Re: [PATCH v2 4/8] dt-bindings: timer: Add schema for realtek,otto-timer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24/06/24 16:49, Krzysztof Kozlowski wrote:
> On 24/06/2024 03:22, Chris Packham wrote:
>> Add the devicetree schema for the realtek,otto-timer present on a number
>> of Realtek SoCs.
>>
>> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
>> ---
>>
>> Notes:
>>      Changes in v2:
>>      - Use specific compatible
> Where? I do not see changes.

In v1 it was rtl930x-timer, I've updated it to rtl9302-timer

>>      - Remove unnecessary label
>>      - Remove unused irq flags (interrupt controller is one-cell)
>>      - Set minItems for reg and interrupts based on compatible
>>
>>   .../bindings/timer/realtek,otto-timer.yaml    | 66 +++++++++++++++++++
>>   1 file changed, 66 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml b/Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml
>> new file mode 100644
>> index 000000000000..13ea7aa946fe
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/timer/realtek,otto-timer.yaml
>> @@ -0,0 +1,66 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/timer/realtek,otto-timer.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Realtek Otto SoCs Timer/Counter
>> +
>> +description:
>> +  Realtek SoCs support a number of timers/counters. These are used
>> +  as a per CPU clock event generator and an overall CPU clocksource.
>> +
>> +maintainers:
>> +  - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
>> +
>> +properties:
>> +  $nodename:
>> +    pattern: "^timer@[0-9a-f]+$"
>> +
>> +  compatible:
>> +    items:
>> +      - enum:
>> +          - realtek,rtl9302-timer
>> +      - const: realtek,otto-timer
>> +
>> +  reg:
>> +    maxItems: 5
> Nothing improved.
>
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 5
> Nothing improved.
>
>> +
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: realtek,rtl9302-timer
>> +    then:
>> +      properties:
>> +        reg:
>> +          minItems: 2
>> +        interrupts:
>> +          minItems: 2
> No, that's just incorrect. You do not have more than one variant, so it
> is just 2 items. Or 5 items, not 2-5.

I've been told in the past that the device-tree should describe the 
hardware. Which in this case has 5 timers. But I'm also told to give 
them names which I struggle to do because some of them aren't used.

So do you want something like this:

clocks:
     items:
         - description: CPU0 event clock
         - description: system clock source
         - description: unused
         - description: unused
         - description: unused

interrupts:
     items:
         - description: CPU0 event clock interrupt
         - description: system clock source interrupt
         - description: unused
         - description: unused
         - description: unused

>
>
> Best regards,
> Krzysztof
>
>




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux