[PATCH v7 5/5] mips: bmips: enable RAC on BMIPS4350

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Daniel González Cabanelas <dgcbueu@xxxxxxxxx>

The data RAC is left disabled by the bootloader in some SoCs, at least in
the core it boots from.
Enabling this feature increases the performance up to +30% depending on the
task.

Signed-off-by: Daniel González Cabanelas <dgcbueu@xxxxxxxxx>
Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
[ rework code and reduce code duplication ]
Acked-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
 arch/mips/kernel/smp-bmips.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 20e2fb10022d..e30342af8d91 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -598,6 +598,7 @@ asmlinkage void __weak plat_wired_tlb_setup(void)
 void bmips_cpu_setup(void)
 {
 	void __iomem __maybe_unused *cbr = bmips_cbr_addr;
+	u32 __maybe_unused rac_addr;
 	u32 __maybe_unused cfg;
 
 	switch (current_cpu_type()) {
@@ -626,6 +627,23 @@ void bmips_cpu_setup(void)
 		__raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
 		break;
 
+	case CPU_BMIPS4350:
+		rac_addr = BMIPS_RAC_CONFIG_1;
+
+		if (!(read_c0_brcm_cmt_local() & (1 << 31)))
+			rac_addr = BMIPS_RAC_CONFIG;
+
+		/* Enable data RAC */
+		cfg = __raw_readl(cbr + rac_addr);
+		__raw_writel(cfg | 0xf, cbr + rac_addr);
+		__raw_readl(cbr + rac_addr);
+
+		/* Flush stale data out of the readahead cache */
+		cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+		__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
+		__raw_readl(cbr + BMIPS_RAC_CONFIG);
+		break;
+
 	case CPU_BMIPS4380:
 		/* CBG workaround for early BMIPS4380 CPUs */
 		switch (read_c0_prid()) {
-- 
2.43.0





[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux