek.c | 79 +++++ > drivers/clocksource/Kconfig | 10 + > drivers/clocksource/Makefile | 1 + > drivers/clocksource/timer-rtl-otto.c | 291 ++++++++++++++++++ > include/linux/cpuhotplug.h | 1 + > 16 files changed, 628 insertions(+), 3 deletions(-) > create mode 100644 Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml > create mode 100644 arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts > create mode 100644 arch/mips/boot/dts/realtek/rtl930x.dtsi > create mode 100644 arch/mips/generic/board-realtek.c > create mode 100644 drivers/clocksource/timer-rtl-otto.c applied patch 1-4, 6 and 8-10 to mips-next. Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]
