On Thu, 27 Jun 2024 16:33:14 +1200, Chris Packham wrote: > Add a compatible string for the interrupt controller found on the > rtl930x SoCs. The interrupt controller has registers for VPE1 so these > are added as a second reg cell. > > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > --- > > Notes: > Changes in v3: > - Use items to describe the regs property > Changes in v2: > - Set reg:maxItems to 2 to allow for VPE1 registers on the rtl9300. Add > a condition to enforce the old limit on other SoCs. > - Connor and Krzysztof offered acks on v1 but I think the changes here > are big enough to void those. > > .../interrupt-controller/realtek,rtl-intc.yaml | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.example.dtb: interrupt-controller@3000: reg: [[12288, 24]] is too short from schema $id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240627043317.3751996-7-chris.packham@xxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
