Hi folks,
On Sat, May 11, 2024 at 12:43:27PM +0200, Aleksandar Rikalo wrote:
> Taken from Paul Burton MIPS repo with minor changes from Chao-ying Fu.
> Tested with 64r6el_defconfig on Boston board in 2 cluster/2 VPU and
> 1 cluster/4 VPU configurations.
Finally got it tested on my P5600-based SoC. No problems has been
spotted. So for the entire patchset:
Tested-by: Serge Semin <fancer.lancer@xxxxxxxxx>
>
> v4:
> - Re-base onto the master branch, with no functionality impact.
> - Refactor MIPS FDC driver in the context of multicluster support.
I failed to see anything useful in the MIPS FDC refactoring. Besides
there is no patches utilizing the change provided in the patches 13
and 14 with the refactoring. The commits log don't well justify the
changes either. Moreover the commit log of the patch providing the
actual refactoring says "Separate the FDC driver code into two parts,
common and mips-specific." Has _MIPS_ FDC been utilized in some
non-MIPS arch, or what?
To sum up I'd drop the FDC refactoring patches from these series and
have them added to the patchset where the changes are actually needed
(if there is one).
-Serge(y)
>
> v3:
> - Add Reviewed-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> for the patch 02/12.
> - Add the changes requested by Marc Zyngier for the 3/12 patch.
> - Remove the patch 11/12 (a consequence of a discussion between Jiaxun Yang
> and Marc Zyngier.
> - Re-base onto the master branch, with no functionality impact.
>
> v2:
> - Apply correct Signed-off-by to avoid confusion.
>
> Aleksandar Rikalo (3):
> mips: Enable FDC on MIPS R6 platforms.
> mips: Move FDC driver to a separate directory
> mips: FDC driver refactor
>
> Chao-ying Fu (1):
> irqchip: mips-gic: Setup defaults in each cluster
>
> Paul Burton (10):
> MIPS: CPS: Add a couple of multi-cluster utility functions
> MIPS: GIC: Generate redirect block accessors
> irqchip: mips-gic: Introduce for_each_online_cpu_gic()
> irqchip: mips-gic: Support multi-cluster in for_each_online_cpu_gic()
> irqchip: mips-gic: Multi-cluster support
> clocksource: mips-gic-timer: Always use cluster 0 counter as
> clocksource
> clocksource: mips-gic-timer: Enable counter when CPUs start
> MIPS: pm-cps: Use per-CPU variables as per-CPU, not per-core
> MIPS: CPS: Introduce struct cluster_boot_config
> MIPS: CPS: Boot CPUs in secondary clusters
>
> arch/mips/include/asm/mips-cm.h | 18 ++
> arch/mips/include/asm/mips-cps.h | 38 +++
> arch/mips/include/asm/mips-gic.h | 50 ++-
> arch/mips/include/asm/smp-cps.h | 7 +-
> arch/mips/kernel/asm-offsets.c | 3 +
> arch/mips/kernel/cps-vec.S | 19 +-
> arch/mips/kernel/mips-cm.c | 41 ++-
> arch/mips/kernel/pm-cps.c | 35 ++-
> arch/mips/kernel/smp-cps.c | 288 ++++++++++++++----
> drivers/bus/Kconfig | 2 +-
> drivers/clocksource/mips-gic-timer.c | 45 ++-
> drivers/irqchip/Kconfig | 1 +
> drivers/irqchip/irq-mips-gic.c | 276 ++++++++++++++---
> drivers/tty/Makefile | 2 +-
> drivers/tty/mips_fdc/Makefile | 4 +
> drivers/tty/mips_fdc/ejtag-fdc-mips.c | 29 ++
> .../ejtag-fdc.c} | 66 +---
> drivers/tty/mips_fdc/ejtag-fdc.h | 55 ++++
> 18 files changed, 794 insertions(+), 185 deletions(-)
> create mode 100644 drivers/tty/mips_fdc/Makefile
> create mode 100644 drivers/tty/mips_fdc/ejtag-fdc-mips.c
> rename drivers/tty/{mips_ejtag_fdc.c => mips_fdc/ejtag-fdc.c} (92%)
> create mode 100644 drivers/tty/mips_fdc/ejtag-fdc.h
>
> --
> 2.25.1
>
